division 6
Master Member
You just missed a second run of name tags in the run section of the junkyard.
Way better looking than the one on shapeways.
Way better looking than the one on shapeways.
Jurassic Park/World - Merchandise Props
- Thread starter EmmaInCandyland
- Start date
division 6
Master Member
Glad to hear it. :thumbsup
Okay so I have just received the badge! And I'm so happy with them! They are 1" in diameter, but with the outer ring, it makes them bigger, so the size looks to be slightly smaller than what they should be, but it's quite cool still! What do you guys think?
They cost me £15 for the 3 of them, so if I were to make a run, I would probably make them £20 + shipping (adding up the graphic I made). If you think it's fair, I could start an interest thread, and see what we could do
The badges are a bit heavy, they seem to be in a really good quality ^^ Anyway, just let me know
They cost me £15 for the 3 of them, so if I were to make a run, I would probably make them £20 + shipping (adding up the graphic I made). If you think it's fair, I could start an interest thread, and see what we could do
The badges are a bit heavy, they seem to be in a really good quality ^^ Anyway, just let me know 
I am a student so no; I don't have any badge holder haha xD
I could do a sign like that? It would actually be funny
Ghostosaurus
New Member
Okay so I have just received the badge! And I'm so happy with them! They are 1" in diameter, but with the outer ring, it makes them bigger, so the size looks to be slightly smaller than what they should be, but it's quite cool still! What do you guys think?
http://s27.postimg.org/imczv7slv/DSC_0643.jpg
http://s27.postimg.org/k3yg6rxcj/DSC_06510.jpg
http://s27.postimg.org/hnwmsxf9v/DSC_0654.jpg
They cost me £15 for the 3 of them, so if I were to make a run, I would probably make them £20 + shipping (adding up the graphic I made). If you think it's fair, I could start an interest thread, and see what we could do
Definitely interested! I'll share the interest thread in my Jurassic groups.
Asian Inferno
New Member
Agreed...I saw pictures of the lanyard before this post and was curious who would finally take it on. Already got the lanyard and the ID Card, so I'm definitely interested in pins!
Interest thread is opened
http://www.therpf.com/showthread.php?t=249463&p=3800828#post3800828
I will have the Spinosaurus cup soon! These seem to be quite rare now!! I got really lucky x)
http://www.therpf.com/showthread.php?t=249463&p=3800828#post3800828
I will have the Spinosaurus cup soon! These seem to be quite rare now!! I got really lucky x)
So I finally got the Spinosaurus cup. Sadly it has a transparent cup. I have tried to dye it with RIT, but it didn't do much to it, only made it slightly less transparent... I have left it in the sink with warm water, as I didn't have a pan big enough to leave it on the fire. So not sure what to do now, I'm not really looking to buy a stainless steel pan just for this haha. Maybe I should just wait and see if another translucent black cup pops up.
I have also finished my brown hat. The brown caps in the movie seem to be flexfit caps. With the beige and no strap. I added this patch that I found on Etsy; it was on velcro, but unsewn it and glued it onto the cap. Michael's patches look great but always found the outside rim a bit too big. The reason why I got this one
I am now waiting on my ID card, see how my design look, hopefully the print will be good!
I have also finished my brown hat. The brown caps in the movie seem to be flexfit caps. With the beige and no strap. I added this patch that I found on Etsy; it was on velcro, but unsewn it and glued it onto the cap. Michael's patches look great but always found the outside rim a bit too big. The reason why I got this one
I am now waiting on my ID card, see how my design look, hopefully the print will be good!
Ghostosaurus
New Member
So I finally got the Spinosaurus cup. Sadly it has a transparent cup. I have tried to dye it with RIT, but it didn't do much to it, only made it slightly less transparent... I have left it in the sink with warm water, as I didn't have a pan big enough to leave it on the fire. So not sure what to do now, I'm not really looking to buy a stainless steel pan just for this haha. Maybe I should just wait and see if another translucent black cup pops up.
http://s7.postimg.org/dig2maw2z/DSC_0850.jpg
I have also finished my brown hat. The brown caps in the movie seem to be flexfit caps. With the beige and no strap. I added this patch that I found on Etsy; it was on velcro, but unsewn it and glued it onto the cap. Michael's patches look great but always found the outside rim a bit too big. The reason why I got this one
http://s7.postimg.org/j7wb6m297/DSC_058777.jpg
I am now waiting on my ID card, see how my design look, hopefully the print will be good!
Yep! The hats are brown flexfit caps. I did the same thing as you with that patch.
Mike J.
Master Member
I'm inclined to suggest painting the inside of the cup with a translucent brown paint, like one might find at the craft store for making phony stained glass... Alternatively, you could try to use Future and tint it with dye of some sort:
http://www.swannysmodels.com/Tinting.html
I Don't think Future is called Future anymore, however, it's now Pledge with Future.
http://www.swannysmodels.com/Tinting.html
I Don't think Future is called Future anymore, however, it's now Pledge with Future.
Tribal Spaceman
Active Member
I have a blue cap and polo but I'm tempted to get a brown one now for variety. Yours looks great Emma.
I have a blue cap and polo but I'm tempted to get a brown one now for variety. Yours looks great Emma.
Thanks! I liked the brown outfit more, but it's just me
! Where did you get your polo? Having trouble in finding a good one x)
Ghostosaurus
New Member
I've been looking all over for the polo shirts with no luck. Double breast pocket/epaulet collared shirts are a rarity apparently.
So I just had my card printed, quite happy with the results:
Ghostosaurus
New Member
Oh, nice! I forgot to share mine from Halloween. I printed it on cheap photo paper, so it scratches easy. I like how it came out, though.
Nice! Mine is on a PVC card, I also made the back of it:
I might do a run of my graphics for these cards, just waiting to make sure you guys received the pins first! x)
