russellsch
Master Member
Oh yeah baby!!! 
I look forward to seeing some beautiful photos!
I look forward to seeing some beautiful photos!
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Interest ALL METAL CNC Aluminum/Steel EE-3 BOBA FETT BLASTER PROP PROJECT
- Thread starter Portumac
- Start date
russellsch
Master Member
Very nice!
Vader2015
Active Member
Check pm
Just curious, but did anyone receive their "in good will" Pulse 40?
I want to start this update post by sending my best wishes to everybody and hoping you and your families are doing well in these difficult times we are going through right now. I will have (5) EE-3 ESB Blasters ready by the end of next week, and in the next couple of weeks I will have the remaining ESB and then after that the ROTJ version will follow. I haven't stopped to put pressure to my local machine shop, and like I was telling another member I couldn't cancel the run with them since they already started it and was to late even that they were behind on the project. Several member canceled their spots and I refunded their money. This money came out of my own pocked NOT THE MACHINE SHOP, since all the money I collected I gave it to the shop. I just saw some comments from members, that are in my personal opinion the only meaning and interest is show negativity to the members that sign for the run or for other members that had or have intentions to take spots. I also found the comment above from HighlanderFX (James Macgregor) no proper since he asked me for a refund for his deposit that he paid on July 2019 and he asked for his refund on November 2019 and gave it to him. When I announced that I was going to give away the Pulce 40 Pistols he sent me his address and soon later he canceled his spot in the run and since he told me he was canceling there was no need or reson in his own words for me to send him a Pulce 40 pistol, obviously. I guess now his intention is to find out from you guys if I am a reliable person or a liar. In the Post I made where I offer the Pulce 40 pistos KITS for free, yes I did it as a good will to compensate you guys for the delay and I said that the people who signed and paid their deposits could PM me if they wanted to receive their Pulce 40 pistols. As a request from one member he asked me to send his Pulce 40 Pistol when I ship his EE-3 Blaster so I didn't have to pay more money on shipping. If is very important for you guys to post the names of the member that I already mailed their Pulce 40 Blasters I can do it, no problem. All I can say is that I apologize for the delay and I wish I could have finished this run last year, but unfortunately I was at the mercy of this shop. The owner believe it or not is very sorry and feels bad for the inconvenience. I also have received requests for the complete scope mount set for the ESB Blaster version. We are making 15 sets and they being machined now. Here are some pictures of the (5) Blasters will be ready by the end of next week, I wrote on a piece of paper today's date just in case someone say that those are old pictures. Thank you for your attention and stay safe.
Sincerely,
Manny Romero
Sincerely,
Manny Romero
Attachments
russellsch
Master Member
I've said it before, & I'll say it again... I'm with you to the end my friend.
The reason I left this run was because delays occurred, for one reason or another. That’s not my thing I’m afraid, and I never go passed the Paypal safety date without the goods in hand.
I have never done business with Portumac before, and my question regarding the Pulse 40s is to figure out if he does what he promises.
There is nothing wrong with asking that question, and I would certainly consider jumping back in to fill my spot again if this rights itself.
Portumac: Based on the defensiveness of your response, my guess is the damage is done and you have found nothing but ill intent in my question. Please let me know if this is not the case.
I have never done business with Portumac before, and my question regarding the Pulse 40s is to figure out if he does what he promises.
There is nothing wrong with asking that question, and I would certainly consider jumping back in to fill my spot again if this rights itself.
Portumac: Based on the defensiveness of your response, my guess is the damage is done and you have found nothing but ill intent in my question. Please let me know if this is not the case.
Good evening, here are some new pictures I took this afternoon. A total of 5 ESB Blasters will be ready next week. I will invoice each of the first 5 people who joined the run. The remaining ESB will be ready the next couple of weeks and the ROTJ version right after that. The scopes are in hand, I have them at home, I will take pictures of the assembled Blasters before I pack them. I want to point out that the aluminum parts will be clean and brushed so no marks will be on it. Thank you all for your patient and once again I apologize for the delay and inconveniences.
Attachments
I truly appreciate your "good will" intentions to be worry and concerned about for the rest of the fans that are still part in the run. You didn't have to be that obvious to question my credibility the way you did it. I am not going to let this or any other comment of this nature affect my willingness and motivation to finish what I started and I promised. I know this is business and there is money involved and I agree with you on that. I will turn the page on this, and I hope your curiosity has been satisfied.
russellsch
Master Member
Man oh man, those look so good!
Looking forward to getting my invoice
Looking forward to getting my invoice
Good evening. Here are more pictures, were taking today. Five (5) EE-3 ESB Blasters will be ready tomorrow and I will pack them over the weekend to ship them early next week. The next batch of ESB Blasters will be ready in the next couple of weeks or before, and the ROTJ right after that. Thank you again for your patience.
Attachments
Hi Markus, yes, because I received several request from fans that owns the REAL Webley & Scott MK1 and my local machine shop will be machining 20 sets of the ESB EE-3 Scope Mounts. They will be ready in approximately two business weeks. Right now we have all the parts to complete all the Blaters run. If more people would like to place an order too please private message me so I can add you guys to the list.
The first 5 EE-3 ESB Blasters are done, I will be cleaning up each of them this weekend. The first 5 people from the run list will be receive the first batch and the second batch will be ready by the end of next week. I have sent messages to the first five members, only two have responded. If I don't hear from the other three by this Sunday I will invoice the next three people in the list. If there is any cancellations I will let you guys know. I know there are a few people interested so you guys make take their spot. I will also take pictures with the scopes on. People will receive their Blasters pre-assembled. I will have two Blasters painted, Cerakote to show how the finished painted prop will look. Cerakote is the best option for these, I don't recommend to have the parts powder coated, the grip, hammer, trigger guard and trigger are made of spincast Pewter, they low temperature metal and they will melt at high temperatures. I will post pictures once I have one Blaster painted. Once again thank you for your time and patience.
Attachments
russellsch
Master Member
OOOOO, I'm so excited!!!
Those look damn sexy!
Those look damn sexy!
Similar threads
