Another project I started and know I’ll never see through. Everything but the dropouts are cast in resin.
Nothing is glued.
All primers and paints used are Tamiya lacquers from rattle cans and very light coats. I was going for a battle-damage suit, so that’s why the pieces I was working on look rough. Nothing that can’t be reversed with some 600G paper and a coat of new paint. I probably saved you a few hours sanding those drops. The PLA lines were terrible!
Deagles and knife are 1:1 scale.
Shipping is free to US. No other options available
on these.
Nothing is glued.
All primers and paints used are Tamiya lacquers from rattle cans and very light coats. I was going for a battle-damage suit, so that’s why the pieces I was working on look rough. Nothing that can’t be reversed with some 600G paper and a coat of new paint. I probably saved you a few hours sanding those drops. The PLA lines were terrible!
Deagles and knife are 1:1 scale.
Shipping is free to US. No other options available
on these.
