-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Limited Run 2nd Run "RUN CLOSED"
- Thread starter Spirit of ob1
- Start date
dorn cresh
New Member
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
Looks like the link he posted has a sketch of the 2-bolt static option. Check out the first post here: http://www.therpf.com/showthread.php?t=257800
Hope that helps!
Looks like the link he posted has a sketch of the 2-bolt static option. Check out the first post here: http://www.therpf.com/showthread.php?t=257800
Hope that helps!
Last edited by a moderator:
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
Hey Rudy
Any chance you can get 8/32 threaded holes drilled on the clamp spacer for the transistors? Might have to widen the post on the spacer to accommodate that. Make it a little easier for install. I tried to get the spacer piece off but I can't even get it to budge to mod it myself. I don't want to force it and chance breaking it :confused
Hey Rudy
Any chance you can get 8/32 threaded holes drilled on the clamp spacer for the transistors? Might have to widen the post on the spacer to accommodate that. Make it a little easier for install. I tried to get the spacer piece off but I can't even get it to budge to mod it myself. I don't want to force it and chance breaking it :confused
Markgarcia10
Active Member
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
Bump bump
Bump bump
Spirit of ob1
Master Member
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
Yea the spacers are really tight, use a Dowell and pop it off that's how I remove them, The reason why I didn't thread the resistors to the spacer was to try to give everyone the option on how they wanted to display their chambers because if I threaded them it their would only be one way to display them, im still trying to come up with a way of new transisters but I think I will have to prob offer a new spacer with the threading option.
Yea the spacers are really tight, use a Dowell and pop it off that's how I remove them, The reason why I didn't thread the resistors to the spacer was to try to give everyone the option on how they wanted to display their chambers because if I threaded them it their would only be one way to display them, im still trying to come up with a way of new transisters but I think I will have to prob offer a new spacer with the threading option.
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
I'm in for this run!
I'm in for this run!
Pixelpiper
Well-Known Member
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
You can add me Rudy. I'll offer another vote for threaded holes in the internal rails to attach the transistors if you can make that happen.
You can add me Rudy. I'll offer another vote for threaded holes in the internal rails to attach the transistors if you can make that happen.
Last edited:
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
I also vote yes on the threaded holes for the transistors
Sent from my iPhone using Tapatalk
I also vote yes on the threaded holes for the transistors
Sent from my iPhone using Tapatalk
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
so, quick question. although i have a few static hilts, i am new to putting electronics in. i will use the Roman FX hilt with this crystal chamber and will also get the switch kit with the chamber if possible. what else will i need to make this light up like the video in the first post? is there another run i should be buying from as well? thanks!
so, quick question. although i have a few static hilts, i am new to putting electronics in. i will use the Roman FX hilt with this crystal chamber and will also get the switch kit with the chamber if possible. what else will i need to make this light up like the video in the first post? is there another run i should be buying from as well? thanks!
put me down as definitely interested as well. i'm also in the switch kit if that can be done here too.
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
I would check out this thread (link below) that has some wiring diagrams and some other options. Mars made his spring loaded and said its really easy to add. For the lights you will need a battery, a recharge port (if desired or you can take the battery out to charge), a speaker, some 28 gauge (i think) wire, a switch and some LED's. Or if you want just a light with no sound, you can use a swicth, battery, LED's and some resistors. (or buy LED's with resistors already in them).
http://www.therpf.com/showthread.php?t=257800&p=3931839#post3931839
I would check out this thread (link below) that has some wiring diagrams and some other options. Mars made his spring loaded and said its really easy to add. For the lights you will need a battery, a recharge port (if desired or you can take the battery out to charge), a speaker, some 28 gauge (i think) wire, a switch and some LED's. Or if you want just a light with no sound, you can use a swicth, battery, LED's and some resistors. (or buy LED's with resistors already in them).
http://www.therpf.com/showthread.php?t=257800&p=3931839#post3931839
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
this is fantastic - thanks!!! i may just go with the light, so if i can get the switch kit here with the crystal chamber build, all i really need then are the LEDs (w/ resistors) and the battery. simple enough.
this is fantastic - thanks!!! i may just go with the light, so if i can get the switch kit here with the crystal chamber build, all i really need then are the LEDs (w/ resistors) and the battery. simple enough.
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
It works with any of the versions but personally I am going with the Chrome/ Oxide. Originally I had a weathered, but when this chamber became available for a 2nd run I switched for an AFBB version. I think it will look amazing with any version. The second one will go in either a machine or weather since its a gift for someone and why not save a few bucks. (Im buying the 2nd one for my bro in law) Which version are you going with?
It works with any of the versions but personally I am going with the Chrome/ Oxide. Originally I had a weathered, but when this chamber became available for a 2nd run I switched for an AFBB version. I think it will look amazing with any version. The second one will go in either a machine or weather since its a gift for someone and why not save a few bucks. (Im buying the 2nd one for my bro in law) Which version are you going with?
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
If you make the spacer part not as tight and movable just by loosening the set screw then we can rotate that part to where we want it positioned. Right now the clamp kind of just dangles when it is is loosened. With threaded holes securing the clamp to the spacer it wont move. I would tap and thread the spacer myself but I still can't get it off the chamber part...
If you make the spacer part not as tight and movable just by loosening the set screw then we can rotate that part to where we want it positioned. Right now the clamp kind of just dangles when it is is loosened. With threaded holes securing the clamp to the spacer it wont move. I would tap and thread the spacer myself but I still can't get it off the chamber part...
Re: 2nd Run Obi ANH Crystal chamber ( Interest Thread )
After receiving some help and the right tools, I kept playing around with it and finally got it off. We would need to file/sand down the bottom notches inside the clamp in order for the holes to line up with the post and only the bottom transistor would be able to screw in.
After receiving some help and the right tools, I kept playing around with it and finally got it off. We would need to file/sand down the bottom notches inside the clamp in order for the holes to line up with the post and only the bottom transistor would be able to screw in.
Similar threads
