-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run CW Flash V2 & Reverse FLash cowls Limited Run
- Thread starter TheRocketeer
- Start date
YuZheng
Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
Haha gotta give you some respect for always reminding people about the Reverse Flash cowl. Hopefully the runs happens cause of you! Cheers haha
Last edited by a moderator:
DocJay
New Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
I'm right there with you! Already added my interest. Just waiting for the deposit list to go up.
I'm right there with you! Already added my interest. Just waiting for the deposit list to go up.
Last edited by a moderator:
TheRocketeer
Master Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
OK here are some pics of the first cast..trimmed up and quickly put on a 24" head cast (thanks TJack
I forgot to include the bolts in the pics..but I am super busy..if people really need pics of the bolts I can add later.. I'm gonna try to get GeneralFrosty to paint this up for me asap
OK here are some pics of the first cast..trimmed up and quickly put on a 24" head cast (thanks TJack
I forgot to include the bolts in the pics..but I am super busy..if people really need pics of the bolts I can add later.. I'm gonna try to get GeneralFrosty to paint this up for me asap
TheRocketeer
Master Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
Tomorrow is the last day for deposits on the Flash V2.. Like the title says
I am not making the RF yet.. If you show interest I will send out PM's to those interested when I am ready to start that one.
Tomorrow is the last day for deposits on the Flash V2.. Like the title says
I am not making the RF yet.. If you show interest I will send out PM's to those interested when I am ready to start that one.
reliken
New Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
Got it, okay. I see you also temporarily reopened the run of the one-piece cowl. What is the primary difference between the 2? Would you say V2 is a lot better?
I am 100% interested in the RF cowl, it is the V2 I am on the fence about. Hopefully I can get things figured out by tomorrow!
Tomorrow is the last day for deposits on the Flash V2.. Like the title says
I am not making the RF yet.. If you show interest I will send out PM's to those interested when I am ready to start that one.
Got it, okay. I see you also temporarily reopened the run of the one-piece cowl. What is the primary difference between the 2? Would you say V2 is a lot better?
I am 100% interested in the RF cowl, it is the V2 I am on the fence about. Hopefully I can get things figured out by tomorrow!
TheRocketeer
Master Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
I would say that all 3 are screen accurate... To explain the cowl in the show had a V! which was a one piece cowl..I made that..they changed to a 2 piece cowl on eps 4-5 or something like that? SO I made this new one..but nether is a lot better than the other...just different..lots different if you compare
I would say that all 3 are screen accurate... To explain the cowl in the show had a V! which was a one piece cowl..I made that..they changed to a 2 piece cowl on eps 4-5 or something like that? SO I made this new one..but nether is a lot better than the other...just different..lots different if you compare
reliken
New Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
Okay great, thank you. Two last questions...
#1) You mention that one will need to install the zipper themselves - do you have recommended materials or a recommended method for doing this? I've never installed a zipper before and wouldn't want to risk damaging the cowl by doing a shoddy job.
#2) For the single piece cowls (both RF and Flash 1), is there a trick to getting them on/off? Or do you just need to pull hard? Ha ha.
Thanks again for all your helpful information!
I would say that all 3 are screen accurate... To explain the cowl in the show had a V! which was a one piece cowl..I made that..they changed to a 2 piece cowl on eps 4-5 or something like that? SO I made this new one..but nether is a lot better than the other...just different..lots different if you compare
Okay great, thank you. Two last questions...
#1) You mention that one will need to install the zipper themselves - do you have recommended materials or a recommended method for doing this? I've never installed a zipper before and wouldn't want to risk damaging the cowl by doing a shoddy job.
#2) For the single piece cowls (both RF and Flash 1), is there a trick to getting them on/off? Or do you just need to pull hard? Ha ha.
Thanks again for all your helpful information!
TheRocketeer
Master Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
No idea about the zippers, that's why I said people would need to do it themselves
And for pulling it on....that's why you cut it up the back and put the zipper in.
No idea about the zippers, that's why I said people would need to do it themselves
And for pulling it on....that's why you cut it up the back and put the zipper in.
reliken
New Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
Ahh okay. I guess it's hard for me to say just based on the pictures - is there a specific spot for cutting that will allow the cut to be hidden and the zipper to be relatively hidden? Sorry if these all seem like dumb questions...No idea about the zippers, that's why I said people would need to do it themselves
And for pulling it on....that's why you cut it up the back and put the zipper in.
TheRocketeer
Master Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
You should really use the seach function and read some threads. I believe it the right groove up the back of the neck. But out seach around some threads. I see your new here.. Do read some stuff and learn about the community. People will offer information, but you need to do some leg work too
You should really use the seach function and read some threads. I believe it the right groove up the back of the neck. But out seach around some threads. I see your new here.. Do read some stuff and learn about the community. People will offer information, but you need to do some leg work too
NOMAD202
Well-Known Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
IM me, I'll help you out. I know what it's like to be new and look for answers only to be stonewalled by other members telling you to use the search function.
IM me, I'll help you out. I know what it's like to be new and look for answers only to be stonewalled by other members telling you to use the search function.
TheRocketeer
Master Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
Hey I did not stonewall him. I told him where the zipper needed to be installed. And to use the search function and read a bit. So please don't be starting this in my thread...
Its a sales thread not a build or question thread. And the only way I learned there was a zipper is from reading other threads...
Hey I did not stonewall him. I told him where the zipper needed to be installed. And to use the search function and read a bit. So please don't be starting this in my thread...
Its a sales thread not a build or question thread. And the only way I learned there was a zipper is from reading other threads...
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
You weren't mean or anything. Just giving good advice. Let's forget about it and move on No drama in this thread
You weren't mean or anything. Just giving good advice. Let's forget about it and move on
No drama in this thread
PCorder086
New Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
I cant wait to wear this ! looks phenomal
I cant wait to wear this ! looks phenomal
OK here are some pics of the first cast..trimmed up and quickly put on a 24" head cast (thanks TJack
I forgot to include the bolts in the pics..but I am super busy..if people really need pics of the bolts I can add later.. I'm gonna try to get GeneralFrosty to paint this up for me asap
View attachment 480241View attachment 480242View attachment 480240
TheRocketeer
Master Member
Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**
Thanks it turned out well
its really a cast to clean out the mold..so its not that nice and I hope so too, the head its on is 24" so we know the answer to that question
Thanks
it turned out well its really a cast to clean out the mold..so its not that nice and I hope so too, the head its on is 24" so we know the answer to that question Similar threads
