Unlimited Run Dark Matter Props - One Stop Claw Shop - Metallic, Bone, & More - Still taking orders

Re: Darkside501st's Wolverine Claws - Feb closed, post interest for next run

I got my claws saturday. I got one set done, they are awesome! Great Job! My only complaint is that there is a nut missing from a grip so thats why I only have one set finished
 
Re: Darkside501st's Wolverine Claws - Feb closed, post interest for next run

If/when ya do the next run, I would love a set.
 
Re: Darkside501st's Wolverine Claws - Feb closed, post interest for next run

batmanbeyond96 said:
I got my claws saturday. I got one set done, they are awesome! Great Job! My only complaint is that there is a nut missing from a grip so thats why I only have one set finished
Click to expand...


That is strange... did you check through the package to make sure it wasn't somewhere in there? If it somehow fell off the grip before I wrapped it up I do apologize. If you need to get another one then I got these from Ace Hardware and they are 6-32 machine thread nuts. Any 6-32 machine thread nut should fit... the size is pretty standard. I would be more than happy to work with you for the trouble and the cost of replacing the nut. Send me a PM if you want to talk about that.

joshspiderman23 said:
cant wait till mine are done
Click to expand...

I finished a set of your claws this weekend... the second set you ordered should be done soon and then I will ship them out.

Ren said:
If/when ya do the next run, I would love a set.
Click to expand...

Sure I will add you to the interest list for the next run. Thanks.
 
Last edited:
Re: Darkside501st's Wolverine Claws - Feb closed, post interest for next run

Yea I checked, Its all good all I need is the size nut and gave it so everythings hunkydory. Thanks Darkside
 
Re: Darkside501st's Wolverine Claws - Feb closed, post interest for next run

batmanbeyond96 said:
Yea I checked, Its all good all I need is the size nut and gave it so everythings hunkydory. Thanks Darkside
Click to expand...

Ok, good. I am glad things worked out.



I got the other set done and will be shipping both of them out tomorrow for you joshspiderman23.
 
Re: Darkside501st's Wolverine Claws - Feb closed, post interest for next run

I have decided to do a small run of no more than 3 sets of claws during the 2nd week of March... I need some spending money for the convention I will be going to, lol :love

Interest List for the next run
1. teragon
2. SawyerLockeJack
3. Ren

You guys have posted interest in the next run... if you want to get in on this then let me know and send in your payment.
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots

Ok I would like a set please! Payment sent! Just put me in where you can please and thanks!
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots

Kodiakc said:
Ok I would like a set please! Payment sent! Just put me in where you can please and thanks!
Click to expand...

Payment received... put you on one of the 3 spots for the March Run. Thanks. These will ship out mid March.
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots - 1 left

Got your payment Ren. You are in the 2nd spot on the March Run... They will ship out mid March.

Only one spot left on the March Run.... hurry up and grab it while it is still available.
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots - 1 left

@crimsonjester - Got your claws cast this weekend... I just have to finish the castings then I will be sending them out tomorrow probably.

I still have one spot open on the March Run.
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots - 1 left

Got mine in today and already assembled one. These are sick! Can't wait to finish the left hand (y)thumbsup
8530914396_351973850c.jpg

8530913448_d6bffe8dd7.jpg
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots - 1 left

joshspiderman23 said:
Got mine in today and already assembled one. These are sick! Can't wait to finish the left hand (y)thumbsup
Click to expand...

Awesome... they look great! Those are some good pics too.

On a side note... One of the things I heard quite often when I was looking at making these claws is that a lot of people were saying that all the claws they have tried are uncomfortable and hurt their hands. That is one of the major objectives I had with these claws... I wanted to make them comfortable to wear. So maybe some of you folks that have gotten my claws can provide some feedback on whether or not you think they are comfortable to wear/hold. Thanks.
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots - 1 left

This is how my mold look like. But i my casting sit not as clean as your. Thats my problem. the top of the blade got those dents from i don know where and how the cast gets it. Any advice? Thanks.
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots - 1 left

Ericqueen said:
This is how my mold look like. But i my casting sit not as clean as your. Thats my problem. the top of the blade got those dents from i don know where and how the cast gets it. Any advice? Thanks.
Click to expand...

Are you just referring to minor imperfections in the surface of the casting or some other issue like trapped air bubbles? Are there any visible imperfections in the surface of the mold? What products did you use for the mold and casting?
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots - 1 left

darkside501st said:
Are you just referring to minor imperfections in the surface of the casting or some other issue like trapped air bubbles? Are there any visible imperfections in the surface of the mold? What products did you use for the mold and casting?
Click to expand...

Yes. The minor image imperfections. But seems major. Yours seem like you dont need to clean it up that much. Im using silicone rubber for 2 part mold and resin for casting. Im new at this. I just watch some youtube videos to learn how to do it.
 
Re: Darkside501st's Wolverine Claws - March Run - only 3 spots - 1 left

Ericqueen said:
Yes. The minor image imperfections. But seems major. Yours seem like you dont need to clean it up that much. Im using silicone rubber for 2 part mold and resin for casting. Im new at this. I just watch some youtube videos to learn how to do it.
Click to expand...

Well, every cast will have some flashing anytime you have a two part mold. If you are getting pits or globs on the cast then there are most likely some imperfections in the mold. This could be due to the type of silicone that was used because a lot of silicones require a vacuum pump to remove the air trapped in the silicone. You may have to make a new mold with a silicone that is designed for use without a vacuum pump.

If you are getting shinny circular 'holes' in the cast then you are getting air trapped while you are pouring the resin. You can try to pour at a different angle so that the resin 'rolls/runs' down the top of the claw to the bottom and then fills the mold from the bottom - up.

I hope that helps, good luck.

Without seeing it in person I couldn't say what the issue is.
 
You must log in or register to reply here.

Similar threads

1StopProps
Interest Harry Potter Wizard Sorting Hat
Replies
16
Views
1,425
1StopProps
1StopProps
davidJurassic
Jurassic Park Screen Used Raptor Claw
Replies
4
Views
1,526
Ceebrupt
Ceebrupt
JOATRASH FX
Done / Completed RUN IS ON Brisco County Jr. Colt SAA "Dragon" grips...
2
Replies
29
Views
2,938
JOATRASH FX
JOATRASH FX
StaggzCosplay
BioShock 2 Subject Delta Helmet (Kit or Finished)
Replies
2
Views
333
StaggzCosplay
StaggzCosplay
1StopProps
Interest Shadow Exchange Runestone from Solo Leveling Arise
Replies
9
Views
842
1StopProps
1StopProps
Back
Top