spazzman31337
Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
This is awesome thank you
This is awesome thank you
Darkside501st's Iron Man Mk VII pepakura files - Password in First Post
- Thread starter darkside501st
- Start date
codriver
Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
Hey people i just want to say that Iron Man 3 already on cinema in Europe.
Of course that i wont say anything about the film but i have to alert all the people to stay in seat all the way till the end off credits ;-)
;-)
Hey people i just want to say that Iron Man 3 already on cinema in Europe.
Of course that i wont say anything about the film but i have to alert all the people to stay in seat all the way till the end off credits ;-)
;-)
Syrus54
Sr Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
Thanks Cod, I'll DEFINATELY do that.
But there's an issue here in the U.S... Disney wont allow ticket presales yet..... Dunno why... I'm going nuts waiting...
If they dont start sales soon, I'm not even gonna goto the theatre. I'll just wait for the blu-ray.
Should be out by Nov. 3rd.
Thanks Cod, I'll DEFINATELY do that.
But there's an issue here in the U.S... Disney wont allow ticket presales yet..... Dunno why... I'm going nuts waiting...
If they dont start sales soon, I'm not even gonna goto the theatre. I'll just wait for the blu-ray.
Should be out by Nov. 3rd.
Last edited:
Barros
New Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
you couldn't pre-order tickets thru amc and regal, two big theaters names. i guess you can not starting today, but i was able to pre-order my imax tickets last week. can't wait.
you couldn't pre-order tickets thru amc and regal, two big theaters names. i guess you can not starting today, but i was able to pre-order my imax tickets last week. can't wait.
typewriter
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
Big fan of your work darkside! hope you finish V2 files soon
Keep it up, we are depending on you
Big fan of your work darkside! hope you finish V2 files soon
Keep it up, we are depending on you
Roberto Cerves
New Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
Hello guys. I bought a cameo silhouettes but I have a problem with the files in the cutting of Darkside501, the cut is accurate but not complete, as you can see from my pictures. I tested other pep files that cuts correctly. Specific use ISO A4 paper and the blade exclude a part of the design and the cameo finishes work. Cutted with Pepakura Viewer Cameo full version. Tested on all files pep Darkside. Thanks in advance to all .. I'm desperate. Sorry for my bad english ..
Hello guys. I bought a cameo silhouettes but I have a problem with the files in the cutting of Darkside501, the cut is accurate but not complete, as you can see from my pictures. I tested other pep files that cuts correctly. Specific use ISO A4 paper and the blade exclude a part of the design and the cameo finishes work. Cutted with Pepakura Viewer Cameo full version. Tested on all files pep Darkside. Thanks in advance to all .. I'm desperate. Sorry for my bad english ..
jasonamigo23
Well-Known Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
I have general question. After the resin and fiberglass stage, most people use bondo. But I've also heard that for the tiny imperfections that bondo can't cover, some people use what's called spot filler. What exactly is spot filler? Is it another type of car body filler? Or is is wood putty, wall putty or something else entirely?
I have general question. After the resin and fiberglass stage, most people use bondo. But I've also heard that for the tiny imperfections that bondo can't cover, some people use what's called spot filler. What exactly is spot filler? Is it another type of car body filler? Or is is wood putty, wall putty or something else entirely?
streetsoul
Sr Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
spot filler in the uk is a more smooth body filler and alot easier to get in them realy small spots , also if you wanted to save money you could mix a lil bit of resin in with the body filler to make it more runny or smoother to get in them spots hope it helps
spot filler in the uk is a more smooth body filler and alot easier to get in them realy small spots , also if you wanted to save money you could mix a lil bit of resin in with the body filler to make it more runny or smoother to get in them spots hope it helps
jasonamigo23
Well-Known Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
I see. Thanks But do when you mix the resin with it, it has to be resin with the hardener, right? Not just the resin itself?
I see. Thanks
But do when you mix the resin with it, it has to be resin with the hardener, right? Not just the resin itself?
streetsoul
Sr Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
your welcome and it would be body filler then resin and then hardener dont mix the hadener with the resin first
I see. Thanks
your welcome and it would be body filler then resin and then hardener dont mix the hadener with the resin first
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
There is a help thread for the Cameo somewhere on this forum. It would be good to post your issue in there. If I had to guess I would say that it looks like a margin problem. Check to see... are the files converted to A4 in pep designer before you open them in Pep Viewer for Cameo? Are all the pieces within the dotted lines on the pages of Pep Viewer for Cameo? Do you have the correct paper setting in the PV for Cameo? What are the margin settings at (should be around 10 on every side)? Hope you get it figured out.
There is a help thread for the Cameo somewhere on this forum. It would be good to post your issue in there. If I had to guess I would say that it looks like a margin problem. Check to see... are the files converted to A4 in pep designer before you open them in Pep Viewer for Cameo? Are all the pieces within the dotted lines on the pages of Pep Viewer for Cameo? Do you have the correct paper setting in the PV for Cameo? What are the margin settings at (should be around 10 on every side)? Hope you get it figured out.
Roberto Cerves
New Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
10
10
10
Both on screen and when I print (A4) I see the image below. I have highlighted the area that does not cut.
P.s. When resize pep on 50% all cut correctly
TNX TNX :cry
II can not verify because Pep designer asks me for a password.. How can I do? How to convert?
yes
Yes, ISO A4 with cutting mat
10
10
10
10
Both on screen and when I print (A4) I see the image below. I have highlighted the area that does not cut.
P.s. When resize pep on 50% all cut correctly
TNX TNX :cry
Last edited:
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
Sorry mate, I don't know what else to check. It looks like you got the right file. The helmet is available on A4 and Letter so if you downloaded the A4 files then you should be good to go. Post in that other thread I mentioned and see if anyone else
Helmet is coming along nicely. Looks like you will get some good results.
Sorry mate, I don't know what else to check. It looks like you got the right file. The helmet is available on A4 and Letter so if you downloaded the A4 files then you should be good to go. Post in that other thread I mentioned and see if anyone else
Helmet is coming along nicely. Looks like you will get some good results.
Roberto Cerves
New Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
Tnx Darkside.
I post in the other thread as suggested
Then I hope to publish my first job with your pep :thumbsup
Tnx Darkside.
I post in the other thread as suggested
Then I hope to publish my first job with your pep :thumbsup
jasonamigo23
Well-Known Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
Nice! Very clean, and you used the right amount of body filler. Good job :thumbsup
Nice! Very clean, and you used the right amount of body filler. Good job :thumbsup
typewriter
Active Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
Thats some pretty helmet man, keep it up!
Thats some pretty helmet man, keep it up!
agassparkle
Member
Re: Darkside501st's Iron Man Mk VII pepakura files - New Pics pg 100!!
Can you give a little bit more detail of how much to mix ? AS hardener you mean the bondo hardener or resin hardener ? And i am using exposi resin , is it ok too ?
Can you give a little bit more detail of how much to mix ? AS hardener you mean the bondo hardener or resin hardener ? And i am using exposi resin , is it ok too ?
Similar threads
