nwjedidave
Sr Member
Re: 3D Printed Kit - Cosmo Dragoon - Full Print #70
interested in a finished version
interested in a finished version
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Unlimited Run Cosmo Dragoon (3D Printed Kit)
- Thread starter rgriesbeck
- Start date
Re: 3D Printed Kit - Cosmo Dragoon - Full Print #70
I have searched long and hard for pics of the case on the internet and these are all the ones I have. The line drawing that I haven't posted (because I couldn't find any on the web) is in the This is Animation Galaxy Express Memorial Collectionpp38. I'll get it scanned and post it.
I have searched long and hard for pics of the case on the internet and these are all the ones I have. The line drawing that I haven't posted (because I couldn't find any on the web) is in the This is Animation Galaxy Express Memorial Collectionpp38. I'll get it scanned and post it.
ataru72ita
Sr Member
Re: 3D Printed Kit - Cosmo Dragoon - 1st print post #65
I Totally agree with Matt 009!! But putting together all of the objects to go with the case would blow my mind away!!!!
Regards,
Alberto
Here is the Mazone detector from the original series. It slides onto the top of the dragoon from the back.
View attachment 469927View attachment 469928View attachment 469929View attachment 469930View attachment 469931View attachment 469932View attachment 469933View attachment 469934View attachment 469935View attachment 469936
I thank my friend Matt with the crazy memory for these pics. Anyway, put this bad boy with the Dragoon and the Anti-Noo bullet and you have the ultimate dragoon prop. Who knows, maybe you can do a separate run for accessories.
I Totally agree with Matt 009!! But putting together all of the objects to go with the case would blow my mind away!!!!
Regards,
Alberto
Re: 3D Printed Kit - Cosmo Dragoon - Full Print #70
Beautiful work! It's difficult to create a physical model of an animated prop when the drawing vary. Capturing the spirit of the prop is what counts. You'd definitely done that in this case. I'm in for one when you make them available.
Beautiful work! It's difficult to create a physical model of an animated prop when the drawing vary. Capturing the spirit of the prop is what counts. You'd definitely done that in this case. I'm in for one when you make them available.
Re: 3D Printed Kit - Cosmo Dragoon - Full Print #70
Thank You! My supplies should be in tomorrow, so look for these to go on sale w/in a couple days guys. I'm glad you're happy with the end result. The size is great and it's a cool looking gun. As far as the Mazone detector, it's a definite possibility for the future, just need to get a few other projects done 1st.
We did make a few small changes as suggested by Matt009 , removed the bolt heads from the right body and inserted a "hole" into the part of the body in front of the cylinder.
Thank You! My supplies should be in tomorrow, so look for these to go on sale w/in a couple days guys. I'm glad you're happy with the end result. The size is great and it's a cool looking gun. As far as the Mazone detector, it's a definite possibility for the future, just need to get a few other projects done 1st.
We did make a few small changes as suggested by Matt009 , removed the bolt heads from the right body and inserted a "hole" into the part of the body in front of the cylinder.
Last edited by a moderator:
Re: 3D Printed Kit - Cosmo Dragoon - Full Print #70
Now for sale, check out the 1st post!!
Now for sale, check out the 1st post!!
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
Probably not, but there are people out there that do finishing work. My issue is: 1) not enough time in the day and 2) I'm in Canada, sending painted, assembled guns across borders often causes issues...
And it's really easy to finish and paint one of these, assembly can be done in 5-10 minutes, and painting wouldn't be tough either. Just depending on how smooth you'd like it, the sanding will be the job that might take an hour or two...
Probably not, but there are people out there that do finishing work. My issue is: 1) not enough time in the day and 2) I'm in Canada, sending painted, assembled guns across borders often causes issues...
And it's really easy to finish and paint one of these, assembly can be done in 5-10 minutes, and painting wouldn't be tough either. Just depending on how smooth you'd like it, the sanding will be the job that might take an hour or two...
FlyingDachshund
Active Member
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
Payment sent!
Mark in Okinawa
Payment sent!
Mark in Okinawa
Re: 3D Printed Kit - Cosmo Dragoon - Full Print #70
To illustrate backof's point just look at the Mazon detector. Each shot has variances. The Dragoon is even more so. Just look at the pic above. In it are the Grace Modeling, Studio Treasure Island, Tanaka Thunder Workshop, Mandrake, and Taito versions. The are all very good (except for maybe the Taito) and I am sure the people crating the models cared a great deal about "getting it right".
To illustrate backof's point just look at the Mazon detector. Each shot has variances. The Dragoon is even more so. Just look at the pic above. In it are the Grace Modeling, Studio Treasure Island, Tanaka Thunder Workshop, Mandrake, and Taito versions. The are all very good (except for maybe the Taito) and I am sure the people crating the models cared a great deal about "getting it right".
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
Thanks to those 4 who've paid, I'll get a list up soon. Been away from a computer most of the day, but the printers are running, I think I've got 2 done already!
Anyone else want one, lemme know cause I'll be switching my attention to BB-8 pretty soon
Thanks to those 4 who've paid, I'll get a list up soon. Been away from a computer most of the day, but the printers are running, I think I've got 2 done already!
Anyone else want one, lemme know cause I'll be switching my attention to BB-8 pretty soon
darkev2
Well-Known Member
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
Hello rgriesbeck
I want one but I have to finalize a few bills first!!! I should be able to send in the payment by next Wednesday if that is okay!!!
Smiles
DarKev2
Hello rgriesbeck
I want one but I have to finalize a few bills first!!! I should be able to send in the payment by next Wednesday if that is okay!!!
Smiles
DarKev2
Last edited:
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
Payment sent.
Payment sent.
Last edited:
![icon_sr[1].jpg](https://therpf-f28a.kxcdn.com/forums/data/attachments/211/211570-7d8d562de0e2990ddda154dd83d0af75.jpg "icon_sr[1].jpg")
![img_2[1] (2).jpg](https://therpf-f28a.kxcdn.com/forums/data/attachments/211/211571-41b4fe9d71936589de38544a5f7efc05.jpg "img_2[1] (2).jpg")
![img_3[1] (3).jpg](https://therpf-f28a.kxcdn.com/forums/data/attachments/211/211572-16194725fe8c9f4a6dff5e53d9d4bf4d.jpg "img_3[1] (3).jpg")
![img_4[3].jpg](https://therpf-f28a.kxcdn.com/forums/data/attachments/211/211573-acd3f30bf47ac29fbadffba43c47831c.jpg "img_4[3].jpg")
![img_4[1].jpg](https://therpf-f28a.kxcdn.com/forums/data/attachments/211/211574-d8a8e9d138fd0ed4fb62ba08aca6b648.jpg "img_4[1].jpg")
![doragoon[1].jpg](https://therpf-f28a.kxcdn.com/forums/data/attachments/211/211575-a95f83a0d04c2ceedf37c4c834a710f6.jpg "doragoon[1].jpg")
FlyingDachshund
Active Member
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
I like that one as well... I wonder how the blued steel effect was done. Do you have more pictures of that one?
Mark in Okinawa
I like that one as well... I wonder how the blued steel effect was done. Do you have more pictures of that one?
Mark in Okinawa
ataru72ita
Sr Member
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
Hey rgriesbeck, probably You missed my pm, anyway, payment sent!:thumbsup
Kind regards,
Alberto
- - - Updated - - -
So You possess all of the above or are just pictures of collections around??
Regards,
Alberto
Hey rgriesbeck, probably You missed my pm, anyway, payment sent!:thumbsup
Kind regards,
Alberto
- - - Updated - - -
So You possess all of the above or are just pictures of collections around??
Regards,
Alberto
Last edited by a moderator:
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
Here's the list, as of now:
If I've missed anyone, let me know. Work continues!
Here's the list, as of now:
FlyingDachshund
|
If I've missed anyone, let me know. Work continues!
Last edited by a moderator:
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
I especially like the finish on this one, looks like a real nickel plated gun.
What would be the best finish for the harlock comodragoon for you?
I have seen a glazed grey one you pictured before, but I would think about a bluish black finish to look like a real treatment on steel.
Then, what finish before painting, sandblasted, sandpapered, polished, if based from a real old gun, would be a chemical treatment after rough polishing with a 220 to 400 grit rotating felt, with bluish dark hue on treatment.
I especially like the finish on this one, looks like a real nickel plated gun.
What would be the best finish for the harlock comodragoon for you?
I have seen a glazed grey one you pictured before, but I would think about a bluish black finish to look like a real treatment on steel.
Then, what finish before painting, sandblasted, sandpapered, polished, if based from a real old gun, would be a chemical treatment after rough polishing with a 220 to 400 grit rotating felt, with bluish dark hue on treatment.
Re: 3D Printed Kit - Cosmo Dragoon - Now Selling!
So You possess all of the above or are just pictures of collections around??
Regards,
Alberto[/QUOTE]
Man, I wish I owed all these versions. But no, I have just done a ton of research on the dragoon and every time I have found a different site with different makes of the gun or paint jobs I will note the site (most times) and copy the pics for my dragoon file.
So You possess all of the above or are just pictures of collections around??
Regards,
Alberto[/QUOTE]
Man, I wish I owed all these versions. But no, I have just done a ton of research on the dragoon and every time I have found a different site with different makes of the gun or paint jobs I will note the site (most times) and copy the pics for my dragoon file.
