Looking for display solution for Han ANH

Discussion in 'Star Wars Costumes and Props' started by Riskbreaker, Jan 18, 2006.

  1. Riskbreaker

    Riskbreaker Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,041
    Can anyone recommend a non-enclosed display option for a Han ANH blaster? I was thinking some type of cradle. Are any of these readily available anywhere?

    Help appreciated. Thanks.
     
  2. ob1al

    ob1al Sr Member

    Trophy Points:
    1,961
    How about this as an idea; I cut a section of steel grill and used 4 hooks to secure it to the wall. The hookes were positioned to house my ESB and ANH blasters:

    [​IMG]

    Simple and inexpensive, but it like the way it looks and I can easily take a blaster down and play with it. :)
     
  3. Prop Runner

    Prop Runner Sr Member

    Trophy Points:
    1,230
    I like it. Simple & elegant. :)

    - Gabe
     
  4. DarthMouse

    DarthMouse New Member

    Trophy Points:
    2
  5. wuher da brewer

    wuher da brewer Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,781
    Mine is a cast iron plateholder I got from Garden Ridge. I cut the curlicues off the ends of each bracket. I added a hook to the middle at the top so I could have two points anchored to a stud.

    [​IMG]
     
  6. luke moonwalker

    luke moonwalker Sr Member RPF PREMIUM MEMBER

    Trophy Points:
    1,041
    I was thinking about one of these too...

    [image]http://i20.ebayimg.com/04/i/05/49/84/25_1.JPG[/image]
    [image]http://i18.ebayimg.com/02/i/05/bb/5a/76_1.JPG[/image]

    Seems easy enough to make one, or they pop up on ebay all the time...

    Completed Auction

    -Jay
     
  7. Darth Lars

    Darth Lars Master Member RPF PREMIUM MEMBER

    Trophy Points:
    2,661
    On another board, I saw a simple acrylic stand made from a rod and a square U-bar that supported the flat underside of the mag/trigger. Simple and stylish.
     
  8. Gatekeeper

    Gatekeeper Well-Known Member RPF PREMIUM MEMBER

    Trophy Points:
    846
    Nice. Would those work with a Denix too?
     
  9. Prop Runner

    Prop Runner Sr Member

    Trophy Points:
    1,230
    Nope - you need the correct stock rail. Only a real or MGC c96 will work with that base.

    - Gabe
     
  10. Gigatron

    Gigatron Sr Member

    Trophy Points:
    2,146
    Well, this is how I dsplay mine:

    [​IMG]


    Made the display my self. A pine plank and some dowels. Printed out the pictures and overlayed them with plexi. Took a couple of hours start to finish.

    Thanks to WC for hosting.

    -Fred
     

Share This Page