Done / Completed Fallout 4: Mini Nuke Prop from 3D Printed Master ***RUN FULL***

Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

Alright, updates:

@FiresprayPilot Tracking info shows yours as delivered. Just waiting for confirmation from you that it made it undamaged. Also I will have the assembly guide ready in the next couple days. I'm taking pics and such of the first assembled one and will have those all together hopefully by Saturday. Be advised, you will want to check out the assembly guide before assembling the parts, as the tolerances for the smaller ring are rather tight, and I can explain how I'm adjusting them.

@kwalsh000 Just waiting to hear back from you about the shipping charges. Your box is ready to go whenever your ready. :thumbsup

@Harrison4257 Your assembled and clean nuke should be ready tomorrow. Just finished fitting the last parts/screws. Just need to do a last minute spot check, then tomorrow I'll prime and start the final assembly with epoxy. I'll send payment info tomorrow evening, and can have it out in the mail Saturday morning. I'll post up some pics here once it's assembled completely.

@EmmaInCandyland I have the parts for your assembled kit all casted up. I have another double order for some raw kits ahead of yours, and once I get that taken care of I can begin cleaning up the parts for yours and begin assembly. I wanna say realistically a couple weeks, but rest assured I'll work as hard as I can to speed things up.

@Dalroi I'll be casting the last parts for your assembled kit tomorrow. It will be a 2-3 weeks until it's ready, as I have a few orders ahead of yours. But I'll give you a heads up once I start cleaning up the parts and keep you in the loop. :thumbsup





Anyhow, pics of the first assembled one tomorrow. Stay tuned. :)
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

Hey there... Yes, I received my mini-nuke kit. Thank you so much! I just needed to find some time to write a proper review. First thing that I noticed was how clean the cast was. There is very little to no need for prep work. The size of the football itself is perfect. I've seen others that are smaller scaled, however this one is very well proportioned to the game's version. The football comes in two hollow parts which fit together perfectly. The cast is thick, and has a very good weight to it. All of the hardware was included, and holes were pre-drilled for assembly. Overall, I'm very happy with this kit. GhostMinion's service and communication was great! If you've been following this thread, and have been on the fence about picking a mini nuke up, don't be. Can't beat the quality, service, and price. I can't wait to get started on this fat boy. I'll wait to check out the assembly guide brother...Thanks again!
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

Thank you! There's no rush with mine as I will probably be able to pay for it in mid May/ June anyway, so that should be fine, just shoot me a pm when it is ready to go :D
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

As promised, pics of the first assembled mini nuke prop. Ready for paint. :thumbsup





shell%201_zpshq5tnuds.jpg
[/URL][/IMG]

shell%204_zpsk3v9tnlx.jpg
[/URL][/IMG]

shell%205_zpsdos9fdg5.jpg
[/URL][/IMG]

shell%203_zpstalakfmh.jpg
[/URL][/IMG]






Please post here if you'd like to get in on the run. Still got a few spots left. :)
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

You have any raw kits ?

Sent from my LGMS631 using Tapatalk
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

I received my Mini Nuke, I have to say the quality is top notch.
I have one piece chip in shipment but it was easily repaired. The rest of the kit is very solid.


vmxKpXr.jpg
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

lunacyfx said:
You have any raw kits ?

Sent from my LGMS631 using Tapatalk
Click to expand...

Yes sir. Lemme know what you need.


zapwizard said:
I received my Mini Nuke, I have to say the quality is top notch.
I have one piece chip in shipment but it was easily repaired. The rest of the kit is very solid.


View attachment 622507
Click to expand...


Glad you like them! Replacement part will be on it's way first thing Monday morning. I got you covered. :thumbsup
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

I would love a kit

Sent from my LGMS631 using Tapatalk
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

Ok let me know and ill pay as soon as its done

Sent from my LGMS631 using Tapatalk
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

Oh, this looks sweet. I'm down for one if available. Raw kit with international ship (Canada).
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

Lurksmith said:
Oh, this looks sweet. I'm down for one if available. Raw kit with international ship (Canada).
Click to expand...


No problem, still making these. Can have a raw kit ready to ship in a couple days. Will PM you when it's ready. :thumbsup
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

Mini nuke arrived safe and sound today. Solid kit, it'll be a fun build. Thanks again!
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

Update time.


As of right now, I am no longer taking any new orders for assembled kits. I'm afraid my spare time for assembling them is diminishing, and would still like to build my nuke kits in the near future. So I am only offering raw kits for any new orders.

As for any possible new orders, I do still have three spots left. As I stated in the first post, I only bought enough of the hardware to cover 25 nuke kits. I have enough hardware left to cover three more nuke kits, and that's it.

So if you want a raw kit, now's the time. I'm looking to close this project out soon so I can move on to the next one. If nobody else wants a kit, I will close this run as soon as the last three orders are served.




Also, for those who have received their nukes, please use the feedback system if you have not already!!! Thanks!
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

I'd like to pick up a raw kit but wouldn't be able to pay you till next Tuesday if that's ok?
 
Re: Fallout 4: Mini Nuke Prop from 3D Printed Master

petrolmonkey said:
I'd like to pick up a raw kit but wouldn't be able to pay you till next Tuesday if that's ok?
Click to expand...


That is just fine. Payment is not due until the kit is ready to ship. And it won't be ready by Tuesday, I'd say a couple weeks at the moment. So, no problem! :thumbsup
 
You must log in or register to reply here.

Similar threads

GhostMinion
Done / Completed Fallout 4 Fusion Core Resin Kits ***RUN FULL***
2
Replies
25
Views
1,764
GhostMinion
GhostMinion
Gombabomb
Fallout 3 Mini Nuke Build - 3D Printed Prototypes and Final WIP - IMAGE HEAVY
2
Replies
20
Views
4,738
Rothmore
Rothmore
Back
Top