Re: Marvel Agents of SHIELD Inhuman Diviner Obelisk prop
Thanks. You are also on the list.
Thanks, you're on the list
Thanks. You are also on the list.
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run Marvel Agents of SHIELD Inhuman Diviner Obelisk UPDATE
- Thread starter renaissance_man
- Start date
Re: Marvel Agents of SHIELD Inhuman Diviner Obelisk prop UPDATE
I'm changing my plans for this run slightly.
I'm going to be offering up 5 finished painted Diviners for $180 plus ~$20 postage.
I won't be making a mold of the original as it is very difficult to capture all of the surface detail using a two part mold without there being a seam which can affect the hexagonal pattern and cause it to be lost on some of the faces. Instead I will be scratch-building each one and applying the surface detail painstakingly over the course of a weekend for each one.
It is a long process but in the end it gives a better prop with a clean bubble free smooth professional finish as you can see in the photo. I can also clear coat the prop if desired once finished to give the prop a nice shine.
A close-up of the surface detail with the accurate hexagonal pattern.
If you are seriously interested in buying a finished diviner at the above price please post here and we can discuss payment and a timescale for production and delivery.
To those who are maybe left a little disappointed by the lack of a cast prop being offered I can only apologise but I just want to make the best replica possible.
I may look into producing a 3D print in the near future for those who don't want a finished piece but for now this run is for a finished Diviner.
I'm changing my plans for this run slightly.
I'm going to be offering up 5 finished painted Diviners for $180 plus ~$20 postage.
I won't be making a mold of the original as it is very difficult to capture all of the surface detail using a two part mold without there being a seam which can affect the hexagonal pattern and cause it to be lost on some of the faces. Instead I will be scratch-building each one and applying the surface detail painstakingly over the course of a weekend for each one.
It is a long process but in the end it gives a better prop with a clean bubble free smooth professional finish as you can see in the photo. I can also clear coat the prop if desired once finished to give the prop a nice shine.
A close-up of the surface detail with the accurate hexagonal pattern.
If you are seriously interested in buying a finished diviner at the above price please post here and we can discuss payment and a timescale for production and delivery.
To those who are maybe left a little disappointed by the lack of a cast prop being offered I can only apologise but I just want to make the best replica possible.
I may look into producing a 3D print in the near future for those who don't want a finished piece but for now this run is for a finished Diviner.
Last edited:
That's 3 out of 5 spaces filled for the first run, thank you gentlemen.
I would consider making more than 5 but only if those members interested are willing to commit as these will be made to order and since they are time consuming I would need to arrange payment and a timescale with them.
Thanks
I would consider making more than 5 but only if those members interested are willing to commit as these will be made to order and since they are time consuming I would need to arrange payment and a timescale with them.
Thanks
Stormshadow
Well-Known Member
also seriously interested in one 
also seriously interested in one
That's four out of five. thanks for your interest.
I will be making a start on the first two hopefully over the weekend I will need to order more Vinyl cut hexagonal patterned sheet.
I will be in touch with those members who have expressed an interest and will be arranging a timescale and payment with them.
Thank you..
I would like the 5th finished one. Thanks!
The first run of 5 finished Diviners is now full.
I will consider making more on an individual basis if there is any interest, but for now I want to focus on getting the first 5 made.
Thanks everyone.
I will consider making more on an individual basis if there is any interest, but for now I want to focus on getting the first 5 made.
Thanks everyone.
enterprise0216
Sr Member
YOu can put me down for a fancy finished version. Whenever you start up again no hurry. You know how to reach me thanks!
The vinyl arrived today.
I have the first 3 of the run of 5 built I just need to get onto the very time consuming task of cutting the templates, applying them to the faces of the prop, and then picking out the hexagons, each one is about a 3 day job!
- - - Updated - - -
I may do another run after these 5 but I can't promise anything as they are very labour intensive things to make.
I'll let you know.
Thanks for the interest.
I have the first 3 of the run of 5 built I just need to get onto the very time consuming task of cutting the templates, applying them to the faces of the prop, and then picking out the hexagons, each one is about a 3 day job!
- - - Updated - - -
I may do another run after these 5 but I can't promise anything as they are very labour intensive things to make.
I'll let you know.
Thanks for the interest.
enterprise0216
Sr Member
Not a problem if you can cool if not then no worries.
also seriously interested in one
also seriously interested in one
I've made the first 3 Diviners, I have the vinyl cut with the hexagon pattern I will be working on the templates over the next week, applying them and then the long process of picking out the hexagons to give the correct surface finish before painting them.
It's at this point I'm going to ask that those 5 members who expressed a serious interest get ready to pay for their Diviner.
I will be in touch with payment details in the next couple of days.
Thanks
Stormshadow
Well-Known Member
let me know, im rdy
staticweb23
Well-Known Member
Please let me know if you do another run. Interested.
Interested.Similar threads
