maided's ironman mark 42 first build: SUIT DONE NOVEMBER 30, 2012

Re: ANOTHER IRON-MAN BUILD (MK42 from the upcoming Marvel's Iron-Man 3 movie)

View attachment 123247

some updates. .

i have been figuring out the best thigh file for me to "modify" for the mark 47 (gonna rename the thread for this). . .and i found this

extremis armor leg part. .i think those files where from Eyeofsauron (correct me if i'm wrong) so i'll be using this leg/thigh part for the legs of my mark 47
 
Re: ANOTHER IRON-MAN BUILD (MK42 from the upcoming Marvel's Iron-Man 3 movie)

I just notice that I gave you shin pics, not the whole foot :facepalm.
My bad, here ya go
 
Re: ANOTHER IRON-MAN BUILD (MK42 from the upcoming Marvel's Iron-Man 3 movie)

69041_367911406624658_1194347475_n.jpg


comparison of the back. . .well it's not accurate but i'm happy with it :)
 
Re: ANOTHER IRON-MAN BUILD (MK42 from the upcoming Marvel's Iron-Man 3 movie)

Simply amazing. Are you using another pep file set as a base, or have you done so many that it's all free-hand? Just wondering, I really like the MKVIII and am looking into doing one of my own soon...again, well done ^__^
 
Re: ANOTHER IRON-MAN BUILD (MK42 from the upcoming Marvel's Iron-Man 3 movie)

Aoshi1 said:
Simply amazing. Are you using another pep file set as a base, or have you done so many that it's all free-hand? Just wondering, I really like the MKVIII and am looking into doing one of my own soon...again, well done ^__^
Click to expand...

thanks for appreciating my work :)

about your question. .yes i'm using pep based patterns for some of the parts to keep their proportions right. .i modified them right away after printing them out.

the chest is originally a mark 3 chest. .same as the back. .the ab and cod plates are freehand. .the shoulders are freehand. . the arms *biceps and forarms* are both different files. . .mark 7 biceps which also i modified after printing. .and the mark 3 forearm..same procedure print then modify. .

the rest of the suit will be done in that process too. .so i bet this build isn't really 100% freehand build. . .:popcorn
 
Re: ANOTHER IRON-MAN BUILD (MK42 from the upcoming Marvel's Iron-Man 3 movie)

ironmaided said:
the rest of the suit will be done in that process too. .so i bet this build isn't really 100% freehand build. . .:popcorn
Click to expand...

Not that it matters at all, I mean even in it's stage right now the work is just awesome.

I am going to keep an eye on this thread for sure, keep up the good work! ^__^
 
Re: ANOTHER IRON-MAN BUILD (MK42 from the upcoming Marvel's Iron-Man 3 movie)

Aoshi1 said:
Not that it matters at all, I mean even in it's stage right now the work is just awesome.

I am going to keep an eye on this thread for sure, keep up the good work! ^__^
Click to expand...

:thumbsup
 
Re: Ironman mark47 (iron-man 3) modified foam build

What type of paints did you use for the red and gold which are available locally?

Great job!!!!
 
Re: Ironman mark47 (iron-man 3) modified foam build

View attachment 125883

View attachment 125884

View attachment 125885

View attachment 125886

View attachment 125887

thread update

november 8, 2012

sup therpf.com mates!
here's a little update of my mark 47 suit build

i just finished the thighs and shins of the suit. . .it took me 4 failed attempts in order to get the finished product.
the shins are designed to fit robo's mark4-6 boot. . .so i just need to print the boot templates then add some details prior to the ones on the mark 47.
i didn't build the knees yet, i'm planning something on that part for me to do the bad-ass ironman pose. . .

i prepainted the ab and cod plates with the remaining silver paint i had to see the details a little bit better.

this suit isn't that 99.9% accurate but it works for me very well and i think the paint will make this suit a little accurate.

gonna start making/building the helmet now out of cardboard and fiberglass it. . .then i'll start working on the shoes.
 
Re: Ironman mark47 (iron-man 3) modified foam build

ironmaided said:
View attachment 125883

View attachment 125884

View attachment 125885

View attachment 125886

View attachment 125887

thread update

november 8, 2012

sup therpf.com mates!
here's a little update of my mark 47 suit build

i just finished the thighs and shins of the suit. . .it took me 4 failed attempts in order to get the finished product.
the shins are designed to fit robo's mark4-6 boot. . .so i just need to print the boot templates then add some details prior to the ones on the mark 47.
i didn't build the knees yet, i'm planning something on that part for me to do the bad-ass ironman pose. . .

i prepainted the ab and cod plates with the remaining silver paint i had to see the details a little bit better.

this suit isn't that 99.9% accurate but it works for me very well and i think the paint will make this suit a little accurate.

gonna start making/building the helmet now out of cardboard and fiberglass it. . .then i'll start working on the shoes.
Click to expand...


Really cool and looking good!!!

Where did you buy the paint and what colors did you use?

Are you planning to use filler to improve the shape and texture?

:thumbsup
 
You must log in or register to reply here.

Similar threads

Kolin86
Iron man mark 4 build (klakus cast)
2 3
Replies
41
Views
2,573
Kolin86
Kolin86
DaBuild
Iron Man mark III life size bust restoration
Replies
2
Views
691
DaBuild
DaBuild
paxtoprime94
“FABRIC” IRON MAN SUIT? (Fabric-covered foam?)
Replies
2
Views
368
Kolin86
Kolin86
paxtoprime94
Idea for Iron Man Suit that you can step right in/out of
Replies
0
Views
274
paxtoprime94
paxtoprime94
Snow Builder
Iron Man Mark I Scratch Build
2
Replies
28
Views
2,316
Malibu139
Malibu139
Back
Top