Hi All!
We’ve finished the GOT Lannister armor and are now starting limited runs of 30 sets each. Production starts now. Slots are open and a 40% down payment (prices below) reserves you a slot. Once 30 slots are filled up, you can be added to the waitlist for the next run. Runs are continuous as long as there is interest.
Armor will be cast in our flexible fiberglass mix and will be cast in black as well. We’ve designed it to be very easy to assemble.
The advantage of our flexible fiberglass cast armor are the intricate crisp detail, durability, and flexibility. This means that the armor can fit a variety and range of sizes, while maintaining the level of detail. The armor comes ready for primer. If it fits you out the box, then you can go straight to rigging and painting.
This video showcases the material we use:
Here are pics of the raw unpainted armor set out of the box:
Here are pics of the finished armor. For reference, I am 5’9 barefoot, 43” chest, 38” waist. Again, armor is flexible and by just adjusting your rigging, can fit a wide range of average sizes. Special sizes can be made by request for an additional fee.
The armor will be available in 3 basic configurations, but different options can be added
I only sell the raw unpainted kits – finishing services are not available at this time
Pricing is as follows: (all prices exclusive of shipping)
Full Royal Armor and Helmet: 635usd
Full Grunt Armor and Helmet: 550usd
Jaime Lannister Armor: 470usd
Optional Add-ons:
Helmet: 180usd
Gauntlets: 60usd
Grunt shoulder set: 95usd
I will be needing a 40% down payment* to include you in the run and to get started on your kit.
Production lead time is about 2-3 weeks
* Your down payment is spent during the production of your kit. It is not a deposit. If, for any reason, you decide not to go through with your order, we will refund your money, but please give us some time to find another buyer to shoulder the production costs already spent.
Link to my paypal account is below: ( jimmiroquai@yahoo.com )
PayPal.Me/jimmiroquai
Please indicate in the paypal message your name / username, what you are paying for, and your full shipping address and phone number
These will be shipping from the Philippines and to make things a bit simpler, I’ll be listing shipping costs and options by region:
IMPORTANT NOTE: AS OF 10/1/17: EMS HAS RAISED THEIR PROCES ALMOST 3X BY IMPLEMENTING A HIGH VOLUMETRIC FLAT RATE. I’VE HAD TO SWITCH COURIERS TO FEDEX. SHIPPING IS STILL MUCH HIGHER THAN THE PREVIOUS RATES. HOWEVER, I’VE ONLY INCREASED SHIPPING COSTS AT A FRACTION OF THE ACTUAL COST AND WILL BE SHOULDERING MORE THAN 30% OF THE SHIPPING COSTS AT MY OWN EXPENSE.
THE GOOD NEWS IS THAT BECAUSE SHIPPING IS BASED ON VOLUMETRIC WEIGHT, THE MORE I CAN FIT IN A BOX, THE CHEAPER IT WILL BE OVERALL.
I’M DOING THIS TO BE ABLE TO CONTINUE SUPPORTING THE LIVELYHOOD OF MY FIBERGLASS GUYS.
HERE ARE THE NEW SHIPPING RATES
FAQ
This has been an awesome collaboration between Jimmiroquai Props and Onix Media Studio.
For interest and inquiries, post here, send me a PM, or (most reliably) send me a PM on FB Messenger (Jim Tripon) or shoot me an email at jimmiroquai@yahoo.com
Thanks!
Jim
We’ve finished the GOT Lannister armor and are now starting limited runs of 30 sets each. Production starts now. Slots are open and a 40% down payment (prices below) reserves you a slot. Once 30 slots are filled up, you can be added to the waitlist for the next run. Runs are continuous as long as there is interest.
Armor will be cast in our flexible fiberglass mix and will be cast in black as well. We’ve designed it to be very easy to assemble.
The advantage of our flexible fiberglass cast armor are the intricate crisp detail, durability, and flexibility. This means that the armor can fit a variety and range of sizes, while maintaining the level of detail. The armor comes ready for primer. If it fits you out the box, then you can go straight to rigging and painting.
This video showcases the material we use:
Here are pics of the raw unpainted armor set out of the box:
Here are pics of the finished armor. For reference, I am 5’9 barefoot, 43” chest, 38” waist. Again, armor is flexible and by just adjusting your rigging, can fit a wide range of average sizes. Special sizes can be made by request for an additional fee.
The armor will be available in 3 basic configurations, but different options can be added
- FULL ROYAL ARMOR : Helmet, gorget (neck armor), chest and back, lion pauldrons and shoulder lames, lion elbow guards, vambraces (arm guards), skirt armor
- Full Grunt Armor: Helmet, chest and back, grunt pauldrons and arm lames, skirt armor
- Jaime Lannister: Gorget, Chest and back, Lion pauldrons and shoulder lames, Lion elbow armor, Skirt armor
I only sell the raw unpainted kits – finishing services are not available at this time
Pricing is as follows: (all prices exclusive of shipping)
Full Royal Armor and Helmet: 635usd
Full Grunt Armor and Helmet: 550usd
Jaime Lannister Armor: 470usd
Optional Add-ons:
Helmet: 180usd
Gauntlets: 60usd
Grunt shoulder set: 95usd
I will be needing a 40% down payment* to include you in the run and to get started on your kit.
Production lead time is about 2-3 weeks
* Your down payment is spent during the production of your kit. It is not a deposit. If, for any reason, you decide not to go through with your order, we will refund your money, but please give us some time to find another buyer to shoulder the production costs already spent.
Link to my paypal account is below: ( jimmiroquai@yahoo.com )
PayPal.Me/jimmiroquai
Please indicate in the paypal message your name / username, what you are paying for, and your full shipping address and phone number
These will be shipping from the Philippines and to make things a bit simpler, I’ll be listing shipping costs and options by region:
IMPORTANT NOTE: AS OF 10/1/17: EMS HAS RAISED THEIR PROCES ALMOST 3X BY IMPLEMENTING A HIGH VOLUMETRIC FLAT RATE. I’VE HAD TO SWITCH COURIERS TO FEDEX. SHIPPING IS STILL MUCH HIGHER THAN THE PREVIOUS RATES. HOWEVER, I’VE ONLY INCREASED SHIPPING COSTS AT A FRACTION OF THE ACTUAL COST AND WILL BE SHOULDERING MORE THAN 30% OF THE SHIPPING COSTS AT MY OWN EXPENSE.
THE GOOD NEWS IS THAT BECAUSE SHIPPING IS BASED ON VOLUMETRIC WEIGHT, THE MORE I CAN FIT IN A BOX, THE CHEAPER IT WILL BE OVERALL.
I’M DOING THIS TO BE ABLE TO CONTINUE SUPPORTING THE LIVELYHOOD OF MY FIBERGLASS GUYS.
HERE ARE THE NEW SHIPPING RATES
| REGION | Helmet only | ARMOR only | Full Kit |
| SE Asia | 45usd | 60usd | 60usd |
| E Asia | 50usd | 65usd | 65usd |
| Australia & New Zealand | 80usd | 95usd | 95usd |
| Canada | 100usd | 115usd | 115usd |
| EU | 110usd | 125usd | 125usd |
| UK & Ireland | 110usd | 125usd | 125usd |
| USA | 95usd | 110usd | 110usd |
FAQ
- Will this armor fit me?
- The armor is specifically sized to the global average male. However, because of the flexible fiberglass material we use, and the fact that we’ve added a lot of allowance to the pieces the armor will fit a wider range of people.
- What is the lead time for orders?
- Casting usually takes around 1-2 weeks. The sequence of casting is determined by the sequence of payments received. A 40% down payment gets you in the run.
This has been an awesome collaboration between Jimmiroquai Props and Onix Media Studio.
For interest and inquiries, post here, send me a PM, or (most reliably) send me a PM on FB Messenger (Jim Tripon) or shoot me an email at jimmiroquai@yahoo.com
Thanks!
Jim
