Ein
Sr Member
DOWNLOADS SECTION
I'm updating the OP to organize some of the 3d models I have made throughout the thread. I'm making all of these files available on principle, for all those hundreds of times I have seen someone working on something on TheRPF who isn't willing to share. I figured I should put my money where my mouth is, and hope that it encourages future posters and makers to share their own works more freely.
IMMORTAN JOE BADGES / MEDALS
These badges have been recreated from the stills and reference images I have been able to grab from the movie. They may not be 100% accurate on details or scaling, but they are as close as I am damn well able to get them for screen accuracy purposes, and I've done a lot of work to try and make them look the part.
And the top bars for the ones that need them!
'EAGLE' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'KEYHOLE' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'GRINDER' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS EXTRA: 'GRINDER' MEDAL TOP BAR DOWNLOAD: .STL
'500' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS EXTRA: '500' MEDAL TOP BAR DOWNLOAD: .STL
'SCROLL' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS EXTRA: '500' MEDAL TOP BAR / WINGNUT DOWNLOAD: .STL
IMMORTAN CODPIECE COMPONENTS
I made up a quick collection of the parts that can be found on Joe's castle nut codpiece, pictured below. You can print as many of the codpiece nuts as you want - I have no idea how many of each type are necessary, off the top of my head - but my personal preference is probably to print one of each, make a quick mold, and then pop out resin copies. Printing an entire plate of these things would take a lot of time and put a lot of unnecessary wear on a printer otherwise!
CODPIECE COMPONENT COLLECTION DOWNLOAD: .RAR COLLECTION
All of the parts in the image above are archived in that .rar collection. By request I have provided separate links to Shapeways for the individual parts so that people can order parts they might need or are missing.
'240' BADGE / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'929' BADGE / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'49' BADGE / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
IMMORTAN SHIN EMBLEM COMPONENTS
I know that Hamsterstyle generously provided a couple models for these purposes, but there were a few that I saw missing, and at this point I just decided I wanted to be a completionist and model all of the things I was going to wear myself. I can't guarantee these will be exactly the right scale, so be prepared to have to play with the sizing a bit!
'HYPOID' GEAR / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'STRAIGHT' GEAR / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'SINK STOPPER' / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'500' SHIN BADGE / EMBLEM: .STL | PRINT AT SHAPEWAYS
'1100' SHIN BADGE / EMBLEM: .STL | PRINT AT SHAPEWAYS
'GX' SHIN BADGE / EMBLEM: .STL | PRINT AT SHAPEWAYS
'XL' SHIN BADGE / EMBLEM: .STL | PRINT AT SHAPEWAYS
IMMORTAN AIR FILTRATION COMPONENTS
I eyeballed this stuff as best I could to get something that would be a reasonable substitute for the car / motorcycle air filters that Joe has attached over each shoulder mostly because it seemed like tracking down a screen-accurate filter was difficult, if not impossible. The sizes on these things seems to be all over the place. This one's about 50mm at its widest, which I think is close to the screen dimensions based on what I can scale it against. I made a 'hollowed out' version to put on Shapeways in the hopes that it would be a little cheaper to print, but unfortunately it is still fairly pricey.
AIR FILTER SOLID SINGLE PIECE: .STL | PRINT AT SHAPEWAYS
Alternatively, if you guys decide to lose your minds like I do and want working, non-solid air filters, you can opt for Dust Devil H3 filters, which are roughly the right size and profile. Of course, they're too long by a substantial amount, so they need cutting down, which leads to the next part...
For guidance on how to use these end caps, this post might be helpful. If your printer can actually manage the text on the hex cap, more power to you!
AIR FILTER BASE END PIECE: .STL
AIR FILTER HEX CAP WITH TEXT: .STL
This model was created to solve a very specific problem. The screen-accurate gas mask hose that connects from the air bladder behind his head to his mask is actually a combination of two different types of hose. The light grey hose is from a PDF-D childrens' gas mask and is more flexible, which was probably done on purpose to make it easier for the actor to move his head about. The black hose is the more standard type of russian gas mask hose you frequently find on the Soviet GP-5 or M41M masks. These hoses, stock, actually screwed together without any problem when I bought them, but the connection point on them was way too big like that. Instead, what I opted to do was design this piece to replace the connectors entirely. Slide the grey hose up over the smaller diameter end, and the black hose over the sleeve on the larger diameter end, and ta-da!
GAS MASK HOSE CONNECTOR: .STL | PRINT AT SHAPEWAYS
This was designed to interface between the back end of my air filter and the airbag itself. It has a straight shot through the bigger tube to allow the most air through with the widest diameter opening. It is specifically measured to fit the dimensions of the piping I'm using. For looks it should work just fine, but use at your own caution if you're trying to build an airtight seal like I am.
AIR FILTER T-PIPE: .STL PART 1 | .STL PART 2
This is designed to replicate the fitting between the back of Joe's hoses and is the plug that reaches into the air bladder from the outside. It has a smooth curve on the inside of the pipe to channel the airflow properly, if you're trying to make it actually work like I am. The longer section should be long enough to reach through whatever bracketing you use to attach it to the armor. It was sectioned into two pieces to make printing it a little easier. Again, this part is specifically measured to fit the dimensions of the piping I'm using, but it'll also work just fine as an aesthetic piece.
AIR FILTER L-PIPE: .STL PART 1 | .STL PART 2
IMMORTAN JOE'S WAR CLUB
These parts are dumb to 3d print, but maybe someone will find them useful as I did. They were designed to fit over 3/4" PVC pipe with some sanding. The club head is divided into two parts to fit on my print bed.
WAR CLUB HEAD PARTS: .STL PART 1 | .STL PART 2
WAR CLUB BASE ENDCAP: .STL PART 1
IMMORTAN JOE'S CHROME SPRAY HOLDER
This is an enclosure designed to fit around a Wilton's Silver Color Mist Food Spray. It tastes bitter, but it's at least safe for human consumption, and it's right about the right size. The bottle of Wilton spray is actually supposed to show for a small section between the top of the base part and the cap, but peel the plastic label off first so it's just a plain white.
CHROME SPRAY HOLDER PARTS: .STL PART 1 | .STL PART 2
I'm updating the OP to organize some of the 3d models I have made throughout the thread. I'm making all of these files available on principle, for all those hundreds of times I have seen someone working on something on TheRPF who isn't willing to share. I figured I should put my money where my mouth is, and hope that it encourages future posters and makers to share their own works more freely.
IMMORTAN JOE BADGES / MEDALS
These badges have been recreated from the stills and reference images I have been able to grab from the movie. They may not be 100% accurate on details or scaling, but they are as close as I am damn well able to get them for screen accuracy purposes, and I've done a lot of work to try and make them look the part.
And the top bars for the ones that need them!
'EAGLE' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'KEYHOLE' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'GRINDER' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS EXTRA: 'GRINDER' MEDAL TOP BAR DOWNLOAD: .STL
'500' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS EXTRA: '500' MEDAL TOP BAR DOWNLOAD: .STL
'SCROLL' MEDAL DOWNLOAD: .STL | PRINT AT SHAPEWAYS EXTRA: '500' MEDAL TOP BAR / WINGNUT DOWNLOAD: .STL
IMMORTAN CODPIECE COMPONENTS
I made up a quick collection of the parts that can be found on Joe's castle nut codpiece, pictured below. You can print as many of the codpiece nuts as you want - I have no idea how many of each type are necessary, off the top of my head - but my personal preference is probably to print one of each, make a quick mold, and then pop out resin copies. Printing an entire plate of these things would take a lot of time and put a lot of unnecessary wear on a printer otherwise!
CODPIECE COMPONENT COLLECTION DOWNLOAD: .RAR COLLECTION
All of the parts in the image above are archived in that .rar collection. By request I have provided separate links to Shapeways for the individual parts so that people can order parts they might need or are missing.
'240' BADGE / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'929' BADGE / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'49' BADGE / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
IMMORTAN SHIN EMBLEM COMPONENTS
I know that Hamsterstyle generously provided a couple models for these purposes, but there were a few that I saw missing, and at this point I just decided I wanted to be a completionist and model all of the things I was going to wear myself. I can't guarantee these will be exactly the right scale, so be prepared to have to play with the sizing a bit!
'HYPOID' GEAR / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'STRAIGHT' GEAR / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'SINK STOPPER' / EMBLEM DOWNLOAD: .STL | PRINT AT SHAPEWAYS
'500' SHIN BADGE / EMBLEM: .STL | PRINT AT SHAPEWAYS
'1100' SHIN BADGE / EMBLEM: .STL | PRINT AT SHAPEWAYS
'GX' SHIN BADGE / EMBLEM: .STL | PRINT AT SHAPEWAYS
'XL' SHIN BADGE / EMBLEM: .STL | PRINT AT SHAPEWAYS
IMMORTAN AIR FILTRATION COMPONENTS
I eyeballed this stuff as best I could to get something that would be a reasonable substitute for the car / motorcycle air filters that Joe has attached over each shoulder mostly because it seemed like tracking down a screen-accurate filter was difficult, if not impossible. The sizes on these things seems to be all over the place. This one's about 50mm at its widest, which I think is close to the screen dimensions based on what I can scale it against. I made a 'hollowed out' version to put on Shapeways in the hopes that it would be a little cheaper to print, but unfortunately it is still fairly pricey.
AIR FILTER SOLID SINGLE PIECE: .STL | PRINT AT SHAPEWAYS
Alternatively, if you guys decide to lose your minds like I do and want working, non-solid air filters, you can opt for Dust Devil H3 filters, which are roughly the right size and profile. Of course, they're too long by a substantial amount, so they need cutting down, which leads to the next part...
For guidance on how to use these end caps, this post might be helpful. If your printer can actually manage the text on the hex cap, more power to you!
AIR FILTER BASE END PIECE: .STL
AIR FILTER HEX CAP WITH TEXT: .STL
This model was created to solve a very specific problem. The screen-accurate gas mask hose that connects from the air bladder behind his head to his mask is actually a combination of two different types of hose. The light grey hose is from a PDF-D childrens' gas mask and is more flexible, which was probably done on purpose to make it easier for the actor to move his head about. The black hose is the more standard type of russian gas mask hose you frequently find on the Soviet GP-5 or M41M masks. These hoses, stock, actually screwed together without any problem when I bought them, but the connection point on them was way too big like that. Instead, what I opted to do was design this piece to replace the connectors entirely. Slide the grey hose up over the smaller diameter end, and the black hose over the sleeve on the larger diameter end, and ta-da!
GAS MASK HOSE CONNECTOR: .STL | PRINT AT SHAPEWAYS
This was designed to interface between the back end of my air filter and the airbag itself. It has a straight shot through the bigger tube to allow the most air through with the widest diameter opening. It is specifically measured to fit the dimensions of the piping I'm using. For looks it should work just fine, but use at your own caution if you're trying to build an airtight seal like I am.
AIR FILTER T-PIPE: .STL PART 1 | .STL PART 2
This is designed to replicate the fitting between the back of Joe's hoses and is the plug that reaches into the air bladder from the outside. It has a smooth curve on the inside of the pipe to channel the airflow properly, if you're trying to make it actually work like I am. The longer section should be long enough to reach through whatever bracketing you use to attach it to the armor. It was sectioned into two pieces to make printing it a little easier. Again, this part is specifically measured to fit the dimensions of the piping I'm using, but it'll also work just fine as an aesthetic piece.
AIR FILTER L-PIPE: .STL PART 1 | .STL PART 2
IMMORTAN JOE'S WAR CLUB
These parts are dumb to 3d print, but maybe someone will find them useful as I did. They were designed to fit over 3/4" PVC pipe with some sanding. The club head is divided into two parts to fit on my print bed.
WAR CLUB HEAD PARTS: .STL PART 1 | .STL PART 2
WAR CLUB BASE ENDCAP: .STL PART 1
IMMORTAN JOE'S CHROME SPRAY HOLDER
This is an enclosure designed to fit around a Wilton's Silver Color Mist Food Spray. It tastes bitter, but it's at least safe for human consumption, and it's right about the right size. The bottle of Wilton spray is actually supposed to show for a small section between the top of the base part and the cap, but peel the plastic label off first so it's just a plain white.
CHROME SPRAY HOLDER PARTS: .STL PART 1 | .STL PART 2
Last edited by a moderator: