How I made a pair of Batman 89 gloves (Picture heavy)

MrWright79

New Member
Also posted over on BTOB:thumbsup

First I bought some Olympia 103's, fins/armor-

IMG00171-20100526-1707.jpg


Then picked up these kids leather boots from a local goodwill for $4-

IMG00172-20100527-1141.jpg


Using a sharp scissors I cut the tops of the boots off-

IMG00173-20100527-1151.jpg


Then lined up the fins on the tops and using a silver sharpie I marked the spots that needed to be cut out for the fins-

IMG00175-20100527-1203.jpg


Cut-

IMG00176-20100527-1212.jpg


Fins in-

IMG00177-20100527-1235.jpg


At a local fabric store I boughtsome flexible leather adhesive-

IMG00179-20100527-2133.jpg


Putting glue on both surfaces I attached the gauntlets to the gloves, and armor to the gauntlets-

IMG00180-20100527-2203.jpg


After a day for the glue to set, here is the finished product-

CIMG3518.jpg
 
This thread is more than 6 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top