Show us your rpfs (replica prop firearms)!
- Thread starter oldzey
- Start date
Robert McLain
Sr Member
This is My E-11 made from the Wise Lite Arms Sporter. I like them simple, without the hengstler counter
Best part is by just installing the firing pin, removing the dummy muzzle end and installing the barrell I can take it to the range and waste some 9mm ammo
Robert
Best part is by just installing the firing pin, removing the dummy muzzle end and installing the barrell I can take it to the range and waste some 9mm ammo
Robert
DominoDoggy
New Member
@ Robert: LOL! Awesome. Any advice on where I could pick one up too?
laserpistol76
Well-Known Member
Some of my work:
tusken gun:
Nice. Most of my recent firearm builds I have made are like this, with MDF. I like the revolver best.
yrsued
New Member
UHC airsoft S&W Model 29 and Bianchi holster:
BuzzBee shotgun (compared to the other Nerf stuff, it's pretty sad) and wood shotgun shell:
That Wheel Gun looks like a S&W 586, not a 29
They did make a Full Underlug version of the 29, but that is a L Frame, not an N Frame
Gorgot3000
Sr Member
Hey ! it's Megatron !
Weaselhammer
Sr Member
Here are some of my gun props, first is my 3 ft long replica of Optimus Primes Ion rifle, scratch built by me
View attachment 130163
Next is my Longcolt .45 from Trigun I made also from scratch
View attachment 130164
View attachment 130165
and finally a Nerf mod/repaint , I built the scope from scrap parts and made the flash suppressor myself also
View attachment 130166
View attachment 130163
Next is my Longcolt .45 from Trigun I made also from scratch
View attachment 130164
View attachment 130165
and finally a Nerf mod/repaint , I built the scope from scrap parts and made the flash suppressor myself also
View attachment 130166
TimeSpills
New Member
i came to post if anyone had a Trigun weapon, and 1 second later I see your post and it made me smile
Robert McLain
Sr Member
Here's a used one at Bud's Guns. They usually carry them new, but they seem to be out of stock.
used Century Sterling 9mm $429.00 SHIPS FREE
Robert
KramStaar
Sr Member
M1 Garand.
Regrettably there is not much that can be done (without incurring unwanted expense) to change the fact that this is a Denix model so I opted to rather create a version that was more in keeping with a 1942/43 model but still preserving some of the Denix tells - for example the absence of serial numbers, the badly resolved breach-barrel, the safety, oddly placed screws, the eject etc.
I reworked all of the metal removing the horrible 'soft' edges Denix is to renowned for, I then reblued the metal keeping a slightly worn finish. I drilled out the front sight and then took a chain to the stock and hammered dents in the wood work after which I dropped black paint into the dents before staining, ageing and varnishing the wood. The buttplate was scoured of paint and also dented and chipped and I added authentic cartouch stamps to the side of the stock (matching a June 1942-October 1943 Garand). An authentic leather sling was added as a finishing touch..
Regards
MARK
Regrettably there is not much that can be done (without incurring unwanted expense) to change the fact that this is a Denix model so I opted to rather create a version that was more in keeping with a 1942/43 model but still preserving some of the Denix tells - for example the absence of serial numbers, the badly resolved breach-barrel, the safety, oddly placed screws, the eject etc.
I reworked all of the metal removing the horrible 'soft' edges Denix is to renowned for, I then reblued the metal keeping a slightly worn finish. I drilled out the front sight and then took a chain to the stock and hammered dents in the wood work after which I dropped black paint into the dents before staining, ageing and varnishing the wood. The buttplate was scoured of paint and also dented and chipped and I added authentic cartouch stamps to the side of the stock (matching a June 1942-October 1943 Garand). An authentic leather sling was added as a finishing touch..
Regards
MARK
Gorgot3000
Sr Member
Spaceballs Calico M-100 replica made from scratch
http://www.therpf.com/f9/spaceballs-calico-m-100-replica-done-lot-163658/
http://www.therpf.com/f9/spaceballs-calico-m-100-replica-done-lot-163658/
zerog270
Active Member
Frank Castle's custom M4 with Madbull AGX grenade launcher and red dot optic sight from Punisher War Zone.View attachment 136659
Wow, there is some awesome collections here, heres a few of mine however these all fire live ammo
First off here are the 24K gold plated Face/Off guns I built
This was the actual box used in Face/Off with my guns in them along with one of the money clips and the screen used Glasses nick cage wore.
Heres my .38 super Open gun (race gun)
44 AUTOMAG:
338 LAPUA MAGNUM
Remington 700 5R in .308 we shortened the barrel 6" and added a brake.
First off here are the 24K gold plated Face/Off guns I built
This was the actual box used in Face/Off with my guns in them along with one of the money clips and the screen used Glasses nick cage wore.
Heres my .38 super Open gun (race gun)
44 AUTOMAG:
338 LAPUA MAGNUM
Remington 700 5R in .308 we shortened the barrel 6" and added a brake.
Noeland
Master Member
Caz, as someone who LOVES prop guns, 3 gun, silhouette, and Cowboy action shooting, you sir are my new hero. Thank you for sharing your epic collection. WOW. Jaw on floor. The screen used face off materials alone are amazing. Add in those twin beauties that actually fire and the LAPUA and the Automag! Jeez.
LAPUA! Love it. Just love it.
LAPUA! Love it. Just love it.
