The Valeyard
Member
Re: Blade Runner Gun (3D Printed Kit)
Will you be doing the Officer K blaster at any point?
Will you be doing the Officer K blaster at any point?
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Unlimited Run Blade Runner - Deckard's Blaster (Version 3)
- Thread starter rgriesbeck
- Start date
-
- Tags
- blade runner
Re: Blade Runner Gun (3D Printed Kit)
Absolutely, I start printing the 1st prototype tomorrow
Absolutely, I start printing the 1st prototype tomorrow
DarklyDreaming
Active Member
Re: Blade Runner Gun (3D Printed Kit)
do you have one available with the amber grips?
do you have one available with the amber grips?
Re: Blade Runner Gun (3D Printed Kit)
I have a set of grips and can get one printed for you over the weekend
I have a set of grips and can get one printed for you over the weekend
Re: Blade Runner Gun (3D Printed Kit)
Sorry, I don't. Aside from having no time, it's tough to send an assembled gun through the mail. Check out the assembly video in the 1st post, you may find it fun...
Sorry, I don't. Aside from having no time, it's tough to send an assembled gun through the mail. Check out the assembly video in the 1st post, you may find it fun...
FolkyPatrol
Well-Known Member
Re: Blade Runner Gun (3D Printed Kit)
If you're using Firefox Ou Chrome, there is a fix to Photobucket just google "photobucket embed fix"
If you're using Firefox Ou Chrome, there is a fix to Photobucket
just google "photobucket embed fix"
DumbledorePool
New Member
Re: Blade Runner Gun (3D Printed Kit)
Hey, new to prop kits so apologize if my question might sound stupid but is the 3D Printed Kit - Blade Runner - $100 (plus accessories) the Deckard gun from your first post with all the pictures? See that theres a screw kit and led kit as well. If I wanted could I get those later? Really love blade runner and want to get both the new and old blasters. See that you are working on the new one and will be on the look out
Hey, new to prop kits so apologize if my question might sound stupid but is the 3D Printed Kit - Blade Runner - $100 (plus accessories) the Deckard gun from your first post with all the pictures? See that theres a screw kit and led kit as well. If I wanted could I get those later? Really love blade runner and want to get both the new and old blasters. See that you are working on the new one and will be on the look out
Last edited by a moderator:
Re: Blade Runner Gun (3D Printed Kit)
Yes, that's this gun, the Deckard gun. You can always get the screws and leds separately, but it will cost more to send them separately in the mail...
Thanks
PS - should have Officer K's blaster ready very soon
Hey, new to prop kits so apologize if my question might sound stupid but is the 3D Printed Kit - Blade Runner - $100 (plus accessories) the Deckard gun from your first post with all the pictures? See that theres a screw kit and led kit as well. If I wanted could I get those later? Really love blade runner and want to get both the new and old blasters. See that you are working on the new one and will be on the look out
Yes, that's this gun, the Deckard gun. You can always get the screws and leds separately, but it will cost more to send them separately in the mail...
Thanks
PS - should have Officer K's blaster ready very soon
Last edited by a moderator:
DumbledorePool
New Member
Re: Blade Runner Gun (3D Printed Kit)
Are screws printed too and could i get some at homedepot?
Re: Blade Runner Gun (3D Printed Kit)
The screws are real hex head screws, about a dozen, all different sizes. You cut the threads off and glue them into the gun. You could look all around for the right ones, of you could spend $7.50, up to you
The screws are real hex head screws, about a dozen, all different sizes. You cut the threads off and glue them into the gun. You could look all around for the right ones, of you could spend $7.50, up to you
David3
Sr Member
Re: Blade Runner Gun (3D Printed Kit)
Hi Rob,
Just received my order from you here in Australia.
Great kit but a tad small in scale.
Just what I was after though with working cylinder and bolt handle.
The markings on the receiver are nice and crisp looking too.
Not one for the novice though. As to be expected with a 3d print there's a lot of sanding and finishing to be done to get it to look the part but nothing too difficult.
All the pieces are really solid and there doesn't seem to be any fragile bits at all.
Can't wait to get started on this.
Thanks
Hi Rob,
Just received my order from you here in Australia.
Great kit but a tad small in scale.
Just what I was after though with working cylinder and bolt handle.
The markings on the receiver are nice and crisp looking too.
Not one for the novice though. As to be expected with a 3d print there's a lot of sanding and finishing to be done to get it to look the part but nothing too difficult.
All the pieces are really solid and there doesn't seem to be any fragile bits at all.
Can't wait to get started on this.
Thanks
Last edited:
TickTockMan
Active Member
Re: Blade Runner Gun (3D Printed Kit)
Form completed, money sent—I’m ordering one with all the bells and whistles!
Form completed, money sent—I’m ordering one with all the bells and whistles!
TickTockMan
Active Member
Re: Blade Runner Gun (3D Printed Kit)
Awesome! What’s the ETA? (No hurries, just want to get a feel for the timeframe...)
Awesome! What’s the ETA? (No hurries, just want to get a feel for the timeframe...)
Re: Blade Runner Gun (3D Printed Kit)
Sold 4 today, your #3, plus the new Blade runner gun, should be able to ship in a week
Sold 4 today, your #3, plus the new Blade runner gun, should be able to ship in a week
Re: Blade Runner Gun (3D Printed Kit)
Thanks for the orders everyone. 1st 2 kits done, will ship out tomorrow. Working on all orders in the order they came in. Will email you when order ships.
Thanks for the orders everyone. 1st 2 kits done, will ship out tomorrow. Working on all orders in the order they came in. Will email you when order ships.
Last edited:
Re: Blade Runner Gun (3D Printed Kit)
Weekend bump
Weekend bump
Last edited:
