Airbrush Moisture Trap Purchase...confused O.o

[JoeSomebody369]

Hey folks,

So I just got my moisture trap in the mail today trying to get everything together and paint this mask before halloween but I'm at a loss to how this is suppose to work. Here is the paasche MT moisture trap I received today...

http://shop.hobbylobby.com/store/item.aspx?ItemId=175406

This is the airbrush I have

http://shop.hobbylobby.com/products/airbrush-set/

Now the instructions say to cut the airhose as close to the airbrush as possible and but the hose over the barbed nipples and tighten onto the moisture trap however the nuts they provided are to big to screw onto the trap as you can see in the link to the MT trap there is no other parts but the 2 nuts and the trap.

Am I misunderstanding something or do I need to purchase another piece to allow me to put this thing together/

 

[JoeSomebody369]

Nevermind I figured it out. Was just nervous about cutting the airhose. Couldnt find a delete post button but if anyone could remove this post that would be great.

Thanks.

 

[Effects Guy]

Gotta say, that is the most ridiculous moisture trap design ever. Not your fault obviously. But, in the future, be wary of things that ask you to damage something you already have. There are plenty of screw on moisture traps. Also, that screw water release is goofy. Most of them have a little pin you push in and it releases the water out the bottom while connected to the hose. I am not trying to talk down to anyone, so please understand.