Blade Runner 2049 Sapper Morton's Colonial Medical Use Bag

Djblingbling1

Sr Member
Been a bit since ive checked in on this but here's my thoughts,

Company never got back to me via email in regards to the different logos on the holders, so im worried about ordering them and getting the "wrong" ones. The holders are less than the tubes, so it would be cheap if I and 2 others went in on them without the tubes. If I have a holder in hand I can either 3D model them, or lend some out for casting so that everyone can get one. As far as the tube I think it would be easy to find small poly tube and print a label out, again once we have the holders we can really work the size and scale.
 

Djblingbling1

Sr Member
From looking just now I think the screen used logo is a discontinued holder...of course. I can try and model it from screen shots, but I just dont know how good 3D printed will look, unless someone prints in ABS and an give it a nice acetone fume wash to smooth it out.
 

MAJSmith

Sr Member
Any more discoveries on the patch? I’m going to use a dark gray medical cross patch. It’s hard to tell if there’s one there or not.
 

Djblingbling1

Sr Member
Any more discoveries on the patch? I’m going to use a dark gray medical cross patch. It’s hard to tell if there’s one there or not.

Im convinced the patch is nothing off shelf...ive looked pretty globally at that size patch and turning up nothing, so its got to be something maybe printed on vinyl and slapped with some velcro.
 

Djblingbling1

Sr Member
It should, The patch on screen is slightly smaller than a 2x1 which is a normal blood type size, which is another point for it just being a custom thing they made.
 

Djblingbling1

Sr Member
Render_Final.jpg

Also totally down to spitball ideas for the patch, and come up with something custom as a group.
 

podman

Active Member
These are the best grabs i could get from my digital version of BR2049 of the patches on the pouch. There are 2 patches or plates but its not clear what they have on them. It's possible someone with the ability to grab the 4K frames might have a clearer image.

The best shots of the patches are when Sapper reaches for the worms from the top of his kitchen units and then when he is ramming K into the wall.

Snap_2018.03.09 08.40.42_034.png Snap_2018.03.09 08.46.12_035.png Snap_2018.03.09 08.40.14_033.png
 

podman

Active Member
I dont really feel my printer puts out a quality I would feel comfortable charging for, but id be more than happy to share the file for those that have access to a printer.

You could put it on shapeways then at least you get some payment for the work you put into modelling it.
 

Mike J.

Master Member
RPF PREMIUM MEMBER
Grabbed some poor 1080p caps (lightened):
 

Attachments

  • Screen Shot 2018-03-10 at 8.39.18 AM.png
    Screen Shot 2018-03-10 at 8.39.18 AM.png
    59.4 KB · Views: 421
  • Screen Shot 2018-03-10 at 8.39.10 AM.png
    Screen Shot 2018-03-10 at 8.39.10 AM.png
    53.6 KB · Views: 419
  • vlcsnap-2018-03-10-08h28m36s011.png
    vlcsnap-2018-03-10-08h28m36s011.png
    287.7 KB · Views: 151
  • vlcsnap-2018-03-10-08h28m40s824.png
    vlcsnap-2018-03-10-08h28m40s824.png
    252.6 KB · Views: 141
  • vlcsnap-2018-03-10-08h28m46s596.png
    vlcsnap-2018-03-10-08h28m46s596.png
    260.4 KB · Views: 148
  • vlcsnap-2018-03-10-08h28m52s863.png
    vlcsnap-2018-03-10-08h28m52s863.png
    147.6 KB · Views: 149
  • vlcsnap-2018-03-10-08h31m01s503.png
    vlcsnap-2018-03-10-08h31m01s503.png
    998.7 KB · Views: 164

MAJSmith

Sr Member
I think that’s the best we’re going to get. I’ll check the extra features on the DVD for maybe some behind the scenes footage. There might be something there.
 

repy

Well-Known Member
3 points IMO :
- Left split ring looks smaller than the right one.
- upper patch could be a name tag?
- "Lower thing" could be some sort of metal clip : the original pouch could have been modified by adding a webbing strap?
 

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top