ConvergenceProps Blaster Works: UPDATE: ESB Boba Blaster

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


BobaFettSlave_1

Sr Member
Got some more work done on this heap this weekend ..
(IG-88’s Blaster)
8A976E95-3CB2-4D80-81D1-895C5B534D9F.jpeg

8.) Got the barrel permanently mounted onto the Mp44/STG44 casting, and blended in with filler.
06B1328A-20D3-47E1-901B-31BA59D1BAA1.jpeg 3AF64FDC-058D-4F54-9E05-68E38ED8CCF3.jpeg
9.) Got some more “greeblies” added on Just missing the stock bits and the under magazine port details which I still gotta design
2F70B325-933C-43BB-9E27-FED938BDBB10.jpeg 7221040A-E794-46A0-8C2F-2AE65CF4DC78.jpeg
10.)Started working on the scope assembly. Figured I could at least get the piece that mounts to the sight tower installed. Its a vintage scope mount on there as well. The singlepoint scope is just a casting. Didn’t see the sense in spending the mula on a real one for this POS when the scope lens gets covered up anyway and Ive no real desire to build the other STG based blasters
F1BF82FE-6E42-4A5F-83C4-92F48E308B2C.jpeg D3690A75-CE00-4481-918D-3AF15BDCBE01.jpeg
So close yet still so much to do...
 
Last edited:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

BobaFettSlave_1

Sr Member
Upgrades to my Boba ESB EE-3 Foundparts build.
1.) Added Romans gorgeous new MPP replica and swapped out my Parks tube.
2.) Finally finished V4 of my new ConvergenceProps: Repositionable Breech Disks kits (These ones are Type . Super happy with how these came out after all the work that went into them.
I might still pick up one of Fieldmarshalls stocks eventually to replace my India made replica, but idk yet. Pretty happy with it atm though.
Obligatory broken off molex photo from flipping it around taking photos (Carbonite Freezing chamber and “Put Captain Solo into the Cargo Hold” config)

Parts list:
Found Parts:
Real 1917 webley
4x AM aerial split plugs
2x vintage Unimax switch
4x Molex connectors
1977 V8 rods
A.S.I 4x20 scope

Replica Parts:
Leather Sling - Designed and made by me
Scope mounts and brackets- Designed and made by me
Breech Disks - Designed and made by me
Flash tube - Roman Props MPP Replica
DSC_1413.JPG
 

Attachments

  • DSC_1415.JPG
    DSC_1415.JPG
    9.2 MB · Views: 13
  • DSC_1417.JPG
    DSC_1417.JPG
    8.5 MB · Views: 13
  • DSC_1432.JPG
    DSC_1432.JPG
    11.7 MB · Views: 13
  • DSC_1421.JPG
    DSC_1421.JPG
    3.8 MB · Views: 12
  • DSC_1422.JPG
    DSC_1422.JPG
    8.3 MB · Views: 9
  • DSC_1423.JPG
    DSC_1423.JPG
    2.2 MB · Views: 10
  • DSC_1424.JPG
    DSC_1424.JPG
    3.5 MB · Views: 8
  • DSC_1427.JPG
    DSC_1427.JPG
    2.4 MB · Views: 8
  • DSC_1430.JPG
    DSC_1430.JPG
    9.5 MB · Views: 9
  • DSC_1431.JPG
    DSC_1431.JPG
    8.5 MB · Views: 9
  • DSC_1436.JPG
    DSC_1436.JPG
    2 MB · Views: 13
  • B208BEB4-AC83-4010-8003-587000AE7139.jpeg
    B208BEB4-AC83-4010-8003-587000AE7139.jpeg
    2.4 MB · Views: 7
Last edited:

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top