robo3687's Iron Man Pep Files - SD War Machine links page 73

Re: robo3687's Pep Files - first post updated - please read

hold your middle or right button down

fab job robo, once i'm in the new house I plan to start full tilt on your models (might need to edit them a bit to include my attachment/how I get into it, system. But plan to have it down and all tricked out for aug 2011
 
Re: robo3687's Pep Files - first post updated - please read

giz said:
I knew I should have downloaded! haha I would LOVE to get my hands an actual 3D file
Click to expand...
If you have Pepakura Designer, it'll export the .OBJ format, which almost any 3D program will natively read/write. I've done it on a couple of pieces to make minor alterations (in my 10-year-old copy of Lightwave, it's been just a little while since I've done any real 3D work :lol), then just import it back into Pepakura to unfold again.
 
Re: robo3687's Pep Files - first post updated - please read

Pilot said:
If you have Pepakura Designer, it'll export the .OBJ format, which almost any 3D program will natively read/write. I've done it on a couple of pieces to make minor alterations (in my 10-year-old copy of Lightwave, it's been just a little while since I've done any real 3D work :lol), then just import it back into Pepakura to unfold again.
Click to expand...

awesome, thanks for the tip!
 
Re: robo3687's Pep Files - first post updated - please read

I'm sorry to tell you this Robo, but due to some home issues, I cannot finish the file you sent me, I con only tell you what I have collected from examining the file and putting part of it together, I have run into a problem where I only get about 10-15 mins of free time and it wont be clearing up until later in the week, please send a me PM if you'd like to hear any of my thoughts about the file so far though.

keep on doing what you do,
-Logan
 
Re: robo3687's Pep Files - first post updated - please read

All my pepping is done (minus my next helmet) and the second coat of resin is drying now... couple more days and the bondo process will begin!
 
Re: robo3687's Pep Files - first post updated - please read

brimst0ne13 said:
including boots hip pods spine and neck seal? insane!!!
Click to expand...

Here's a few pics I took midway through doing the resin. I had the brace, back, chest done already. I'll have to take the camera out in the morning for round 3, since I somehow missed taking pics of the biceps and fingers.
 
Re: robo3687's Pep Files - first post updated - please read

Stryken said:
Here's a few pics I took midway through doing the resin. I had the brace, back, chest done already. I'll have to take the camera out in the morning for round 3, since I somehow missed taking pics of the biceps and fingers.
Click to expand...


Good work. Looks like we are pretty close to the same stage right now, i have everything preped but the hands, tomorrow the rest of the suit will get resin. I look forward to the pictures, the further I get along with this I realize just how awesome it is.
 
Re: robo3687's Pep Files - first post updated - please read

Dando said:
Good work. Looks like we are pretty close to the same stage right now, i have everything preped but the hands, tomorrow the rest of the suit will get resin. I look forward to the pictures, the further I get along with this I realize just how awesome it is.
Click to expand...

Thanks! Seeing everyone's progress helps keep the motivation going.

I'm scared I'm going to mess it up with the body filler... it looks so impressive as is. People pretty much crap their pants when I show them the pic I took wearing the parts I had ready a couple weeks ago.
 
Re: robo3687's Pep Files - first post updated - please read

Hey Stryken! Nice progress man!! Can't wait to see more. You should start your own progress thread so we can see it start to finish!

Question if you don't mind, can you give us your waist size and tell us what scale / size you used for the abs and codpiece. Those are the pieces i know a lot of us have trouble getting to fit and it helps give us an idea where to go with it if we have a size reference.
 
Re: robo3687's Pep Files - first post updated - please read

DarthVeach said:
Hey Stryken! Nice progress man!! Can't wait to see more. You should start your own progress thread so we can see it start to finish!

Question if you don't mind, can you give us your waist size and tell us what scale / size you used for the abs and codpiece. Those are the pieces i know a lot of us have trouble getting to fit and it helps give us an idea where to go with it if we have a size reference.
Click to expand...


I set it at 27.952929 for the cod piece and abs. I wear a 34 for pants and this scale seems to be about right. I'm trying to slim down a bit before Halloween.

What I did to test the size was print off the top parts of the cod and did a tester to see how it would fit. Did the same with the abs, printed off some parts to wrap around to check the size.

Hope this helps!
 
Re: robo3687's Pep Files - first post updated - please read

Hey Robo if you still need a test builder for the commando files I would be honored to help.
 
Re: robo3687's Pep Files - first post updated - please read

Stryken - good progress man, looking forward to seeing more

jokingking - you've got mail....
 
Re: robo3687's Pep Files - first post updated - please read

I just wanted to throw these photos up...they're a little low res, but should be good enough for reference on coloring etc....
 
...aaaaand, another scaling question

I saw this asked earlier in the forum (or maybe it was another thread?) but I don't believe anyone ever answered. Is it possible to scale only in one dimension? I'm quite long/lean in the arms and legs (i think "scrawny" is the technical term). I think when i scale some of these parts they're going to be pretty bulky on me. Wondering if i can stretch them just a little to compensate and not make them so wide? Haven't figured out how to do the in Pepakura yet, if it's even possible?
 
Re: robo3687's Pep Files - first post updated - please read

only way i can fathom is to open the files in a 3d editor and literally stretch the pieces, but once you do that, they wont fit each other right. you'd have to resculpt most of the other pieces to match
 
You must log in or register to reply here.

Similar threads

Marthony
Iron Man 2020 helmet pepakura file?
Replies
0
Views
921
Marthony
Marthony
A
Help/input - Iron Man MkIV Helmet: deciding how to address this paint crack?
Replies
0
Views
353
Abb eliten
A
Reynology
Spider-Man Face Shell help
Replies
4
Views
199
Reynology
Reynology
G
RPC Spider-Man Help?
Replies
0
Views
67
gemakus
G
C
PS5 Spider-man emblem help
Replies
1
Views
467
thejuy14
thejuy14
Back
Top