Interest KRULL - "The GLAIVE"!!! Metal-casting KIT!!!

RelicMaker said:
"KRULL"

~ The GLAIVE ~​

This is a new run of the "GLAIVE" from the 80's Cult-Classic film "KRULL"!!!

I partnered up with my friend Bruce, who is amazing at 3D modelling, to help bring to life the most accurate representation of the "Glaive" to date!

Measurements and details were meticulously replicated from photos of the original prop!!!

So, you are getting an extremely accurate casting of the original Glaive, and you can't get any closer to owning the original prop than owning this beautiful replica.

Static display piece only, with no retracting blades!

THIS WILL ONLY BE OFFERED AS A KIT!!!

The KIT includes the Chrome-Plated Bronze Metal Body w/ Blades, Green & Red Resin Inlays already applied, and 12 Swarovski Crystals!!!

You will only have to paint the 'White' accents, apply the 'Gold Leaf' on the Runes, and glue on the Crystals and Blades!

I would offer to do it, but it is very time consuming and too much for me offer at an affordable price...
...but, I am going to apply the Red and Green Resin Inlays to make it a little easier! ;)

Every detail is crisp and exactly like the original! As you can see from the photos below, you can see the details match the screen captures exactly!

Dimensions: About 15 inches in diameter

Price: (Shipping NOT Included!)
Estimated to be between $425 - 450 USD. Depending on what shipping from the factory will be...

Post here if you would like to be added to the Interest List! I'll keep this thread updated as this project progresses with the prototype and pricing!

Interest List:
1. ahoudini
2. aceg1
3. the Pawn
4. MCINTOSH275
5. Jedifyfe
6. glottis
7. THEWHATWHATNOW
8. AdamHunter
9. MANDINGALOW
10. Dumog
11. Lost in Trek
12. enterprise0216
13. clmayfield
14. dmccue
15. Shinki-Ro
16. TomVDJ
17. Whiskey
18. zort173
19. major payne
20. Treeman
21. Drakonnen
22. Auberon
23. TxBabyHuey
24. jagordon725
25. darth2518
26. ARKM
27. mbmcfarland
28. BlindVoyeur
29. MattMunson
30. Stormshadow
31. mugatu
32. Simpson77
33. el toro
34. NACZ3
35. staticweb23
36. dashrender
37. xstoys
38. xcelsior
39. Davard74
40. Astyanax
41. TKBIG
42. Nicksdad
43. Eternal Collect
44. StormFallen2
45. Hatefrost
46. Caddilac
47. TomVDJ
48. chadcham
49. Kerberos23
50. Vader1
51. Clutch
52. Jimlife3178
53. Dboboc
54. Darth Milo
55. wraithride
56. Stuey
57. MacCyber
58. Macorrie
59. BorgHive
60. Physion
61. MattMunson
62. Digital Mayhem
63. NeoRutty
64. Luuke
65. beefmalone
66. camprandall
67. Captainrob
68. Dapper
69. rad1701
70. mrsmartypants
71. Rogue428
72. hvasquez1973
73. KnightAsylum
74. staticweb23
75. Miek
76. Chuckydit
77. GoneSolo
78. EmmaInCandyland
79. KarlBud420
80. grendeltoe
81. scottjua
82. darth2518
83. faust1103
84. ahoudini
85. Stormer
86. Wakal
87. Trooper_trent
88. TridCloudwalker
89. nikmel420
90. Godric
91. eaviii
92. badraven
93. Gla008
94. goldcylon
95. Jawakilla
96. mwalker2544
97. Incrysis
98. Pitbull
99. zsherman
100. rictus
101. Gflash
102. Gremlin666
103. Dboboc
104. mccoy
105. Nicodimas
106. Johnnyb
107. Jediwannabe
108. Martin
109. geekwarrior77
110. Movie Magic
111. bshumakr
112. Zuiun
113. Doug13031
114. KodonArmada
115. PalmerBS
116. Snowtrooper
117. shpider
118.
119.
120.

View attachment 1579653

View attachment 1579654

View attachment 1579655
View attachment 1025449

View attachment 1025393

View attachment 1025394

View attachment 1025395

View attachment 1025396
Click to expand...
I'm very interested! Please put me on the list. I'm based in the UK so shipping will be more I know.
 
Too bad it will only be offered as a kit (but off course I can understand, since indeed it looks VERY time-consuming to paint in all those runes). Since I'm not that handy, I'll pass, in that case. Maybe a nice finished one will pop up in the junkyard once ;-). So please remove me from the list. Thanks!
 
As a kit I would have to pass, if you ever decide to offer a finished one I’d be happy to pay for your services but I understand your reluctance to take on that massive job, it does look awesome though, just wish I had the skills to do it justice.
 
I doubt there will ever be a better chance to get one of these, so I have no problem finishing the rest. Most of us enthusiasts will enjoy that part as well.
 
UPDATE:

Johnnyb said:
As a kit I would have to pass, if you ever decide to offer a finished one I’d be happy to pay for your services but I understand your reluctance to take on that massive job, it does look awesome though, just wish I had the skills to do it justice.
Click to expand...
wraithride said:
really bummed this is only going to be a kit, I'll have to pass as well.
Click to expand...

To finish this kit, it really doesn't require much skill... It's very easy, and just a lot of time involved for paint and glue to dry in stages...

The only thing you guys will have to do is apply Gold Leaf, Darken the Runes with an India Ink Pen, and then seal it. After that, paint certain areas with White Paint, and then glue in the crystals and blades.

I've done the hardest part for you, by pouring the Green & Red Resin Inlays.
Plus, I will provide guidance and instructions on how to complete the Glaive as well!

If you still don't feel like this kit is for you, then I completely understand! :cool: (y)

Although, I can complete the Glaive for you, but it will cost $2,000 USD... ;)
 
Last edited:
Do you have a picture of everything you get in the kit? Basically all the pieces that it will come with. I just want to know exactly what will be the final kit items. Thanks - it looks great!
 
rad1701 said:
Do you have a picture of everything you get in the kit? Basically all the pieces that it will come with. I just want to know exactly what will be the final kit items. Thanks - it looks great!
Click to expand...
I don't have picture yet, but here's a list of what is included...
1 - Chrome-Plated Metal Glaive Body (w/ Green & Red Resin Inlays)
5 - Chrome-Plated Metal Blades
2 - 35mm Clear Swarovski Crystals
10 - 5mm Red Swarovski Crystals

What you will need to buy to finish Glaive...

Gold Leaf Adhesive Pen

Gold Leaf (This particular Gold Leaf is on sheets of tissue, making it very easy to apply! Place it on the sticky surface you applied with the Adhesive Pen and it peels right off!)

Testor's White Gloss Enamel Model Paint (Plus, thin paint brushes)

Testor's Paint Thinner

Precision Tip Cotton Swabs (These are good for adding a little paint thinner and cleaning up small mistakes in tight corners, which may happen!)

SuperGlue Gel
 
Last edited:

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

Fedoraiders
Interest The KRULL Glaive with mechanism
Replies
6
Views
1,499
Fedoraiders
Fedoraiders
RelicMaker
Interest HELLBOY 2 - The "Crown of Bethmora"!!! Metal & 24K Gold-Plated!!!
Replies
16
Views
1,316
RelicMaker
RelicMaker
Nakai
Interest Dune freeman watch full metal by 12 may
Replies
19
Views
1,005
thorskywalker
thorskywalker
Jediguy
Dune 2 Freemen Watch UPDATE METAL WATCH BODY
2 3
Replies
41
Views
2,945
thorskywalker
thorskywalker
Kokanee
Limited Run SNW Phaser Metal Upgrade Parts Kit
2 3
Replies
40
Views
3,925
Vertex
Vertex
Back
Top