trooper
Sr Member
I'm happy to say that the bowcaster is moving along.
you can see my thread here -- The anh chewbacca bowcaster, very accurate !! Kit run
this run will be done in several parts, one to manage better, and two, to keep the cost down into more manageable bites.
the first parts will be the stock which is $250
and second is the bow $165, or prod as it's called in for a crossbow. it is made from 6.5mm aluminum , and machine bent to exact match the real bow. these will be made in around 3 weeks. and will include the washer and bolt if you want it, you need to tell me if you do.
next is the side plates and details
the set will include
1 resin block for the plates to mount to
1 left , 1 right plate
2 flat discs
2 tapered discs
1 rca jack
4 pully discs
1 philmore knob
1 amp knob
1 roland small knob
1 full set of screws
price per set is $146 plus shipping
this project will take some time, possibly up to 2 years to complete. this is NOT a throw together bowcaster, this is and will be, a very thought out and meticulously made kit.
until parts are designed and a prototype is made will I know what the cost per run will be.
anyone who is interested in getting on board with this project needs to do so now, there WILL NOT be a second run at this.
you will need to first pm me your
paypal id
email address
a full mailing address
and full name
any other contact info you wish to give is up to you
please be sure to state weather you need the frame , bow or both so i know what to invoice you for
I will keep that info in a file, and as parts come up you will be notified , it is your choice to purchase or not. at any time you want off this list simply pm me and say "you want off the bowcaster list" and I will remove you. once you order you own the parts, no refunds.
here are some pics
this is where it started
later found out this was a very rare model lol...oops the stock openings were made from the factory
after a year and a half of measurements fiddling, filing, sanding, fiddling...repeat several times. tons of emails back and forth from two very helpful gents here, with out them this simply would not have happened, I cant thank them enough.
here is the aluminum prod.
all orders need to be paid by april 20th in order for me to place your order . please contact me if this is an issue
bowcaster run list .........
for frame and prod
1 cyberblock...................... prod..................paid...shipped
2 lonepigeon .....................prod...................paid...shipped
3 mandingalow.................. prod.............. ... paid...shipped
4 Asavage..........................prod..................paid...shipped
5 protocoldroid ..................prod..................paid...shipped
6 russellsch........................prod................. paid...shipped
7 ataru72ita........................prod...frame......paid
8 Mr_Sparkle......................prod..................paid
9 Lycanbacca.....................prod...frame ......paid
10 tomm1999.....................prod...frame .....prod paid
11 BACABreath .................prod..................paid...shipped
12 dandirk...........................prod..frame .....paid
13 Cameron .......................prod................. paid...sjipped
14 Tboy7630..................... .prod...frame.....paid...shipped
15 RhinoActual ..................prod....frame.....paid
16 timw1301 ......................prod....frame ....paid
17 thom ..............................prod .................paid
18 damon5973....................prod..................paid
19 mgoob............................prod....frame.....prod paid
20 seneca...........................prod..................paid...shipped
21 jetsetwilly........................prod....frame....paid
22 vaderman..................................frame....paid......shipped
23 3DImpact.......................prod.....frame.....paid
24 sjanish...........................prod.....frame.....paid.....shipped
25 blindvoyeur................... prod.....frame.....paid
26 newmagathea................prod....frame .....paid
27 roninblade......................prod...................paid
28 hairyloft………………….prod...frame...…paid
29 kitjunky…………………..prod...frame and detail plate set...
30
If I missed any one please let me know
update 5/9/18
prods should be done by the end of the month
..............................update 6/7/18...……………………………………………..
!!!!!!!! prods are here !!!!!
BUT he forgot the bolt washers and did not make the center holes.. I can drill the holes. but we'll be waiting for the washers
here is a pic of a couple of the prods
................................update 6/20/18...…………………………………………………….
and for those who would like a resin kodak knob I can supply that for you until you secure the real one.
I also have a second option im thinking of. the opposite knob on the kodak could have the hollow filled and cast in a mold making it one, so that the detail is in the resin. I will make a mold and see how it works. I have several of those second knobs
also he the trigger discs ready, I ordered a ton of these to get the price down, so weather your on the list or not I have trigger discs for sale. $35 a set
these measure exactly the same as the vintage ones I have.
in this pic I set the copy next to a vintage one, the vintage is on the right
*************************************************************************************************************
6/22/18
this morning when I got up I felt the urge to highlight this last part, to make sure that every one knows and understands the options im giving. you do not have to buy the new parts at this time, please simply pm me and tell me you want your current paid order to be shipped, I will send you an invoice for the shipping only.
please, if you have any questions pm me
here are 3 options I can do since these two runs came in so close to each other.
1. I can prepare to ship your current paid order now
2, I can hold on shipping everything until I have the pullies
3, or I can ship everything I have now and ship the pullies when they come in
this way you can start putting it together and go pew pew pew !!! gaaagagagga !
update 9/18/18
---------------------------------------------------------------------
ok so I have fallen behind on getting updates, sorry guys I though I posted this a few weeks back.
the are pullies in stock, they are made to the dimensions of a vintage pully. the machinist did an amazing job!!!!
my pic limit on this post has reached it's limit. please see post #112 for pics
Limited Run - Star wars anh chewbacca bowcaster run
UPDATE 11/5/19
-------------------------------------------------------------------------------------
I just got off the phone with the machinist who is local to me for the front mount parts for the barrel. I should have an estimate soon, hopefully the next couple days. it's been hard to find a machinist firstly who is actually willing to do these parts, second who will be reasonable on price.
this is the same guy that did the previous parts for me on this run, so im very excited to have him back
you can see my thread here -- The anh chewbacca bowcaster, very accurate !! Kit run
this run will be done in several parts, one to manage better, and two, to keep the cost down into more manageable bites.
the first parts will be the stock which is $250
and second is the bow $165, or prod as it's called in for a crossbow. it is made from 6.5mm aluminum , and machine bent to exact match the real bow. these will be made in around 3 weeks. and will include the washer and bolt if you want it, you need to tell me if you do.
next is the side plates and details
the set will include
1 resin block for the plates to mount to
1 left , 1 right plate
2 flat discs
2 tapered discs
1 rca jack
4 pully discs
1 philmore knob
1 amp knob
1 roland small knob
1 full set of screws
price per set is $146 plus shipping
this project will take some time, possibly up to 2 years to complete. this is NOT a throw together bowcaster, this is and will be, a very thought out and meticulously made kit.
until parts are designed and a prototype is made will I know what the cost per run will be.
anyone who is interested in getting on board with this project needs to do so now, there WILL NOT be a second run at this.
you will need to first pm me your
paypal id
email address
a full mailing address
and full name
any other contact info you wish to give is up to you
please be sure to state weather you need the frame , bow or both so i know what to invoice you for
I will keep that info in a file, and as parts come up you will be notified , it is your choice to purchase or not. at any time you want off this list simply pm me and say "you want off the bowcaster list" and I will remove you. once you order you own the parts, no refunds.
here are some pics
this is where it started
later found out this was a very rare model lol...oops the stock openings were made from the factory
after a year and a half of measurements fiddling, filing, sanding, fiddling...repeat several times. tons of emails back and forth from two very helpful gents here, with out them this simply would not have happened, I cant thank them enough.
here is the aluminum prod.
all orders need to be paid by april 20th in order for me to place your order . please contact me if this is an issue
bowcaster run list .........
for frame and prod
1 cyberblock...................... prod..................paid...shipped
2 lonepigeon .....................prod...................paid...shipped
3 mandingalow.................. prod.............. ... paid...shipped
4 Asavage..........................prod..................paid...shipped
5 protocoldroid ..................prod..................paid...shipped
6 russellsch........................prod................. paid...shipped
7 ataru72ita........................prod...frame......paid
8 Mr_Sparkle......................prod..................paid
9 Lycanbacca.....................prod...frame ......paid
10 tomm1999.....................prod...frame .....prod paid
11 BACABreath .................prod..................paid...shipped
12 dandirk...........................prod..frame .....paid
13 Cameron .......................prod................. paid...sjipped
14 Tboy7630..................... .prod...frame.....paid...shipped
15 RhinoActual ..................prod....frame.....paid
16 timw1301 ......................prod....frame ....paid
17 thom ..............................prod .................paid
18 damon5973....................prod..................paid
19 mgoob............................prod....frame.....prod paid
20 seneca...........................prod..................paid...shipped
21 jetsetwilly........................prod....frame....paid
22 vaderman..................................frame....paid......shipped
23 3DImpact.......................prod.....frame.....paid
24 sjanish...........................prod.....frame.....paid.....shipped
25 blindvoyeur................... prod.....frame.....paid
26 newmagathea................prod....frame .....paid
27 roninblade......................prod...................paid
28 hairyloft………………….prod...frame...…paid
29 kitjunky…………………..prod...frame and detail plate set...
30
If I missed any one please let me know
update 5/9/18
prods should be done by the end of the month
..............................update 6/7/18...……………………………………………..
!!!!!!!! prods are here !!!!!
BUT he forgot the bolt washers and did not make the center holes.. I can drill the holes. but we'll be waiting for the washers
here is a pic of a couple of the prods
................................update 6/20/18...…………………………………………………….
and for those who would like a resin kodak knob I can supply that for you until you secure the real one.
I also have a second option im thinking of. the opposite knob on the kodak could have the hollow filled and cast in a mold making it one, so that the detail is in the resin. I will make a mold and see how it works. I have several of those second knobs
also he the trigger discs ready, I ordered a ton of these to get the price down, so weather your on the list or not I have trigger discs for sale. $35 a set
these measure exactly the same as the vintage ones I have.
in this pic I set the copy next to a vintage one, the vintage is on the right
*************************************************************************************************************
6/22/18
this morning when I got up I felt the urge to highlight this last part, to make sure that every one knows and understands the options im giving. you do not have to buy the new parts at this time, please simply pm me and tell me you want your current paid order to be shipped, I will send you an invoice for the shipping only.
please, if you have any questions pm me
here are 3 options I can do since these two runs came in so close to each other.
1. I can prepare to ship your current paid order now
2, I can hold on shipping everything until I have the pullies
3, or I can ship everything I have now and ship the pullies when they come in
this way you can start putting it together and go pew pew pew !!! gaaagagagga !
update 9/18/18
---------------------------------------------------------------------
ok so I have fallen behind on getting updates, sorry guys I though I posted this a few weeks back.
the are pullies in stock, they are made to the dimensions of a vintage pully. the machinist did an amazing job!!!!
my pic limit on this post has reached it's limit. please see post #112 for pics
Limited Run - Star wars anh chewbacca bowcaster run
UPDATE 11/5/19
-------------------------------------------------------------------------------------
I just got off the phone with the machinist who is local to me for the front mount parts for the barrel. I should have an estimate soon, hopefully the next couple days. it's been hard to find a machinist firstly who is actually willing to do these parts, second who will be reasonable on price.
this is the same guy that did the previous parts for me on this run, so im very excited to have him back
Last edited: