zanefielding
Member
I did, but when I wrapped it, the diameter was off, so I have 9 vents, it's weird, but it looks like it might be right.
Sent from my SCH-I545 using Tapatalk
Wrong reply. sorry.
I did, but when I wrapped it, the diameter was off, so I have 9 vents, it's weird, but it looks like it might be right.
Sent from my SCH-I545 using Tapatalk
Nice. I did a low tech version of what you did. I 3D printed the tip with a 10 sided flat surface and the vents. Then bolted it to a drill and sanded it down to a smooth cylinder.
Speaking of which, is that the number you came up with for how many side vents to use? 10?
Hi Faroth- Would you be open to sharing the 3d files for your barrel? I am in the process of modifying the nerf blaster and hate the barrel. Its not really the best excuse to buy a lathe though. If I can get away with printing that would be great.
Sure. Mine was made for the 1 to 1 scale airsoft rifle that I used for the base, so this may be a bit large but you should be able to easily scale it down.
I found the nerf blaster barrel odd. They got a lot of other little details right on the gun then they make the barrel completely different. They probably were working on artists sketches made long before the movie props were set.
Anyway, You can find all the STl files on my thingiverse page.
http://www.thingiverse.com/thing:2069111
Let me know if you have any questions, and post your version when you are done too!
I have been working on this for a while as well.
Has anyone addressed the red button on top of the scope rail. I looks like the blanking caps used on lightsabers.
Any thoughts?
This is the only pic I have seen it in, but most pics have the full rifle and it is an official pic as opposed to a lot of the artwork on in-store displays and boxes.
https://fsmedia.imgix.net/72/2b/c3/...ndorpng.png?dpr=1.5&auto=format,compress&q=75
I wondered about that myself. That is the only picture the red "light" shows up in. As far as I can tell, I believe it is a red cap to one of the pen tool thingies he has in his left shoulder. So whatever the red thing is, it is behind the gun, not on it.
View attachment 702480
Finally finished with mine. I used the nerf blaster as my base and 3d printed the barrel that Faroth provided. I am fairly happy with it but after taking a pic I noticed all the flaws, especially the color mismatching between the barrel and the receiver. I thought the two different colors of the barrel and receiver would look good and make sense because of how this gun functions but now looking at it closely, I dont like it.
View attachment 704161
Anyone have a shot of the butt of the upper where the buffer tube normally attaches, looks like a bracket with some dove tail slots in it, don't recognize it as anything for say a .22 ar conversion which does not need the buffer to function.
Dual Caliber mags!! or something...Some great shots of Diego Luna showing off Cassian's blaster on this week's The Star Wars Show.
View attachment 690578View attachment 690577View attachment 690576View attachment 690575View attachment 690574View attachment 690573View attachment 690572View attachment 690571View attachment 690570View attachment 690579View attachment 690580View attachment 690569