Concept for a special Predator Glaive

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Crazy Hunter

New Member
Here is my Idea from a special Glaive.

Long are the Glaive 2,10 mtr.Looks like so.The Grip looks other a new concept.It is a surprice.

Only the Blade is 70 cm long.The Grip 70 cm.The Blade are on two sides.The Material from the Grip is an Alutube/pipe.The Blade is MDF/Wood

and Aluminiumplate

and many Special Thinks.I post the next Picture later from my Work.

Here is the Stencil. I hope my English it,s okay :p ;)

Step 1 make Stencil
Step 2: MDF 16 mm MDF template on transfer
3.With jigsaw cut
4.With the serrated edge of the nail file nail files

Further steps will follow later

With a pencil mark off the center of the wavy edge
and filing it with the coarse file

Compare with the template again
Next step: To make the blade look older is allowed to the silver color
somewhat dry and then grind it with sand paper over it.
The scratches or contours are drawn with a thin Edding slightly.
Sprayed with clear lacquer finish to protect

If there is intrested I build for you a Glaive.
Selection of the color of the handle and blade, I leave you.
The cost would be only the material for my work I charge nothing.
Because it amuses me to make a different friend.
The 290.- US Dollar would cost - or 200.-Euro + freight.

Material would be

Aluminum and MDF and accessories:
Length of the Glaive from 2,10 mtr to 2.40 mtr depending on the size of the person / Predator
Glaive can be divided into 3 parts to cutting: 2xKlinge and 1x grip

The Glaive But you can also use a form for poured latex.

The choice of grip color would be:

-Silver with black decorations
Bronze with gold or silver ornaments
Black with Gold or Silver Sun (like mine)

The blade color would be:

Full-Hammerhead
(Hammerhead and silver like mine)
Full-Silver

For this purpose the Facehugger skewered with green blood
or without
Skulls and small predator trailer with leather and small balls

Until then, why wait until I've finished mine.

The cutting edge, I again sprayed with silver, so that the sharpness
better be lifted out.
Here, too, with a brush / short bristles with some black scratches of tracing
The skulls with a cord tied together and of course painted.
be prepared to handle this then fixed to the end

As you can see in the movies lasert the Predator.
This lack of even the Glaive, a Gravur.Onlyhow?

To buy spray solution, a special share in gold, silver, or black.
So that the blade looks like something intressant.
 
Last edited by a moderator:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

MasterAnubis

New Member
I think that your sharpened blade area would look good silver and the rest of it hammered. That would give the blade a hammered yet sharpened look. The colors you have look awesome together.

Basically the area you have white should be silver:

I see you flipped the glaive over before the paint dried. Metallic’s take longer to dry, even longer if you lay it on thick. Be patient.
 
Last edited by a moderator:

Brandon1

New Member
now that looks perfect!
maybe take a bit of black and do some dry dabbing along the hammered part of the blade to give it some depth.

i would never have the patience to sit there and sand those down
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Elder1

New Member
Hallo,
cooles Teil, bin schon gespannt auf den weiteren Verlauf.

Grüße aus Deutschland!

Gruß
Michael
 

Crazy Hunter

New Member
Thanks Brain and struulingrunt
Wait until tomorrow, then it's done, I then .. well
Oh yeah I forgot
 
Last edited by a moderator:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Crazy Hunter

New Member
Picture Glaive is ready

The Glaive is finished it you want to see.
I'm 1.98 mtr tall, the Glaive 2,40 mtr :D :D

Most of the work was the sisal rope about 8 Meter had and wrapped with hot glue
gun werden.Das aluminum was glued darker eingefärbt.Die skulls
and were glued to the blades so that you can divide the Glaive into 3 parts.
Necklaces befestigt.In the grooves were glued in and gold paint was
pocketed and finally with the special silver spray paint finish.
The Glaive has a weight of 1.5 kg and is 2,40 mtr high.
For me it is too big but just for the brain (Wolf Predator) or Elder One true.
I will build for me again one.
Work 1 weeks.
 
Last edited by a moderator:

predator666

New Member
Awesome work Chris. :D The glaive is very unique and you done an amazing job on it. Yes size wise it would suit me but it's not part of wolf's arsenal
 

Crazy Hunter

New Member
My new Glaive for me is a bit smaller than the first.
Since this is unfortunately gone
 
Last edited by a moderator:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top