Judge Dredd 1995 Rico Badge?

[DN12742]

Write me in PM where to send the STL file.

 

[thealeks]

Write me in PM where to send the STL file.

Done!

 

[enterprise0216]

I bought one here on Etsy. However just sharing after reading all the post. I look forward to seeing your finished results folks.

https://www.etsy.com/listing/885443659/judge-dredd-95-custom-badge-mega-city-1

 

[DN12742]

I bought one here on Etsy. However just sharing after reading all the post. I look forward to seeing your finished results folks.

https://www.etsy.com/listing/885443659/judge-dredd-95-custom-badge-mega-city-1

View attachment 1915705

I hope, dear thealeks - will be able to print the file that I sent him and share the result with us.

As for me, even though I am a big fan of the 90s movies, I do not plan to print this model in resin.

I took on this project to test my modeling skills, how well I have absorbed the advice and healthy criticism I received in my other topics.

As it turns out, I still do not pay enough attention to the issue of repeating props in the area of small details. I design, simplifying some important details, which in my opinion is unacceptable.

This was my challenge to myself, to see if I can do it. I had more fun designing this model.

 

[thealeks]

I hope, dear thealeks - will be able to print the file that I sent him and share the result with us.

As for me, even though I am a big fan of the 90s movies, I do not plan to print this model in resin.

I took on this project to test my modeling skills, how well I have absorbed the advice and healthy criticism I received in my other topics.

As it turns out, I still do not pay enough attention to the issue of repeating props in the area of small details. I design, simplifying some important details, which in my opinion is unacceptable.

This was my challenge to myself, to see if I can do it. I had more fun designing this model.

I finally printed it. Its just an fdm test print, I may sand and paint it, but I really want to resin print it anyways. The model is very high poly, due to (I assume) converting an image to a 3d model. All the curves are super choppy if you really zoom in. Makes no difference in fdm printing, but I'm not sure how it would affect much higher resolution resin printing. Anyways my print came out decent. I need to dial in my printer settings. I used .2mm layer height, but something closer to .1 would probably be better

 

[DN12742]

I finally printed it. Its just an fdm test print, I may sand and paint it, but I really want to resin print it anyways. The model is very high poly, due to (I assume) converting an image to a 3d model. All the curves are super choppy if you really zoom in. Makes no difference in fdm printing, but I'm not sure how it would affect much higher resolution resin printing. Anyways my print came out decent. I need to dial in my printer settings. I used .2mm layer height, but something closer to .1 would probably be better

For FDM printing, it turned out very well!

 

[DN12742]

I finally printed it. Its just an fdm test print, I may sand and paint it, but I really want to resin print it anyways. The model is very high poly, due to (I assume) converting an image to a 3d model. All the curves are super choppy if you really zoom in. Makes no difference in fdm printing, but I'm not sure how it would affect much higher resolution resin printing. Anyways my print came out decent. I need to dial in my printer settings. I used .2mm layer height, but something closer to .1 would probably be better

As the author of the model, I am very pleased that you made it a reality!

To be honest, I have made many models, but I have never been pleased by showing my model - make it a reality!

I was so touched in my soul that you printed my model that I launched this model on my FDM (FlyingBear Rebon 3) printer!

I am showing my result:

 

[thealeks]

As the author of the model, I am very pleased that you made it a reality!

To be honest, I have made many models, but I have never been pleased by showing my model - make it a reality!

I was so touched in my soul that you printed my model that I launched this model on my FDM (FlyingBear Rebon 3) printer!

I am showing my result:

Nice! That looks great!

 

[DN12742]

Anyway, I appreciate you asking this question and I - trying to make a model for you.

I had fun making this model for you, to bring you joy!