Re: BTTF 2 - Futuristic "Lite" Beer bottle UPDATE POST #50
I think we can start shipping next week!
I think we can start shipping next week!
Last edited by a moderator:
-
Welcome to the Project Runs Forum!
This forum is intended for interest gauging and active runs. Due to the transient nature of this forum, please keep all research and ongoing discussion in one of our main forums so your information is not lost.
Only Premium Members can start a new run.
Interest BTTF 2 - Futuristic "Lite" Beer bottle READY TO SHIP
- Thread starter Sarednab
- Start date
Spiderstella
Sr Member
Payment and pm sent...
can’t wait to get mine,
thank you for all your hard work
can’t wait to get mine,
thank you for all your hard work
Hi mate! It is 179$ plus shipping
el toro
Sr Member
All you got for me is light beer in the future?
Spiderstella
Sr Member
looking good, how easy was the stickers to apply? And how dose it look from the back where the stickers meet?
looking good, how easy was the stickers to apply? And how dose it look from the back where the stickers meet?
I'm not the best at applying these things, and I'm also a perfectionist, so not a great combo. BUT the top sticker is pretty pliable and I was able to get it after 4 tries. It didn't meet totally flush, but that might be my fault. The bottom sticker was really easy to attach. He made it a little long so you can line it up and cut off the excess.
Duck9000
Well-Known Member
http://www.sarednabworldprops.com/rpf/lite.jpg
http://www.sarednabworldprops.com/rpf/lite1.jpg
http://www.sarednabworldprops.com/rpf/lite2.jpg
http://www.sarednabworldprops.com/rpf/lite3.jpg
Hi guys,
I would open a thread just to see what interest have a prop like this!
We are in 2015... this is the BTTF years, the FUTURE! We must complete our display with all props seen in the movie.
We already done the Milk Valley and we are satisfed with it! Now the next step... it is the BEER bottle seen in Marty's house in 2015.
This is a very labourious work...
Don't ask me the price. We still don't know the total cost. All pending by interest that people have for this.
Probably it will be made in resin with removable cap
If you could be interested in a project like this, please let me know and I'll add your name in list
LIST:
1 - EmmaInCandyland - [FULL PAYMENT SENT]
2 - Diana88. *
3 - MattgomeryBurns - [FULL PAYMENT SENT]
4 - Davidsjferguson *
5 - zethander
6 - KevinBGoode
7 - thatsmybuddy
8 - kurtyboy - [FULL PAYMENT SENT]
9 - Mr Bubbles
10 - mercureyx
11 - boochydog*
12 - markpoon - [FULL PAYMENT SENT]
13 - The9thWonder
14 - Yeats
15 - AlberR213
16 - rowdecowby
17 - brivette007
18 - ShortWookie
19 - tomm1999
20 - MilesAtreides
21 - badges2nz
22 - TSC88mph
23 - bump19
24 - petowalker - [FULL PAYMENT SENT]
25 - BrotherWilliam - [DEPOSIT SENT]
26 - mac malloy
27 - Womble68 - [DEPOSIT SENT]
28 - Nasedo
29 - Spiderstella - [FULL PAYMENT SENT]
30 - Markpoon
31 - mp1997
32 - squeaks
33 - Filippo Prisco - [FULL PAYMENT SENT]
34 - fettchick. *
35 - darko@totalgeek*
36 - OncleCharlie - [DEPOSIT SENT]
37 - eltoro - [FULL PAYMENT SENT]
http://s29.postimg.org/6qsrzp31j/12348635_1284242034924444_621285921_n.jpg
http://s29.postimg.org/o5d07z06f/12380230_1284239754924672_800886304_n.jpg
Beautiful prop!
Petowalker
Well-Known Member
Tasty!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
A tip for applying the stickers (did it on my Blade Runner whiskey bottle): use painters tape to set a "guideline" for the stickers, so you can place the actual stickers against the tape. That way you can try to put the guiding tape as perfect as possible (restarting as much as you want), before applying the actual stickers.
It looks so good! UPS had to delay my parcel grrrr, should be able to pick it up tonight <3 Cannot wait!!!
<3<3<3<3<3
I REALLY want the Slurpee haha!!!
Similar threads
