Limited Run Batman 89 Speargun Kits

[Valor]

This is a Limited Run thread for kits to build the V2 of my Batman 89 Speargun and Attachments.

This replica is almost a year in the making. You can see the thread that chronicles its development here:

Batman 89 Speargun *COMPLETE*

So here we are. Apparently it takes 9 months to birth a Batman 89 Speargun. This is the culmination of so much research, modeling, prototyping, remodeling, more research, more research, and production to get a tiny batch of this finished product. It's not perfect. Nothing is. But it feels so...

www.therpf.com

SPEARGUN KIT : $250 shipped
Included in this kit will be all the pieces to build one Speargun and spear:

• Twelve 3-D printed pieces for the gun and spear​

• Lasercut aluminum side panel​

• Lasercut brass spear fins​

• Rare-earth magnets on center post to allow the gun to separate like in the film​

• Metallic cord for for the reel​

• Brass insert for the main barrel​

• Stainless Steel spear rod​

• All the hardware you need to build it​

ATTACHMENT KIT : $75

• 3-piece Bolo Attachment, including magnetic attachment and metallic cord.​

• 3-piece Tranquilizer Dart Attachment, including magnetic attachment.​

FULL SYSTEM : $325
• Math is hard. I did it for you

ACCURACY
These kits will be for the V2 version of the Speargun shown in my build thread. What's changed between V1 and V2? A LOT of little things that make this more accurate to the on-screen guns. After my initial V1 run, my team set out to identify details that brings this speargun closer to the screen-used spearguns. We were able to gain access to exclusive imagery and measurements of some of the screen-used guns now in private collector's hands. There are details on this gun that no replica has captured correctly, and we're pretty proud of that!

FUNCTIONALITY
When assembled, this gun is loaded with functionality. The gun separates into two pieces like in the film via a central post and rare-earth magnets. The little reel can be spun by hand, the handle flips open and closed, the trigger is spring loaded, and the cylinders can be rotated.

MATERIALS
This kit will be 3-D printed with durable SLA White Resin by RPF's own Corellia Creations. The pieces are sharp, smooth, highly detailed and require almost zero finish work before paint. The main body and front end will be printed in a more durable Tough Resin to better accommodate tapped screws. Several parts will be laser cut aluminum and brass and all the hardware is included.

TIMING
I'm looking to produce these in the next 4-8 weeks. I will post updates as I Order and receive materials to keep everyone in the loop.

RUN SIZE
20 kits

SHIPPING
US buyers: Prices include shipping in the US.
International buyers: Contact me for details before paying.

PAYMENT
Payment via Paypal to valorreplicas@gmail.com secures your spot in the run.


INTERESTED PARTIES
1) Valor — Speargun + Attachments SHIPPED
2) hokie1 — Speargun + Attachments SHIPPED
3) Nightwing Returns — Speargun + Attachments SHIPPED
4) Nightwing Returns — Speargun + Attachments SHIPPED
5) pjw — Speargun + Attachments SHIPPED
6) MattMunson — Speargun + Attachments SHIPPED
7) Ron — Speargun + Attachments SHIPPED
8) E Williams — Speargun + Attachments SHIPPED
9) Michael Keaton — Speargun + Attachments SHIPPED
10) ave4uevoli — Speargun + Attachments SHIPPED
11) JamesM242 – Speargun Only SHIPPED
12) spiderfan11 – Speargun + Attachments SHIPPED
13) greg day – Attachments Only SHIPPED
14) BlindVoyeur – Speargun + Attachments SHIPPED
15) Nick Murray – Speargun SHIPPED
16) KidL – Speargun + Attachment SHIPPED
17) The Jason – Speargun + Attachment SHIPPED
18) Brandon - Speargun + Attachments SHIPPED
19) QCWolf – Speargun + Attachments SHIPPED
20) Digital Mayhem – Spearhead + Attachments PAID-D
21) Julio – Speargun Only SHIPPED


Please note that the photos below are of my V1 speargun. The drawings below reflect the V2 design details.

 

[hokie1]

100% in.

 

[Nightwing Returns]

I'm in

 

[pjw]

I’m in

 

[pjw]

Are there any plans for the alternate attachments?

 

[MattMunson]

Are there any plans for the alternate attachments?

Seconded.

also, I'm in.

 

[mudhorn]

Also interested.

 

[Valor]

Hey guys. Thanks for the interest in the other attachments. To keep things simple I’m starting with just the base gun. But there are at least two of the attachments in the works for the near future.

 

[mudhorn]

Hey guys. Thanks for the interest I. The other attachments. To keep things simple I’m starting with just the base gun. But there are at least two of the attachments in the works for the near future.

I’m in for all attachments you offer

 

[E Williams]

Ya got me, I'm in

 

[Nightwing Returns]

Not gonna lie, this thing looks fantastic

 

[Michael Keaton]

I'm in. Really need the bola and tranquilizer attachments too.

 

[Valor]

I'm in. Really need the bola and tranquilizer attachments too.

Michael, I mean .... don't you have your own

 

[gregday]

I'd be in for the attachments.

 

[Valor]

I have modeled up the Tranquilizer Dart and Bolo attachment. They will snap into this speargun when finished.

 

[ave4uevoli]

I'm definitely in

 

[Valor]

Okay. Let's do some Attachments!

I will be offering this two ways.

1) Speargun Kit: for building a Speargun and Spear
2) Attachment Kit: for building a Bolo Launcher and Tranquilizer Dart Attachment

If you've already expressed interest in the Speargun Kit, please let me know if you're interested in the Attachment Kit too. Price for the Attachment Kit is coming very soon.

Here's a quick hands-on video I shot showing how the whole Speargun system works with some PLA prototypes I printed. (Remember, the pieces in these kits are smooth SLA resin. The prototypes are just working models for me.)

 

[JamesM242]

Hello - count me in for the speargun kit please!

 

[spiderfan11]

Valor, you knew this was coming: Sign me up for the speargun

 

[hokie1]

Interested in attachments.