Jurassic Park/World - Merchandise Props

Okay so I have just received the badge! And I'm so happy with them! They are 1" in diameter, but with the outer ring, it makes them bigger, so the size looks to be slightly smaller than what they should be, but it's quite cool still! What do you guys think?

DSC_0643.jpg


DSC_06510.jpg


DSC_0654.jpg


They cost me £15 for the 3 of them, so if I were to make a run, I would probably make them £20 + shipping (adding up the graphic I made). If you think it's fair, I could start an interest thread, and see what we could do :) The badges are a bit heavy, they seem to be in a really good quality ^^ Anyway, just let me know :p
 
The badge holder and pins looks great!

Do you have to use hang ID Tags at work? It would be funny to see peoples reaction to using Jurassic World one day.

When are you going make the "Isla Nubar is no longer for Humans" protester signs?
 
Fly4v said:
The badge holder and pins looks great!

Do you have to use hang ID Tags at work? It would be funny to see peoples reaction to using Jurassic World one day.

When are you going make the "Isla Nubar is no longer for Humans" protester signs?
Click to expand...

I am a student so no; I don't have any badge holder haha xD

I could do a sign like that? It would actually be funny :p
 
EmmaInCandyland said:
Okay so I have just received the badge! And I'm so happy with them! They are 1" in diameter, but with the outer ring, it makes them bigger, so the size looks to be slightly smaller than what they should be, but it's quite cool still! What do you guys think?

http://s27.postimg.org/imczv7slv/DSC_0643.jpg

http://s27.postimg.org/k3yg6rxcj/DSC_06510.jpg

http://s27.postimg.org/hnwmsxf9v/DSC_0654.jpg

They cost me £15 for the 3 of them, so if I were to make a run, I would probably make them £20 + shipping (adding up the graphic I made). If you think it's fair, I could start an interest thread, and see what we could do :) The badges are a bit heavy, they seem to be in a really good quality ^^ Anyway, just let me know :p
Click to expand...

Definitely interested! I'll share the interest thread in my Jurassic groups.
 
Agreed...I saw pictures of the lanyard before this post and was curious who would finally take it on. Already got the lanyard and the ID Card, so I'm definitely interested in pins!
 
So I finally got the Spinosaurus cup. Sadly it has a transparent cup. I have tried to dye it with RIT, but it didn't do much to it, only made it slightly less transparent... I have left it in the sink with warm water, as I didn't have a pan big enough to leave it on the fire. So not sure what to do now, I'm not really looking to buy a stainless steel pan just for this haha. Maybe I should just wait and see if another translucent black cup pops up.

DSC_0850.jpg


I have also finished my brown hat. The brown caps in the movie seem to be flexfit caps. With the beige and no strap. I added this patch that I found on Etsy; it was on velcro, but unsewn it and glued it onto the cap. Michael's patches look great but always found the outside rim a bit too big. The reason why I got this one :)

DSC_058777.jpg


I am now waiting on my ID card, see how my design look, hopefully the print will be good!
 
EmmaInCandyland said:
So I finally got the Spinosaurus cup. Sadly it has a transparent cup. I have tried to dye it with RIT, but it didn't do much to it, only made it slightly less transparent... I have left it in the sink with warm water, as I didn't have a pan big enough to leave it on the fire. So not sure what to do now, I'm not really looking to buy a stainless steel pan just for this haha. Maybe I should just wait and see if another translucent black cup pops up.

http://s7.postimg.org/dig2maw2z/DSC_0850.jpg

I have also finished my brown hat. The brown caps in the movie seem to be flexfit caps. With the beige and no strap. I added this patch that I found on Etsy; it was on velcro, but unsewn it and glued it onto the cap. Michael's patches look great but always found the outside rim a bit too big. The reason why I got this one :)

http://s7.postimg.org/j7wb6m297/DSC_058777.jpg

I am now waiting on my ID card, see how my design look, hopefully the print will be good!
Click to expand...

Yep! The hats are brown flexfit caps. I did the same thing as you with that patch.
 
I'm inclined to suggest painting the inside of the cup with a translucent brown paint, like one might find at the craft store for making phony stained glass... Alternatively, you could try to use Future and tint it with dye of some sort:

http://www.swannysmodels.com/Tinting.html

I Don't think Future is called Future anymore, however, it's now Pledge with Future.
 
Very nice, Emma! Full bleed and everything. Did you find a printer here on the board, or did you go through a commercial printer? Or do it yourself?
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

PhantomForge
Jurassic Park Cryocan- Heritage Auction Prop Details
Replies
5
Views
801
mhariush
mhariush
PHArchivist
Jurassic Park - Props, find a way... Part Two
Replies
4
Views
581
Brendan
Brendan
JurassicChaser
Jurassic Park 3 Camera Crew Hat
Replies
0
Views
265
JurassicChaser
JurassicChaser
PHArchivist
Jurassic Park - Props, find a way...
Replies
11
Views
1,376
PHArchivist
PHArchivist
ram4815162342
Paragon FX Jurassic Park John Hammond Cane Replica
Replies
13
Views
1,500
antwayne
A
Back
Top