Made a door knocker for a friend. The one pictured is not 100% but the 3D model link below is pretty close to the photos I had. You can go in and play with the 3D model here https://cad.onshape.com/documents/a...a838c35467e0415b36/e/a9e71cc7617dd3e299a84dcb the STL files are on tabs at the bottom and if you right click them you will be able to download the files and make your own.
I took some Smooth on XTC3D and painted the parts right out of the printer (I only printed half of the knocker at a time and glued together so no supports were used in the printing.
Let me see what you come up with if you make one...
I took some Smooth on XTC3D and painted the parts right out of the printer (I only printed half of the knocker at a time and glued together so no supports were used in the printing.
Let me see what you come up with if you make one...
Last edited:
