Batman Prop Help

Rbcarter88

New Member
Hi everyone,

This is my first time posting on here and was just after some advice? I am wanting to make a bust of William Shakespeare similar to the one used in the 60's Batman TV Show(see image). I know what is required for the electronics of it but I am unsure how I would actually make the bust? What would be the best way to make it etc?

Any help would be much appreciated!

batman-shakespeare-bust-1.jpg
 

Hazmat

Well-Known Member
I'd imagine that the original was probably a replica of a actual bust, probably pretty commonplace. If you found that then look up making a 2 part mold on youtube, There are tons of videos watch a couple to get an idea of the process. Once you have a copy, cut off the head, and a hinge you're basically done.
 
This thread is more than 7 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top