Limited Run CW Flash V2 & Reverse FLash cowls Limited Run

[Linero]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

Hey C,

Never got any PM?

 

[Mr Mold Maker]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

EDIT: Apologies for posting in an interest thread, not a build thread.

 

[dgdve]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

As stated in my PM's awhile ago.. Still very interested in the Reverse if this ever happens.. Don't want to bug a busy man so please just don't forget me?! ("Ready to pay" and all that)

 

[TheRocketeer]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

If there's enough interest I will. Only if I can get another 10...gotta focus on this one first

could you please do another run like this sometime in the summer? I'm broke at the moment but realllllllly interested!

Lol apparently it is

Readin's for chumps!

Yep soon. Flash is under silicone today/tomorrow. Once I know the mold turned out I will.

Will you be taking the rest of the payments soon? I was out if town and just wanted to make sure I didn't miss anything.

I'll send you one didn't have you on my list.

Hey C,

Never got any PM?

I do as accurate as I can. But the Flash is already well under way on the molding. If the RF happens I will look at that master. Could be the lighting/shadows as well.

I'm sure you're already aware, but recently we've been getting quite a few nice closeups of the cowls. One thing I notice is the "cheek bones" have a much sharper angle than your masters have. More on the RF, but on the Flash as well. Your cowls are almost dead on. I know at this point it's being nit picky, but as you said.. you make it as accurate as you can.. If it takes a little more time I think it's absolutely worth it.

View attachment 476860

I'll send out PMs and post up here when/if the RF happens. One at a time

As stated in my PM's awhile ago.. Still very interested in the Reverse if this ever happens.. Don't want to bug a busy man so please just don't forget me?! ("Ready to pay" and all that)

 

[JKRIB]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

Just shared this on a couple of Facebook pages. Hopefully, we can get more interest in these!

 

[TheRocketeer]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

Sounds good The Flash is going ahead either way

Just shared this on a couple of Facebook pages. Hopefully, we can get more interest in these!

Also I do molds a bit different so I was able to take the "helemt" part of the Flash 2.0 cowl and fix up a few things as well as make the ridge under the eye a bit sharper ..some more texturing work and a little more patience... I will be able to finish the molds by the weekend I hope

 

[JKRIB]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

About how many more would we need for Reverse, you think?

 

[TheRocketeer]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

well technically there are none right now.. but I want to get all my molds done that I have on the go right now..then I will send out PMs on the RF to see about deposits

About how many more would we need for Reverse, you think?

 

[JKRIB]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

Okie doke. Sounds good to me :thumbsup

well technically there are none right now.. but I want to get all my molds done that I have on the go right now..then I will send out PMs on the RF to see about deposits

 

[paulv70]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

I am definitely interested in a V1 or V2 if they're still available.

 

[JKRIB]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

Bumping this just because it's going down the list

 

[TheRocketeer]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

OK so I poured the molds late last night and demolded the "helmet" section..looks good so far. I will let the silicone breathe a bit once the neck is demolded and then run a cowl and post some pics. I'm opening up some spots for this..cause ist the Flash finale today but only for a couple days..then taking full payments this weekend..

Okie doke. Sounds good to me :thumbsup

Thanks we figured it out

I am definitely interested in a V1 or V2 if they're still available.

Lol good to keep it at the top

Bumping this just because it's going down the list

 

[kw1968]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**

im interested in the flash two piece cowl 24" if there still a spot left

 

[JKRIB]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 5th**

Awesome and that's nice of ya Will have the cash ready!

 

[YuZheng]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**

Will have the cash ready too. Even more hyped up after watching the season finale of the flash, thanks for the update Rocketeer.

 

[Spiderkiller11]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**

Gosh this is awesome!
I have cash ready to go this time. No way, I'm gonna miss this deadline

 

[ANBUspidey]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**

Ditto also have cash ready if needed. Season finale was great!!!!

 

[Fulmetal75]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**

On the flash v2, Is there an open space under the chin?
it may be because it's late, but I'm not quite seeing it together where the neck meets the chin.
Do you understand what I'm talking about?

 

[deadpool14]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**

Hi are you still selling your flash cowls, if so I wold like to purchase one of your red two part cowls I would only need the cowl not the lighting bolts as I have made some already

 

[TheRocketeer]

Re: CW Flash V2 & RF cowls from 3D scan **taking deposits on Flash till May 22nd**

Already communicated

im interested in the flash two piece cowl 24" if there still a spot left

Sounds good

Awesome and that's nice of ya Will have the cash ready!

No problem.. bit too hot to run a cowl during the day..I hope to run one tonight and have some pics

Will have the cash ready too. Even more hyped up after watching the season finale of the flash, thanks for the update Rocketeer.

Sounds good...but your not on my deposit list..so you might wanna send a deposit to get on the list

Gosh this is awesome!
I have cash ready to go this time. No way, I'm gonna miss this deadline

good to hear....now I can get the whole season and actually watch an episode

Ditto also have cash ready if needed. Season finale was great!!!!

Not sure what you mean? The 2 parts meet up and I even built an extra lip into the neck part so there shouldnt be any gaps..these are off scans of the actual cowls so...yeah it would be too late if your thinking I need to change something

On the flash v2, Is there an open space under the chin?
it may be because it's late, but I'm not quite seeing it together where the neck meets the chin.
Do you understand what I'm talking about?

I am, like the title says I am taking deposits until Friday I'll send you a PM

Hi are you still selling your flash cowls, if so I wold like to purchase one of your red two part cowls I would only need the cowl not the lighting bolts as I have made some already