DARKIST b4 DAWN
Member
Hi All,
Any help would be great
Any help would be great
Last edited:
And I'll toot my own horn with-
http://www.therpf.com/f9/matrix-pulse-rifle-mods-179311/
You will need an Allen wrench, a flat blade and Phillips screwdriver, small and large or at least a medium size Phillips. Grab some sort of container to place all your screws in, there's a lot. Best bet would be some small plastic containers and label them. Keep the different ones separated and label where they go.
Check out those threads and come back if you have more questions on how to proceed.
You should utilize thesearch function. it works great!
http://www.therpf.com/f9/new-airsoft-pr-evike-137136/
I've just got the exact same PR and am looking into this myself. As far as paint goes, it depends how accurate you want it or what your personal preference is....
I'm sure you're probably already aware, but Humbrol Bess Brown was the original colour. Unfortunately, also something called Humbrol Bess Brown exists today, it's not the same colour as it used to be.
Some people paint the PR Olive Drab, as it appeared that colour on screen due to lighting. If you want to go for accuracy as far as the colour the original prop was, then the closest stock paint appears to be Aervoe Earth Brown - see stock colour comparisons here:
Humbrol Bess Brown and it
Unfortunately, being in the UK, I haven't found any online retailers that stock this type/colour and will actually ship over here.
The other route for Bess Brown would be to get it custom mixed - it looks to be a Pantone code of 405c:
![]()
That works out to be an RAL equivalent of 7010. I've also seen paint custom mixed to RAL of 7013 which also looks good.
With the RAL number, you will be able to get a paint mixer to make you a batch of custom spray paint. I'm looking into this now. I know Halfords will mix custom paint, but haven't looked into prices yet (starting from £9.99 according to their website) and I'm not sure if it will have a flat enough finish. Not sure about other readily available paint mixers in the UK.
Not bad, but not enough green in the mix for my liking.
This is it applied:
http://1.bp.blogspot.com/-D80Jn8-247E/TdY9t3BOujI/AAAAAAAAACs/whEnj2T8ZjU/s1600/IMG_0501.JPG
and
![]()
I had considered the Tamiya NATO Brown and Aervoe Brown Earth for my PR. But in the end I decided I wanted what it looked like on screen, OD. I just didn't know if I could be happy with a brownish green PR. It all comes down to what you want, what looks good to your eyes.
Another option would be to paint it OD, as the base coat, and then use the NATO Brown over it. That may "tint" it enough to get a closer color.
Hmmm.....
Thanks for the tip :thumbsupOf course the easiest answer is to do one of each color! Not the cheapest option, but....
Nice pic of the PR's, makes me want to "weather" mine. Just not sure yet about that.
Here's a tip that has been alluded to when you get your PR and strip it for painting. There are a bunch of little roll pins in the shrouds to help hold it together. It will be a pain to take it apart the first time. Just pry up carefully all the way around. Once you separate the shrouds, use a pair of pliers and remove those roll pins. You don't need them. The amount of screws used in the shrouds hold them together just fine. The old G&P used to creak like crazy, but not the SnowWolf version. It will make it a lot easier to take the gun apart in the future.
Looks good, might give mine an under coat of silver then give it a weather, I like the colour! :thumbsupI just finished painting my Snow Wolf/Matrix PR yesterday.
This is Aerove Earth Brown. It has a tint of green in it, but definitely not as much as it used to. Somewhat disappointing but I still like the way it looks.
I went with the weathered look.
![]()