Liquid latex Issues.

Studiodude

New Member
Hi.
I'm making a predator suit, aren't we all, and i've had some difficulties concerning the liquid latex i'll use for the latex mask. I read that mold builder liquid latex is bad for it and i've struggled to find anywhere that actually sells mask making liquid latex. Anyone know a way i could get some, or maybe a good place to look? ;)
 

fastburst

Active Member
@Parksung17 - I am actually Using Liquid Latex Body Paint on mine. It works very well but you have to make sure to have enough coats to get a good thickness. Also you will have to paint over it as well as it is very tacky and will stick to itself if your not careful. I the Black for my dreads to coat those and filling some foam holes from the pouring and it dries with a a black gloss which was really nice and very durable. after I painted them I was able to touch and rub together with no issues. I was very pleased with the results myself.

For My suit however I am using a combo of both Liquid Latex and Liquid Latex Body Paint Flesh Color. The Liquid Latex Body Paint can be cut down using water sot hat it is easy to spray thru an AirBrush for a nice even coat.

NOTE/WARNING: Again Liquid Latex Body Paint is VERY TACKY SO BE CAREFUL NOT TO RUB OR HAVE ANY PARTS TOUCH EACH OTHER UNTIL YOU HAVER PAINTED
Liquid Latex Body Paint Store
Gallon of Flesh Color
 
This thread is more than 11 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top