-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Done / Completed Graflex Conversion Blade Plugs ** FINAL UPDATE 5/13
- Thread starter JaxAndTheMoon
- Start date
monkeydeeznutz
New Member
Re: Graflex Conversion Blade Plugs
monkeydeeznutz--GBA--1.5--white/clear--CU--W please! When do we send payments? Sorry, I'm pretty new to sabers.
monkeydeeznutz--GBA--1.5--white/clear--CU--W please! When do we send payments? Sorry, I'm pretty new to sabers.
Last edited:
Fett 4 Real
Sr Member
Re: Graflex Conversion Blade Plugs
disregard
disregard
Last edited:
division 6
Master Member
Re: Graflex Conversion Blade Plugs
Since I went with black milling down is fine with me.
Since I went with black milling down is fine with me.
Re: Graflex Conversion Blade Plugs
I would hate to do this, but is there any way to change my order. I got rid of my 2.0 for a real Graflex. If you cant, no big deal, I will be happy with my originals.
tomm1999-- GBA -- 1.5" BLK -- B -P
tomm1999-- GBA -- 1.5" BLK -- B -W
tomm1999-- 2.0 -- 1.5" BLK -- B -P
I would hate to do this, but is there any way to change my order. I got rid of my 2.0 for a real Graflex. If you cant, no big deal, I will be happy with my originals.
tomm1999-- GBA -- 1.5" BLK -- B -P
tomm1999-- GBA -- 1.5" BLK -- B -W
tomm1999-- 2.0 -- 1.5" BLK -- B -P
Last edited by a moderator:
JaxAndTheMoon
Sr Member
Last edited by a moderator:
ViperDeCobray
Active Member
Re: Graflex Conversion Blade Plugs
ViperDeCobray-- 2.0-- 1.5inch-- clear-- CU -P
ViperDeCobray-- 2.0-- 1.5inch-- clear-- CU -P
Fett 4 Real
Sr Member
Re: Graflex Conversion Blade Plugs
Fett 4 Real -- 2.0 - 1.5" BLK - AL-W
Fett 4 Real -- 2.0 - 1.5" BLK - AL-W
Last edited:
IkarosReve
New Member
Re: Graflex Conversion Blade Plugs
After seeing the new lit up photos can I change mine to white/clear, so:
IkarosReve- 2.0 -- 1.5" -- CU-P
Keep up the great work!
After seeing the new lit up photos can I change mine to white/clear, so:
IkarosReve- 2.0 -- 1.5" -- CU-P
Keep up the great work!
Ikujinonai
New Member
Re: Graflex Conversion Blade Plugs
Would it be OK if I changed my request from a 2.0 to a GBA? I've decided to go for a 1" interior diameter now.
Ikujinonai -- GBA -- 1.5" -- CU-P
Would it be OK if I changed my request from a 2.0 to a GBA? I've decided to go for a 1" interior diameter now.
Ikujinonai -- GBA -- 1.5" -- CU-P
punkpigpen
Member
Re: Graflex Conversion Blade Plugs
If it's ok to add me to the list please!
punkpigpen-- 2.0-- 1.5"-- CU-P
If it's ok to add me to the list please!
punkpigpen-- 2.0-- 1.5"-- CU-P
Last edited:
Grim Sleeper
New Member
Re: Graflex Conversion Blade Plugs
I'll most likely take three but definitely a minimum of two all
Grim Sleeper-- 2.0 -- 1" CLEAR-- AL-P
I'll most likely take three but definitely a minimum of two all
Grim Sleeper-- 2.0 -- 1" CLEAR-- AL-P
Last edited by a moderator:
Grim Sleeper
New Member
Re: Graflex Conversion Blade Plugs
Actually, definitely make that three for me please. All as previously noted. Thanks!
Sent from my iPhone using Tapatalk
Actually, definitely make that three for me please. All as previously noted. Thanks!
Sent from my iPhone using Tapatalk
JaxAndTheMoon
Sr Member
Re: Graflex Conversion Blade Plugs
Alright guys, so the past few weeks, I've had some small hang ups with this project, including ordering stock, things running out, things taking too long to ship, further complications in my own life and Schrodinger555's as well. But now that we've both more or less caught back up to the same page, we're going to be starting final production for these!
The list has been updated with a few important things:
1. We've had a few drops from the first list, so those have been filled in with those on the wait list.
2. I've turned the second run into just a standard list. The plan after this run is more or less leaning to the possibility of being more of a "made to order" run instead, since it seems to be easier on for it. The list is now used to fill in the names of those that drop in case there are more.
So check the names and such, and we'll keep you guys updated.
Alright guys, so the past few weeks, I've had some small hang ups with this project, including ordering stock, things running out, things taking too long to ship, further complications in my own life and Schrodinger555's as well. But now that we've both more or less caught back up to the same page, we're going to be starting final production for these!
The list has been updated with a few important things:
1. We've had a few drops from the first list, so those have been filled in with those on the wait list.
2. I've turned the second run into just a standard list. The plan after this run is more or less leaning to the possibility of being more of a "made to order" run instead, since it seems to be easier on for it. The list is now used to fill in the names of those that drop in case there are more.
So check the names and such, and we'll keep you guys updated.
