BioShock 2 Subject Delta Helmet (Kit or Finished)

[StaggzCosplay]

Hi folks!

6/17 UPDATE! 1 KIT SOLD 1 REMAINS. BOTH FINISHED STILL AVAILABLE We're finally able to offer casts of this guy. At this time we ARE ONLY OFFERING 2 KITS AND 2 FINISHED at a time. Let's start with pics and then move on to information:

For more finished pictures, please view my original thread here: Subject Delta- Bioshock 2

IMPORTANT NOTES:

1. We are using a new master for the helmets that is the same model but updated to have a slightly better texture and is overall cleaner. Please see that model below. The above model is a prototype and was done with a mold that unfortunately was significantly flawed. The new helmet mold is not.
2. The helmet is not designed to be worn by a person WITHOUT any sort of padding or a bodysuit. I used a custom made fiberglass bodysuit to make mine proportional. These are HUGE helmets, Big Daddies are meant to be over 7' tall with helmets much bigger than a traditional diving helmet.

FINISHED HELMET:

• Includes all pieces seen above, including electronics.
• Electronics include lights in the visor, portholes, and back tanks
• Includes ropes and diving weight
• Painted by a professional artist with 15 years of painting experience.
• Will be shipped in two boxes due to size and to keep safe. Tanks and backplate are removable.
• Price is $2,400.00 plus calculated shipping (you must send me your address before non-refundable deposit and shipping will be due after completion).
• Non-refundable deposit of $1,000. $1,400 plus shipping is due after completion
• Lead time is 3-6 months.
• Not designed to see directly out of the visor, designed to put an actual drone style FPV camera into the "camera" on top. If you are planning to wear this and want to add a camera in, please note that to us (we will ask as well) so we can leave that area removable for the camera placement.

HELMET KIT:
Kit will include the following.

• Helmet, pre-trimmed and ready for primer and paint
• Tube holders for helmet and tanks
• Rivets
• Visor (your choice of 4. There is a version based off the launch trailer, the in-game model, and two others that are variations on the in-game model)
• Wingnuts and wingnut bases
• Tanks and lids
• Backplate
• Tubes with sheathing
• Tube for two middle tanks
• Middle tanks tube holders and lids, along with end caps
• Chest portholes
• Rope swings
• Camera front
• Diving Weight
• Helmet and pieces are cast and created in a combination of TC-1630, Featherlite Resin, Smoothcast 325, expanding foam, and 3D printed resin.
• Lead time for a kit is approximately 4-10 weeks, perhaps shorter depending on workflow but we’re always happy to keep people posted.
• Price is $950 for a kit plus calculated shipping. Please let me know your shipping address and I will calculate that for you, before taking a deposit.
• Deposit is $475 and the rest (475) is due upon completion with shipping.

Here is pictures of the visor options, along with what the new master AND a raw helmet cast looks like. Remember, the kit will include ALL other pieces as well, this is just a couple of pictures to give you an idea of what the helmet kit is, the visor options, and how lightweight the helmet is. We are happy to take more pictures if needed of other pieces.

We take Paypal Goods and Services ONLY. Please no Friends and Family, as we want to make sure both our customers and ourselves are kept safe.

Any pictures or information needed, please let me know as well and we're happy to send your way. If you're interested, please send me a direct message and we're happy to help however we can. To reiterate, at this time WE ARE ONLY OFFERING 2 KITS AND 2 FINISHED.

Thanks!

 

[azuljgw]

Any helmets left for purchase?

 

[StaggzCosplay]

Yep! Just sent you a PM

Any helmets left for purchase?