Nerd Maker Studio Tie Bomber (Finished)

[akumazeto]

Printed at .01 on My Elegoo Saturn and Mars Pro 2. Siraya Tech Resin blend. Build/Blue/tenacious even split. Nerd Maker X has made a tremendous file-set and I encourage all to purchase his file set from his outlets.

Model-T Bomber - | 3D Print Model

Model available for download in Stereolithography format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[StevenBills]

Excellent! I have printed the wings (1/48 as well), but my body failed. How did you do your supports on that part?

 

[akumazeto]

i printed the body in halves and whole with minimum supports. I used auto supoorts and removed lots of them. But my printers are dialed in and have been for long time.

 

[ganesha7]

Impressive!
The detail on those wings is remarkable.
Please do post the final model once you're finished with your painting magic.

 

[Ogibendogy]

That is a great looking print!

 

[akumazeto]

Excellent! I have printed the wings (1/48 as well), but my body failed. How did you do your supports on that part?

How are you trying to print it? Put it on the bed. Get a wham bam too.

 

[StevenBills]

I printed it standing up as you have done here. I just don't think I supported the center section enough. I need to re-slice and try again.

 

[akumazeto]

I printed it standing up as you have done here. I just don't think I supported the center section enough. I need to re-slice and try again.

All I did was hit auto support in chitubox but again I did all the dialing in long ago for supports shape size depth etc etc etc

 

[akumazeto]

 

[akumazeto]

Also keep in mind ambient temp this time of year. I keep my room at 78 f based on my resin.

 

[StevenBills]

All I did was hit auto support in chitubox but again I did all the dialing in long ago for supports shape size depth etc etc etc

Ah. I do my resin supports in PrusaSlicer and then export to ChituBox to slice. Thanks for the images, I'll re-support the model and see what happens. Also when I'm printing I have a heater in the room set to 75. I don't think my failure was due to temp, just undersupported.

Thanks!

SB

EDIT: Should be good now? I dunno, we'll see tomorrow!

 

[akumazeto]

 

[akumazeto]

I will be offering Asteroid based versions like this for 1300 with lights and a plaque with a proper armature. Lower 48 only. I only plan on doing 10 of these and two are out the door already plus this one. Contact me via pm for more info. As the base comes together it will be posted here.

All Archive X Enamel is used. Feel free to search my previous works.

 

[joberg]

Great looking bomber with the right amount of wear and tear

 

[Zenwalker]

Wow! Nice job!

What type/ brand of leds did you use for the rear lights?

 

[akumazeto]

Wow! Nice job!

What type/ brand of leds did you use for the rear lights?

Some 2mm jobbers I bought 500 of a while back. Cant remember what resistor I used. But you cant pass a prewired led through not enough diameter.

 

[akumazeto]

 

[akumazeto]

 

[akumazeto]

 

[joberg]

Yep, as I said: the right amount of wear and tear