Done / Completed Dr. Who Missy's Bracelet from Death in Heaven

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

TheRocketeer

Master Member
RPF PREMIUM MEMBER
While I was looking for reference on Missy's device I ran across this concept and thought I should make one up :)

So I modeled it up off the concept art and printed it out.. want to know if there's enough interest to mold and cast it up.

I would cold cast it and possibly have some holes for LEDs and a battery..
I wast thinking $40 for the static prop and maybe $65 for one set up for electronics?

Here are a few pics. Concept, 3D model and the printed model

Missy's bracelet.jpg Bracelet_Print.jpg

If your interested please post up and let me know if you would be more interested in a static prop or one with lights :)


Oh and just to update everyone..This is a kit. It will need buffing for the cold cast and then some paint for the jewels. The light up one will need you to install the lights/battery/switch. I will supply all the things needed.
 
Last edited:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

TheRocketeer

Master Member
RPF PREMIUM MEMBER
Ok added, yeah I've been looking for some super small square red lights to go in between the jewel rings like the show.. I think I may have found some that will work if this gets off the ground :)
Add me to the list. Flashy version if you can keep it to $70 or under, otherwise just the static. :)
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Britgeekgrrl

Member
RPF PREMIUM MEMBER
I'm going to share this thread with some chums who I'm pretty sure would be interested. Maybe something will come of it.
 

janarchy

New Member
Just joined (thanks to a post at dw_cosplay on Livejournal) so I could let you know I'd definitely be interested in the static prop.
 

TheRocketeer

Master Member
RPF PREMIUM MEMBER
Thanks for sharing :)
I'm going to share this thread with some chums who I'm pretty sure would be interested. Maybe something will come of it.
Welcome to the RPF :) I couldnt find that post.. I'll mark you down.
Just joined (thanks to a post at dw_cosplay on Livejournal) so I could let you know I'd definitely be interested in the static prop.

OK more interest is needed, usually 10 min, and I count 3 so far.. I will keep this up as long as needed though as I have the print ready to get mastered.
 

janarchy

New Member
Thanks for sharing :)


Welcome to the RPF :) I couldnt find that post.. I'll mark you down.



OK more interest is needed, usually 10 min, and I count 3 so far.. I will keep this up as long as needed though as I have the print ready to get mastered.
Thanks so much. If you'd like, I can share this with a few other places as well.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

DigiGal

Active Member
I'm in, my preference would be for no lights but would need to see a finished lit one before final decision.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

TheRocketeer

Master Member
RPF PREMIUM MEMBER
Ok on the list. What will probably happen is it will have all the holes and cavities for the electronics, and the ones that light up will come with the lights and batteries. There isn't enough interest to make 2 different ones.
I'm interested in the non-static one.
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top