MPC 1/1 SPACE 1999 COMMLOCK AND STUN GUN BUILD

[MARK M3]

MPC/ Round 2 COMMLOCK & STUN GUN build up...
A spent a couple hours finishing these up( for now).
I made them so I can remove the chrome parts and replace them with aluminum parts.
I weathered the stun gun slightly.
I also allowed for the future addition of lighting.
The props will be lit as they were in the series.
Both models were air brushed with mixed TAMIYA paints.

Again, I will be lighting these to reflect their look on the series.
I can swap out the sliding stun / kill functions.
The chrome parts are held securely in place but can be removed easily for replacement with upgraded aluminum parts.
The models/props were air brushed a mixture of TAMIYA paints.
Great kits!! Never thought we would see this happen. Thanks Round 2 another home run!!
Thanks!

 

[Antsnest]

What is the diagonal dimension of the screen? Looks like an interesting LCD project there....

 

[ItalianNinja86]

Saw these over the week in my local hobby shop but hesitated.

Hows the over all quality of the kit build and finish?

 

[MARK M3]

Saw these over the week in my local hobby shop but hesitated.

Hows the over all quality of the kit build and finish?

The quality of these kits are excellent. They build up very quickly and have a lot of possibilities. I will just light them/sound as they appeared in the series, but they have given you enough room to go to the extremes on these. I never thought we would see 1/1 Props from this series and am quite thankful.

 

[MARK M3]

What is the diagonal dimension of the screen? Looks like an interesting LCD project there....

Yes indeed! I'll measure it shortly and post a picture.

 

[MARK M3]

 

[The Goon]

...I never thought we would see 1/1 Props from this series and am quite thankful.

Really nice work there Mark! Now if Round 2 would produce properly sized and proportioned kits of the Communicator and Phaser I/II from Star Trek TOS...

 

[MARK M3]

Really nice work there Mark! Now if Round 2 would produce properly sized and proportioned kits of the Communicator and Phaser I/II from Star Trek TOS...

Yes!!!!!!!

 

[MARK M3]

While I work on soldering lights on the 1:350 TOS Build, I took a break and made a correction to the 1:1 COMMLOCK build...
The screen shroud is a grey and not black!!
So I quickly mixed up some Tamiya Black and White and Airbrushed my grey on the part!
Also the interior framework of the shroud retained the black and was masked off!

Thanks!