War machine 1st attempt
- Thread starter Don Juan
- Start date
Don Juan
Well-Known Member
Re: War machine 1st attempt...
I put resin on most of my stuff i did two batches 1st coat then second coat..second coat dried 1st coat still sticky ...so mad.......i put a heat lamp not to close..its helping but not fast...hopefully it cures....i don't want to do everything again....i guess i didn't add enough hardener....:cry....
I put resin on most of my stuff i did two batches 1st coat then second coat..second coat dried 1st coat still sticky ...so mad.......i put a heat lamp not to close..its helping but not fast...hopefully it cures....i don't want to do everything again....i guess i didn't add enough hardener....:cry....
made007
Sr Member
Re: War machine 1st attempt...
If it doesnt cure, hit em with another coat with more hardener
If it doesnt cure, hit em with another coat with more hardener
Don Juan
Well-Known Member
Re: War machine 1st attempt...
I used 1.90.....yes i will do that tomorrow.... Its in my garage now....i will hit out with a coat tomorrow..
Don Juan
Well-Known Member
War machine 1st attempt...UPDATED!!!
OK heres my Scaling i used so far for those who are intetrested.....For my shoulders 1.54
lower arm 148.7116
bicep 1.69
knuckles 1.00
fingers 1.00
neck 1.80
elbow 1.50
lower torso 1.90
for my helmet was 1.44 i will double check this one i have like three numbers for this im not 100% sure will update later.... also i added more pictures to the thread you have to go back and check if you want to
OK heres my Scaling i used so far for those who are intetrested.....For my shoulders 1.54
lower arm 148.7116
bicep 1.69
knuckles 1.00
fingers 1.00
neck 1.80
elbow 1.50
lower torso 1.90
for my helmet was 1.44 i will double check this one i have like three numbers for this im not 100% sure will update later.... also i added more pictures to the thread you have to go back and check if you want to
Zaxmon
Well-Known Member
Re: War machine 1st attempt...
The hot glue is an interesting proof of concept, but have you considered picking up some rubber cord (like the stuff used to make bead necklaces, etc) and splitting it down the middle, then attaching it to the glove. It would be flexible and have the added bonus of being symmetrical and smooth.
I had a few minutes before i had to go to my work party ..Well i glued the hand together for resin will cut it apart later..i thought of this for fingers i made small strips of hot glue..made them a little wide it was my first try next one will come out thinner..what you think?i know it doesn't look like much but with paint it will probably look better..
The hot glue is an interesting proof of concept, but have you considered picking up some rubber cord (like the stuff used to make bead necklaces, etc) and splitting it down the middle, then attaching it to the glove. It would be flexible and have the added bonus of being symmetrical and smooth.
Don Juan
Well-Known Member
Re: War machine 1st attempt...
yes i did it actually so i will see how it comes out i will let it dry..ill check it tomorrow
codriver
Member
Re: War machine 1st attempt...UPDATED!!!
Don Juan do you think dose mesuares will feat me? I'm 1,86 meters tall.
Your ansers will be some kind of reference :$
Don Juan do you think dose mesuares will feat me? I'm 1,86 meters tall.
Your ansers will be some kind of reference :$
Don Juan
Well-Known Member
Re: War machine 1st attempt...UPDATED!!!
I believe that converts to.. 6'1"... So yes...I'm 6feet 1 inch..just to let you know the bicep git like an inch big..but i did it that way to match the over all look of the armor... I do pla. On triming the inside right under my armpit...i will post the mods when i do it...so its up to you of you want to scale it down..good luck
I believe that converts to.. 6'1"... So yes...I'm 6feet 1 inch..just to let you know the bicep git like an inch big..but i did it that way to match the over all look of the armor... I do pla. On triming the inside right under my armpit...i will post the mods when i do it...so its up to you of you want to scale it down..good luck
codriver
Member
Re: War machine 1st attempt...
thanks for your help....and perfect convertion by the way
..so we have the same high?!?! ;-)
i'm doing a "mark vii avengers" but i will made an WarMachine like your's....or i hope to do one too just have to make another personal manequim of me, because de first one i did is for mark vii
thanks for your help....and perfect convertion by the way
..so we have the same high?!?! ;-)
i'm doing a "mark vii avengers" but i will made an WarMachine like your's....or i hope to do one too
just have to make another personal manequim of me, because de first one i did is for mark vii
made007
Sr Member
Re: War machine 1st attempt...UPDATED!!!
Your a giant! Lol, im 5'7" and i printed my abdomen same as chest, i hope it works
Your a giant! Lol, im 5'7" and i printed my abdomen same as chest, i hope it works
Don Juan
Well-Known Member
made007
Sr Member
Re: War machine 1st attempt...UPDATED!!!
I need to glue it to test it and compare with the chest
I need to glue it to test it and compare with the chest
Similar threads
