JJ Griffin
Sr Member
Seeing if people would be interested in a run of resin-cast SE-44C's, with moving trigger and internal space for red LED...
Pistol was modeled and custom-refined for our use by @T5H, some of his finest work (which if you have seen some of his other stuff, you know is quite the compliment!). This is the most accurate model of this prop you will find; right down to the taper of the flash hider. I can't get into specifics but it is as close as you are gonna get without casting one of the screen-used pistols.
Like with the F-11D, @JUSTINIAN would handle molding and casting duties. His work speaks for itself.
We're still working on producing the physical Master so no idea of price yet, but should be cheaper than our F-11Ds. The kits will include all of the necessary hardware/screws, with an additional fee if you want a pre-wired LED kit for it. We may also offer a finishing service, if people would want such a thing and we aren't too busy with other projects.
Anyway, just post here if you think you'd be interested, and we'll keep everyone updated on our progress.
INTEREST LIST
1. Jedieddy
2. bearings
3. CAPSLOCK
4. karmajay
5. shull24
6. JDiamond
7. leatherneck
8. Strongbow
9. Wibbleh
10. Bespelov
11. Doug Hoyle
12. RaAlvarez
13. Al May
14. jawafan
15. JOK3R
16. xcelsior
17. blastmaster
18. enterprise0216
19. DarthDawg
20. bogey
21. Zalaian
22. Dehnewblack
23. BILLSID29
24. Gyurma
25. VJ83
26. sntinel
27. silentbob
28. mcflats
29. enigmapc
30. kamakazykid
31. Darkturbo04
32. Markgarcia10
33. thrgk
34. evilestfool
35. TK2216UKG
36. trooper1975
37. wuher da brewer
38. chrijack
39. StarWarrior
40. VaultDweller
41. boochydog
42.
43.
44.
45.
Pistol was modeled and custom-refined for our use by @T5H, some of his finest work (which if you have seen some of his other stuff, you know is quite the compliment!). This is the most accurate model of this prop you will find; right down to the taper of the flash hider. I can't get into specifics but it is as close as you are gonna get without casting one of the screen-used pistols.
Like with the F-11D, @JUSTINIAN would handle molding and casting duties. His work speaks for itself.
We're still working on producing the physical Master so no idea of price yet, but should be cheaper than our F-11Ds. The kits will include all of the necessary hardware/screws, with an additional fee if you want a pre-wired LED kit for it. We may also offer a finishing service, if people would want such a thing and we aren't too busy with other projects.
Anyway, just post here if you think you'd be interested, and we'll keep everyone updated on our progress.
INTEREST LIST
1. Jedieddy
2. bearings
3. CAPSLOCK
4. karmajay
5. shull24
6. JDiamond
7. leatherneck
8. Strongbow
9. Wibbleh
10. Bespelov
11. Doug Hoyle
12. RaAlvarez
13. Al May
14. jawafan
15. JOK3R
16. xcelsior
17. blastmaster
18. enterprise0216
19. DarthDawg
20. bogey
21. Zalaian
22. Dehnewblack
23. BILLSID29
24. Gyurma
25. VJ83
26. sntinel
27. silentbob
28. mcflats
29. enigmapc
30. kamakazykid
31. Darkturbo04
32. Markgarcia10
33. thrgk
34. evilestfool
35. TK2216UKG
36. trooper1975
37. wuher da brewer
38. chrijack
39. StarWarrior
40. VaultDweller
41. boochydog
42.
43.
44.
45.
Last edited:
