Project updates 20 December: ESB Hoth blaster test build
Yes Jason, they appear on a few props in ANH/ESB that we know of so far.
I put this Hoth blaster together using parts I had on hand (and a few from Odiwan72 - thanks again). It's really just a test run for my final Hoth blaster which will be based on an MGC with real M19 and BD parts.
This one is a modified Denix with custom Odiwan72 mount, machined flash hider, real Thorens turntable disc, realistically painted/weathered resin M19 with glass lenses (see previous post above), real piston halves and accurate left side detailing using the recently discovered information.
Re: Project Updates. 20 December: ESB Hoth blaster test build
Thanks T. If you are careful it works with one. I scored it down the middle with a blade and snapped it in half. That was resin of course. When I use real plates on my final build I'll have to be extra careful!
Re: Project Updates. 20 December: ESB Hoth blaster test build
I am currently trying to build the A280 Hoth blaster and it seems more people lean toward the Endor blaster so I am trying to get to the bottom of greeblies. Regarding the scope shroud on the A280 Hoth blaster...what exactly is it and is there anywhere I could perhaps obtain one?
Thanks!
I finally got round to upgrading my Vibro-Ax with some more accurate parts. I never liked the Co2 cartridges and plumbing piece. It's now all real parts apart from the cylinder 'cigar' and C3P0 bolt.
Looks good! I've had some parts for this for about 16 years now! I never did hear what the parts you're referring to actually were. Last time I checked one of the threads they were still using generic plumbing parts.
Re: Project updates 20 December: ESB Hoth blaster test build
Thanks Kurtyboy! Thas awesome that the stand fits the mauser as well. Im a member over at propsummit so i think ill head over and get a couple if they are still available. This is the cleanest stand i have seen yet, you have a really nice display there.
Project Updates 15 Feb 2016: Carbonite panel and bowcaster upgrades
Shhit, we lost Tom!...
Some Carbonite panel upgrades again. The last lot of 'nipples' now replaced with original parts.
Made my own highly detailed decals.
Upgraded resin viewer to real one and decided to include the hood to match the RotJ scene (this panel was not present in ESB). Also replaced a dead yellow LED.
These decals were made with paint stencils which appears to be the case on the original prop (the rest are stickers).
Ready to rock!
Bigturc's machined knobs will be the next upgrade. Cant wait!
Bowcaster also got some upgrades. The large and small amplifier knobs which were modern replacements have been upgraded with vintage ones. All bowcaster knobs are now vintage.