Thanks guys! When it came to the painting I used a couple of the recommended metalized rattle cans, rather than an airbrush, so I ended up with layers of paint in order to get an evenish base colour . After that had hardened I painted the entire head with black acrylic ,getting it deep into the holes, let that dry, then scoured it off. I then dry brushed a 50/50 mix of silver and steel grey, let that dry then buffed it with various rags. A quick wipe of Burnt Umber in places and it was finished.
The added holes came from sitting infront of TESB with a pencil and just roughing in a few areas of detail, given the thousands Chris has already put in to it was just a couple of hours work. A bit of apoxy sculpt around the nose to repair cutting damage and to roughen the eye surfaces and that was it. Because the weather here has been terrible I couldn't use airbrushes so the effects were "rougher" and less even ,which works in its favour.
Zorgs sculpts and casting are some of the cleanest I've ever seen.The dimensions and surfaces on his EV torture droid which I'm trying to paint now are close to absolute perfection as is possible.
I'll add hoses and bits like the rest of the guys here have done in the New Year.May be by then Chris will have seen another few new droids he might like to build- regards Cut.