Re: ANH Hero DL-44 Discussion
OK, i´m back from shopping.
Gents, some pics for your kind acknowledgement. :lol
The first cut is the deepest - after that it hurts no more. :cool
Some cuts later - it´s level:
Unchucking it from the mill, and chucking it in the lathe. A first cut with 1° taper:
(Ignore the hits left of the taper, they are later hide in the adapter for the flashhider)
After some more cuts and some lapping, the first test fit - "Clarence, we have clearance"
:
The underside:
Some random pics from different angles:
And with mounted scope:
The good news:
Were comming closer.
The bad news:
It is not possible to offer a simple one part "bullbarrel with adapter for flashhider" that can be permanent added to the receiver,
and keep it ready to dissassembly. Only for Denix, as it´s upper receiver lifts up.
MGC and Mauser needs to have a 2-part system, 1 bullbarrel + 1 adapter for the flashhider - the adapter has to be disassembled when the upper receiver shall be slide off the lower.
I forget to make the related pics, will post them later this night.