Limited Run Star Lord Vol 2 METAL COMMUNICATOR & Pendants

[HanSewLow]

Re: Star Lord Vol 2 Pendants in METAL

Received my pendants yesterday. I filed the center brass enough to press it in by tapping it lightly with the hammer. I will be using the Clear 2 part epoxy for security measures. I'm not sure I want to weather them. They look too nice.

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

Received my pendants yesterday. I filed the center brass enough to press it in by tapping it lightly with the hammer. I will be using the Clear 2 part epoxy for security measures. I'm not sure I want to weather them. They look too nice.

Glad they got there safe! (I don't have any control at all over shipping on these pieces.) Note: Looks like there's a little bit of support gunk where the bolts meet the body. Maybe a pin or needle can get that out if you want

 

[HanSewLow]

Re: Star Lord Vol 2 Pendants in METAL

Glad they got there safe! (I don't have any control at all over shipping on these pieces.) Note: Looks like there's a little bit of support gunk where the bolts meet the body. Maybe a pin or needle can get that out if you want

Thank you for the tip. All cleaned up.

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

Thank you for the tip. All cleaned up.

Glad to help!

 

[mikid]

Re: Star Lord Vol 2 Pendants in METAL

Working on it as fast as I can. Lots of stuff going at the moment but it's coming along!

waiting for the final piece before I order

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

waiting for the final piece before I order

Working on it as fast as I can. It's a bit more complex, being made more parts than the others and I want to get it right. Then I have to do a test order myself to make sure it turns out OK.

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

Bumpiteboo.

 

[blerner]

Re: Star Lord Vol 2 Pendants in METAL

Interested pending the lapel pin!!!! I would like to get all 3 at once!!!

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

Interested pending the lapel pin!!!! I would like to get all 3 at once!!!

Understood. The lapel communicator is still at least a couple weeks away but I'm working on it as fast as I can. (I can set up ordering earlier- technically there would not be a problem, but I'd really like to see the printed piece in-hand myself first since I'm not doing the manufacturing myself.)

 

[Soulinertia]

Re: Star Lord Vol 2 Pendants in METAL

Just wanted to throw my support behind Joe for making these incredible replicas! Here are my finished versions:

Rather than making a competing product I've decided to team up with Joe to offer a finishing service for his pendants for those interested.

Price will be about $20 more. If your interested in this service, you can sign up here: http://www.therpf.com/showthread.php?t=273843

Thanks again Joe! :thumbsup

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

Thanks again Joe! :thumbsup

Thank you for the praise!

Everyone: Soulinertia does great work on these. I saw a comparison photo between ones he had finished with his replica shirt in the background and the real ones... very nice!

I'm still working on the communicator- just a little backed up from printing a lot of helmets and element guns!

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

Up we go. The Vol 2 bluray can't get here soon enough!

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

Still offering these. Made a couple minor adjustments to the scrap pendant a while back to make it even more accurate.

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

Finally caught up on some print orders so hopefully I can get back to the communicator soon. I've barely had time to hang on the RPF, let alone 3d model these last few weeks!

 

[mikid]

Re: Star Lord Vol 2 Pendants in METAL

Sitting here waiting for you to finish so I can order all at once

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

Sitting here waiting for you to finish so I can order all at once

I'm sure several folks are. Getting to it as soon as I can... just haven't been able to devote lots of time to modeling.

 

[evoskater]

Re: Star Lord Vol 2 Pendants in METAL

any update on the lapel pin?

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

any update on the lapel pin?

It's next on my list of things to finish. Trying not to work on too many things at once because it just delays everything I was also waiting for the 4K UHD release to verify some things because I didn't want to half-ass it and test print pieces that might turn out to be inaccurate since it gets costly. As soon as I'm done with the model I'm on right now, I'll get back to the communicator pin. After that, It will be time for either Nebula's blaster or maybe another couple Guardians props I've been thinking of. My thanks everyone for being patient!

 

[evoskater]

Re: Star Lord Vol 2 Pendants in METAL

is it possible that the pin is ready for christmas?

 

[JOATRASH FX]

Re: Star Lord Vol 2 Pendants in METAL

is it possible that the pin is ready for christmas?

I will try! I want it done as fast as everyone else but have had zero time to devote to it lately. (Just started a new job.) My own GotG projects have stalled a bit too. (I did just research some new ref for it a couple days ago though.) I just want to do it properly and not rush it. So often these days, people will rush a project to be "first out" and get sales (even making exaggerated claims as to accuracy for a quick buck) and I try not to do that. (I might even pass up or cancel things when another member has a better version in the works.) Sometimes that means it'll be a long wait and that when I'm done, only a couple people (or zero) are still onboard, but I refuse to half-ass an effort for a few dollars more, 'cause that's not why I do props. : )