lol, did you check their forum?
http://www.thecustomsabershop.com/forum/viewtopic.php?t=1068
If you use that kit you can use any 1" blade. You have to sand the heck out of the stock one to reuse it.
Anyone still making working lightsabers?
- Thread starter Spirit of ob1
- Start date
lol, did you check their forum?
http://www.thecustomsabershop.com/forum/viewtopic.php?t=1068
If you use that kit you can use any 1" blade. You have to sand the heck out of the stock one to reuse it.
KidL
Well-Known Member
Perfect! Thanks for the link! :thumbsup
I just recently found the site and totally glossed over the forum/help section... whoops!
Ti-el_terall
Active Member
You can use stock Maul blades if you sand them down. I recomend using Tims 1 blades.
And heres the tutorial http://www.thecustomsabershop.com/forum/viewtopic.php?t=1068
Im still really into LED sabers, Im working on a Graflex, Yoda Fx, Vader ESB and a few others.
TheDisturbance
Well-Known Member
It might be a www.sithplanet.com saber:
On another "bad" note:
If illbeats/kit fisto's thread is still up I can't seem to find it. As far as I know it was deleted as a collective consensus from the moderators.
Hyperdyne's been a long standing member. He's helped out RPF members countless times. Here's a thread that's most recent.
Helping a fellow RPF member with an annoying neighbor:
http://www.therpf.com/showthread.php?t=26754&highlight=transmitter
In contrast here's a thread where you "help out.":
http://www.therpf.com/showthread.php?t=13405&highlight=render
Laughing at SurferGeek's suggestion of the use of Sketup as a 3D redering tool.
Your final reply is classic:
http://www.therpf.com/showpost.php?p=192755&postcount=14
xwingband said:
I find it ironic you claim to be more helpful than Hyperdyne on the RPF yet you don't find the RPF all that fun. You seem to suggest you have more than one reason why the RPF is not fun. You imply you're helping people left and right on the RPF and thus this gives your statements and character more validity?
Suggesting that Hyperdyne doesn't help out or adds nothing helpful to the RPF is not true. It is a perfect example of your blantant spin and false propaganda for your own personal gratification and gain.
Mark Cheng
Last edited:
I have seen that EL saber which is why in my posts I say the first LUXEON sidious. Sithplanet is the member Korbanth here I believe. He doesn't actually make the sabers as far as I know. He was certainly not the seller I saw some ebay ones under.
As of what you say Mark... you can't speak your own spin straight (first to call foul is usually commiting the most ehh???). The OP ends up using the free version of Sketch-up to which I give the link to! If that's not help... WHAT IS?!?!
You ALSO are going on my ignore list. There is a reason you've been banned from a fair amount of forums. You seem to follow me waiting to insight "disturbances", who else would bring up a thread months old!
Here's another classic comment to you: Just because your turd has been in the punch longer doesn't make the smell any sweeter.
As of what you say Mark... you can't speak your own spin straight (first to call foul is usually commiting the most ehh???). The OP ends up using the free version of Sketch-up to which I give the link to! If that's not help... WHAT IS?!?!
You ALSO are going on my ignore list. There is a reason you've been banned from a fair amount of forums. You seem to follow me waiting to insight "disturbances", who else would bring up a thread months old!
Here's another classic comment to you: Just because your turd has been in the punch longer doesn't make the smell any sweeter.
TheDisturbance
Well-Known Member
Oh I'm terribly sorry. My mistake. :confused Where exactly do you state your Sidious is "the first LUXEON sidious"??? Why does it bother you that I mention it might be a SithPlanet Sidious??? :confused It was never an issue or a concern of mine to who made the first bladed Sidious. I was just trying to be helpful. It seemed like you were having trouble figuring out who possibly made your Sidious hilt. Since you do state bellow that you have no clue who made it. Maybe there's no point in me helping you figure it out. You'll just find a way to spin and twist everything to make it appear negative.
:confused
I guess you're right I can't speak my own spin straight. :wacko I wonder what the above crap just proves.
Again your reply above is spin. Your initial reply was communicating to Cayman Shen that Sketchup shouldn't be considered as a possible tool for 3D blueprints. Real helpful to put a link to Sketchup, yet previously downplay Sketchups potential use.
http://www.therpf.com/showpost.php?p=192306&postcount=5
You posted a link to Setchup after the fact of being served some "crow" for tyring to school everybody on how "useless" Sketchup is for 3D saber blueprints. :lol Helping someone find Sketchup with a link yet telling them not to use it is a totally awesome. :thumbsup Your word for today is "negate" or "negation". I'm not going to define it for you. For you can Google them just like you can Google Sketchup. Which happens to be owned by Google.
Sweet!!! Hopefully we'll get in less of these idiotic discussions. Which I'm completely done with. I'm sure everyone else is too.
Last edited:
Ti-el_terall
Active Member
Yes, I think that a discussion about some of the upcomming tech for LED sabers would be great. Has anyone heard about the Luxeon Rebels?
Lan-Ed-Tul
Well-Known Member
man, i cant go to any board, without Mark aggravating xwing over stupid stuff.
hyperdyne
Sr Member
It's not stupid, Mark is just calling a spade a spade. Xwing can backpeddle all he wants, but his asinine comments demonstrate his unstable character.
Not to mention how xwingband states that he has contributed more to the RPF than I - that is rich. :confused I have been a good-standing member of the RPF since its inception. I cant even count the number of threads I have contributed to. So shut your pie hole, xwing. IMO you are a newb and part of this generation "me" culture that twists reality around your laughable perception.
At any rate, as long as you have been unearthed as the troll you are - the RPF will be better off. Please do ignore me so I dont have to continue these idiotic exchanges with you.
To keep this on topic, here is a pic of some hyperblades if you were interested in them at all:
Cue the other members of the FSM to jump in now.... :lol
Not to mention how xwingband states that he has contributed more to the RPF than I - that is rich. :confused I have been a good-standing member of the RPF since its inception. I cant even count the number of threads I have contributed to. So shut your pie hole, xwing. IMO you are a newb and part of this generation "me" culture that twists reality around your laughable perception.
At any rate, as long as you have been unearthed as the troll you are - the RPF will be better off. Please do ignore me so I dont have to continue these idiotic exchanges with you.
To keep this on topic, here is a pic of some hyperblades if you were interested in them at all:
Cue the other members of the FSM to jump in now.... :lol
acerocket
Well-Known Member
Hyperdyne's blade are some of the brightest I've seen. But you do pay a price for their power. Luxeon powered blades are nice from a budget standpoint, but you are limited by only having a single LED in your hilt. Really, it is all a matter of personal taste, and how much green you want to part ways with. If you want the brightest blade, I would see Hyperdyne. If you want a bright blade, but don't want to break the bank, then check out The Custom Saber Shop (You can buy everything you need to make a complete saber from TCSS including batteries, electronics, hilt components, and LED). There are also people out there who do commission work and will do whatever a customer wants. Depending on the design, you can spend quite a chunk of change getting a custom job. Of course, you can always do it yourself as either style blade can be utilized by the DIY crowd.
I have a few green Rebels I am playing with right now. They are very small. Nearly impossible to use for our purposes without them being attached to a PCB. Power wise they are definitely more battery friendly than the Luxeon III (and just as bright if not more so in some cases).
Those are (5) Luxeon Rebels pre-mounted to a 10mm x 10mm PCB. As you can see, they are quite small even from Honest Abe's viewpoint. I have some small 14.9mm hex optics for these LEDs but have not yet gotten the base that fits the Luxeon Rebel.
I have a few green Rebels I am playing with right now. They are very small. Nearly impossible to use for our purposes without them being attached to a PCB. Power wise they are definitely more battery friendly than the Luxeon III (and just as bright if not more so in some cases).
Those are (5) Luxeon Rebels pre-mounted to a 10mm x 10mm PCB. As you can see, they are quite small even from Honest Abe's viewpoint. I have some small 14.9mm hex optics for these LEDs but have not yet gotten the base that fits the Luxeon Rebel.
Darth Lars
Master Member
I think it would be interesting to see if a handful of tiny Rebels could be mounted on a custom PCB in an array and fit in a lightsaber.
That would be quite bright, indeed, but the cooling could be difficult. Didn't the TriLux ("only" three luxeons) require a fan?
That would be quite bright, indeed, but the cooling could be difficult. Didn't the TriLux ("only" three luxeons) require a fan?
Similar threads
