Crazy Hunter
New Member
Here is my Idea from a special Glaive.
Long are the Glaive 2,10 mtr.Looks like so.The Grip looks other a new concept.It is a surprice.
Only the Blade is 70 cm long.The Grip 70 cm.The Blade are on two sides.The Material from the Grip is an Alutube/pipe.The Blade is MDF/Wood
and Aluminiumplate
and many Special Thinks.I post the next Picture later from my Work.
Here is the Stencil. I hope my English it,s okay
Step 1 make Stencil
Step 2: MDF 16 mm MDF template on transfer
3.With jigsaw cut
4.With the serrated edge of the nail file nail files
Further steps will follow later
With a pencil mark off the center of the wavy edge
and filing it with the coarse file
Compare with the template again
Next step: To make the blade look older is allowed to the silver color
somewhat dry and then grind it with sand paper over it.
The scratches or contours are drawn with a thin Edding slightly.
Sprayed with clear lacquer finish to protect
If there is intrested I build for you a Glaive.
Selection of the color of the handle and blade, I leave you.
The cost would be only the material for my work I charge nothing.
Because it amuses me to make a different friend.
The 290.- US Dollar would cost - or 200.-Euro + freight.
Material would be
Aluminum and MDF and accessories:
Length of the Glaive from 2,10 mtr to 2.40 mtr depending on the size of the person / Predator
Glaive can be divided into 3 parts to cutting: 2xKlinge and 1x grip
The Glaive But you can also use a form for poured latex.
The choice of grip color would be:
-Silver with black decorations
Bronze with gold or silver ornaments
Black with Gold or Silver Sun (like mine)
The blade color would be:
Full-Hammerhead
(Hammerhead and silver like mine)
Full-Silver
For this purpose the Facehugger skewered with green blood
or without
Skulls and small predator trailer with leather and small balls
Until then, why wait until I've finished mine.
The cutting edge, I again sprayed with silver, so that the sharpness
better be lifted out.
Here, too, with a brush / short bristles with some black scratches of tracing
The skulls with a cord tied together and of course painted.
be prepared to handle this then fixed to the end
As you can see in the movies lasert the Predator.
This lack of even the Glaive, a Gravur.Onlyhow?
To buy spray solution, a special share in gold, silver, or black.
So that the blade looks like something intressant.
Long are the Glaive 2,10 mtr.Looks like so.The Grip looks other a new concept.It is a surprice.
Only the Blade is 70 cm long.The Grip 70 cm.The Blade are on two sides.The Material from the Grip is an Alutube/pipe.The Blade is MDF/Wood
and Aluminiumplate
and many Special Thinks.I post the next Picture later from my Work.
Here is the Stencil. I hope my English it,s okay
Step 1 make Stencil
Step 2: MDF 16 mm MDF template on transfer
3.With jigsaw cut
4.With the serrated edge of the nail file nail files
Further steps will follow later
With a pencil mark off the center of the wavy edge
and filing it with the coarse file
Compare with the template again
Next step: To make the blade look older is allowed to the silver color
somewhat dry and then grind it with sand paper over it.
The scratches or contours are drawn with a thin Edding slightly.
Sprayed with clear lacquer finish to protect
If there is intrested I build for you a Glaive.
Selection of the color of the handle and blade, I leave you.
The cost would be only the material for my work I charge nothing.
Because it amuses me to make a different friend.
The 290.- US Dollar would cost - or 200.-Euro + freight.
Material would be
Aluminum and MDF and accessories:
Length of the Glaive from 2,10 mtr to 2.40 mtr depending on the size of the person / Predator
Glaive can be divided into 3 parts to cutting: 2xKlinge and 1x grip
The Glaive But you can also use a form for poured latex.
The choice of grip color would be:
-Silver with black decorations
Bronze with gold or silver ornaments
Black with Gold or Silver Sun (like mine)
The blade color would be:
Full-Hammerhead
(Hammerhead and silver like mine)
Full-Silver
For this purpose the Facehugger skewered with green blood
or without
Skulls and small predator trailer with leather and small balls
Until then, why wait until I've finished mine.
The cutting edge, I again sprayed with silver, so that the sharpness
better be lifted out.
Here, too, with a brush / short bristles with some black scratches of tracing
The skulls with a cord tied together and of course painted.
be prepared to handle this then fixed to the end
As you can see in the movies lasert the Predator.
This lack of even the Glaive, a Gravur.Onlyhow?
To buy spray solution, a special share in gold, silver, or black.
So that the blade looks like something intressant.
Last edited by a moderator: