Try rotating the loops and, if you have them, add additional caps. Add a cross bar between the "legs" and it would look like a breaker handle. Looking good!
I love looking at things and thinking "greeblie!"
In the hall, we see the seldom-seen Falcon bathroom door, three tanks of hyperdrive fluid, and a naughty chair for Threepio...
http://i778.photobucket.com/albums/...n Build 01108/20160917_112606_zpsjrzzk2gv.jpg
This is really looking amazing! Great job!
In the hall, we see the seldom-seen Falcon bathroom door, three tanks of hyperdrive fluid, and a naughty chair for Threepio...
http://i778.photobucket.com/albums/...n Build 01108/20160917_112606_zpsjrzzk2gv.jpg
Sofa, that greeblie looks like a grasshopper on...grassThe middle part is great, but those side "things" are a bit off (my two cents, of course). Besides that, looking good and thanks to the Laser cutter (finally).
Oh man, this is going to be cool! I'm subscribing to this so I can follow along. Can't wait to see how it turns out!
Hi Gang,
Not much of a weekend update. Spent most of yesterday cleaning the workshop and getting ourselves more organized. Also, the rain, as usual, decides to make an appearance on the weekend making it tough to use the power tools... The laser cutting seems to be holding steady so that's a good thing and I was able to knock a few things out.
Finally updated and cut this greeblie
http://i778.photobucket.com/albums/...n Build 01108/20160917_061307_zps9vx8deuu.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_061652_zpsmhe3my2o.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_061656_zpssvkho3gp.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_061745_zpskk5wk9gk.jpg
Uh oh!
http://i778.photobucket.com/albums/...n Build 01108/20160917_061756_zpsgdaknbed.jpg
Primed
http://i778.photobucket.com/albums/...n Build 01108/20160917_112557_zpsh2esbido.jpg
Painted black and awaiting the traditional silver
http://i778.photobucket.com/albums/...n Build 01108/20160917_123044_zpsdoocd5zk.jpg
Those standoffs I mentioned last week
http://i778.photobucket.com/albums/...n Build 01108/20160917_061842_zps82bqhilf.jpg
These look much better than the pile of nuts I put in place. Just need to paint silver
http://i778.photobucket.com/albums/...n Build 01108/20160917_062319_zpsjkcrwuaz.jpg
One of my fav panels!
http://i778.photobucket.com/albums/...n Build 01108/20160917_062532_zpsbyvgjm9h.jpg
I then routed the edges of the door pads to allow for a more graceful curve - practice piece
http://i778.photobucket.com/albums/...n Build 01108/20160917_083102_zpskfj0wyhc.jpg
Before
http://i778.photobucket.com/albums/...n Build 01108/20160917_112606_zpsjrzzk2gv.jpg
The router didn't remove as much material as I would have liked in most areas
http://i778.photobucket.com/albums/...n Build 01108/20160917_112618_zpszvvjhvko.jpg
Nice rounded edge
http://i778.photobucket.com/albums/...n Build 01108/20160917_112624_zpskt7smujy.jpg
I'm reworking this greeblie pack
http://i778.photobucket.com/albums/...n Build 01108/20160917_120309_zpsuzvemut7.jpg
More work on the foot well panel
http://i778.photobucket.com/albums/...n Build 01108/20160917_075741_zpssd5wymdr.jpg
After painting I think I'm going to add some pinstripes
http://i778.photobucket.com/albums/...n Build 01108/20160917_094510_zpssxeyexth.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_094524_zpslbfmqg0w.jpg
The foot well panel will have a few greeblies mounted to include this one I designed... Laser Cutter Works!
http://i778.photobucket.com/albums/...n Build 01108/20160917_070146_zpssdftivfc.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_072234_zps1xd2uqrv.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_081050_zps61sg6sqx.jpg
Getting closer to the actual shape and design
http://i778.photobucket.com/albums/...n Build 01108/20160917_081605_zpskanhn9wa.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_092750_zps7ussudum.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_092754_zpssc0czmzi.jpg
Acrylic top
http://i778.photobucket.com/albums/...n Build 01108/20160917_092758_zpsvn0lbuul.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_092832_zpsirbdc12a.jpg
When I got home I dry fit everything to see how it would look... hmmmmmmm
http://i778.photobucket.com/albums/...n Build 01108/20160917_104338_zpsp6woisz0.jpg
http://i778.photobucket.com/albums/...n Build 01108/20160917_104343_zpsarcikgpc.jpg
It looks like a big grasshopper!
http://i778.photobucket.com/albums/...n Build 01108/20160917_104352_zpsa4yntkdb.jpg
I don't think I like it... What do you guys think?
http://i778.photobucket.com/albums/...n Build 01108/20160917_104322_zpsrk6yftrl.jpg
Back to the workshop to get some real work done! And of course... it's raining.
More to Follow!![]()
Sofaking01,
Here is what it will look like if you don't have two sides and you add two posts. I also shorten the height of the center circle. Thoughts?
https://c5.staticflickr.com/9/8664/29058657716_dea615edc9_c.jpgIMG_20160819_140343 by Izzy Mel, on Flickr
https://c7.staticflickr.com/9/8540/28804640190_0016ff3d10_c.jpgIMG_20160819_133908 by Izzy Mel, on Flickr
https://c7.staticflickr.com/8/7588/28985962462_5af8eb5706_c.jpgIMG_20160819_133814 by Izzy Mel, on Flickr
Why not do it same way they make archways make a rack size and shape needed then wrap one thin strip around get then fixed in place then add next one gluing together keep repeating to you get the size needed. To get it so is angled either cut after dry or cut edge of wood to angle and size before fitting together. I know this be bit fiddly and time consuming but when done be neat finish and strong and good thing is technically you can make it as big or as small as needs so could do whole ring in one go if you want simply join multiple sections together as you go round.
STEAM is the answer you are looking for with wood. On canal boats that have 1ft square oak beams (least I think it's oak) as edge protection, I saw a programme once about one being restored and the put the beam into a steam over for a few hours, then clamped it into place and it curved around the front of the barge and stayed there with fixings etc.
That would have been my preferred choice but I don't have a steamer. That's why I used water hoping to get the "same" affect.