Descendant's 3 Hades Coat

SchubroProductions

Sr Member
RPF PREMIUM MEMBER
I was commissioned by our local zoo to create a Hades Jacket from Descendant's 3 on the cheap. I found a $25 Leather Trench Coat at my local goodwill and went from there. I cut the coat to match the screen version and used the left over leather scraps to create a new collar and lapels. The coat itself is supposed to be somewhat asymmetrical. I added tons of round and pyramid studs on the shoulder, lapels and back and all along the front. I haven't learned how to use an airbrush yet, so I hand painted the skulls and flames onto the coat with acrylic and sealed with a clear matte sealant spray. It took about 2 weeks working off and on at night after work.
 

Attachments

  • 1_thriftStoreCoat.JPG
    1_thriftStoreCoat.JPG
    855.8 KB · Views: 96
  • 2_cutCoat.JPG
    2_cutCoat.JPG
    282.7 KB · Views: 126
  • 3_coat_front_CU_1.JPG
    3_coat_front_CU_1.JPG
    346.6 KB · Views: 93
  • 4_coatBAck_skull.JPG
    4_coatBAck_skull.JPG
    508.6 KB · Views: 87
  • 5_coatBack_Details.JPG
    5_coatBack_Details.JPG
    317.9 KB · Views: 144
  • 6_coat_sleeveFlames.JPG
    6_coat_sleeveFlames.JPG
    287.5 KB · Views: 62
  • 7_coat_sleeveSkull.JPG
    7_coat_sleeveSkull.JPG
    233.1 KB · Views: 75
  • 8_coat_sleeveSkull2.JPG
    8_coat_sleeveSkull2.JPG
    462.2 KB · Views: 59
  • 9_coatFront_halfway.JPG
    9_coatFront_halfway.JPG
    276.9 KB · Views: 66
  • 10_finalCoatFront.JPG
    10_finalCoatFront.JPG
    334.6 KB · Views: 132
  • 11_finalCoatBack.JPG
    11_finalCoatBack.JPG
    311.1 KB · Views: 120
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top