Fetts.Sobriquet
Well-Known Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
I'll be there. Thanks for the update!
I'll be there. Thanks for the update!
Iron Man props (helmet - reactor - armor)
- Thread starter Pannaus Props
- Start date
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
......
......
Last edited:
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
ANd here you can see the pics of the 3-pieces helmet.
I'm about done today.
I'll leave two days and Monday I will prime the pieces to see if they're REALLY good to go. Then, if everything is fine, I'll prepare them for molding
here's a quick shot:
and here a few more
Iron Man Helmet 3-Pieces | Facebook
ANd here you can see the pics of the 3-pieces helmet.
I'm about done today.
I'll leave two days and Monday I will prime the pieces to see if they're REALLY good to go. Then, if everything is fine, I'll prepare them for molding
here's a quick shot:
and here a few more
Iron Man Helmet 3-Pieces | Facebook
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
Guys, just a reminder. I've received an email notification saying I had a new post in this thread. I read it and it was from a user who asked stuff like: "how much?" "when available"? I do want to point out that these kind of questions are not to be asked here. There's a thread in the JUNKYARD for these questions or you can contact me by pm.
Guys, just a reminder. I've received an email notification saying I had a new post in this thread. I read it and it was from a user who asked stuff like: "how much?" "when available"? I do want to point out that these kind of questions are not to be asked here. There's a thread in the JUNKYARD for these questions or you can contact me by pm.
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
Cooking
Cooking
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
Just a quick question guys. When you use brushes, do you save them or use a new one everytime? It looks to me like it's quite impossible to save them, unless you don't free the tip and leave the rest kinda stiff
Thanks.
Just a quick question guys. When you use brushes, do you save them or use a new one everytime? It looks to me like it's quite impossible to save them, unless you don't free the tip and leave the rest kinda stiff
Thanks.
warlickjacoby
Active Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
hmm you should show us more pics of each of the molds
im always kinda confused about molding the back piece and the main part of the helmet,
looks awesome tho! amazing work as always.
-Jacoby
hmm you should show us more pics of each of the molds
im always kinda confused about molding the back piece and the main part of the helmet,
looks awesome tho! amazing work as always.
-Jacoby
BlackKaos
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
The silicone process looks like it is coming along really nice. Can't wait to see the finished product. When I did my mould for my AOT mask I had to use a new brush for each coat because the brush got so stiff, I couldn't use it anymore. I purchase small throw away brushes from a business off the internet for a really good price.
The silicone process looks like it is coming along really nice. Can't wait to see the finished product. When I did my mould for my AOT mask I had to use a new brush for each coat because the brush got so stiff, I couldn't use it anymore. I purchase small throw away brushes from a business off the internet for a really good price.
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
That's what I do indeed
That's what I do indeed
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
I'm gonna make a video about the molding of the helmet. But it will come out in the next weeks
Anyways, the big thing I've learned is: "registration keys" and, give your rubber enough "escape" space, otherwise it'll be loose at the corners when sitting in the FG or Plasti-paste armor.
The main part needs to be closed anyways. So if you take the faceplate off, just cover the hole with paper, clay or whatever is good for you
Also, put some clay or paper right where every part of the helmet ends. This way, your rubber will cover the entire surface of the helmet and of the paper. This will give you more "resting" surface for the rubber inside its armor.
I know it's complicated in english...sorry...
But if you look at this pic, you should understand what I'm saying:
The same I did for the faceplate you need to do for anything you want to mold except things that have a single FLAT surface
and btw, i found this:
I'm gonna make a video about the molding of the helmet. But it will come out in the next weeks
Anyways, the big thing I've learned is: "registration keys" and, give your rubber enough "escape" space, otherwise it'll be loose at the corners when sitting in the FG or Plasti-paste armor.
The main part needs to be closed anyways. So if you take the faceplate off, just cover the hole with paper, clay or whatever is good for you
Also, put some clay or paper right where every part of the helmet ends. This way, your rubber will cover the entire surface of the helmet and of the paper. This will give you more "resting" surface for the rubber inside its armor.
I know it's complicated in english...sorry...
But if you look at this pic, you should understand what I'm saying:
The same I did for the faceplate you need to do for anything you want to mold except things that have a single FLAT surface
and btw, i found this:
Rysjin7717
Well-Known Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
Gemini Khan awesome build thread bra!!! I like what ya done with this helmet!!! I'll definitely checkout. Ya vblog.
Above is the helmet done with CNC and made from the original CG files of the movie.
Below is mine.
Sorry for this stupid post, but it freaks me out to see that, without computer or sculpting skills, my helmet just looks like the original ONE! So HAPPY!
Fetts.Sobriquet
Well-Known Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
You rock! The helmet is awesome. I have my copy on my desk and everyone loves it.
You rock! The helmet is awesome. I have my copy on my desk and everyone loves it.
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
thanks guys...too bad I'm encountering TOO MANY problems with my 3-pieces...things are not going as I thought they would go. I'm one try away to call it quit...
thanks guys...too bad I'm encountering TOO MANY problems with my 3-pieces...things are not going as I thought they would go. I'm one try away to call it quit...
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
I gave up. I'm selling the molds in the JY.
I gave up. I'm selling the molds in the JY.
Rysjin7717
Well-Known Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
Maybe ya need a break from it for a while, do something else. Then come back to it with a fresh perspective. You've put a lot of work into it don't give up now. Would we have cars if Henry Ford gave up on th' model T automobile? Or th' assembly line for manufacturing them? There's my 2 cents.
Maybe ya need a break from it for a while, do something else. Then come back to it with a fresh perspective. You've put a lot of work into it don't give up now. Would we have cars if Henry Ford gave up on th' model T automobile? Or th' assembly line for manufacturing them? There's my 2 cents.
Pannaus Props
Sr Member
Re: Iron Man Helmet Sintra V2.0 (V 1.0 lays in ruins)
Nah, my gotta-be-perfect-otherwise-i'm-not-gonna-be-happy attitude told me that I need to work on the master again and make new molds. So, in order to get the money back, I'm selling these, which I won't be using anymore
Thanks for your words anyway!
Nah, my gotta-be-perfect-otherwise-i'm-not-gonna-be-happy attitude told me that I need to work on the master again and make new molds. So, in order to get the money back, I'm selling these, which I won't be using anymore
Thanks for your words anyway!
Pannaus Props
Sr Member
Re: 3 parts Iron Man helmet + other projects
Ok, I'm almost there. AS you probably know, I'm just a bit PICKY...so when I decided to make the mold again, I decide to fix some problems... what do you guys think?
Back part of the helmet fixed
Ok, I'm almost there. AS you probably know, I'm just a bit PICKY...so when I decided to make the mold again, I decide to fix some problems... what do you guys think?
Back part of the helmet fixed
Similar threads
